€7.13

Trend Bushing Washers are used to reduce the bore diameter for Trend CraftPro saw blades. They must be pressed or glued into the blade body - loose fittings must not be used. Diameter: 30mmBore: 20mmThickness: 1.7mmFor CraftPro Blade Diameter: 250mm..

€8.16

SNAP/MSH Magnetic Drive Holder & Pozi..

€10.16

1 x Trend SNAP/D/5MM Drill & Adaptor 5mm.The Trend SNAP/D Drill & Adaptor is suitable for use with quick chucks, power drills and impact drivers for drilling fast, clean holes in metal and hardwood. The HSS drill bit is gripped by a spring steel collet into the hex shaft for maximum strength and durability, its high-speed steel construction ensures high wear resistance...

€10.85

Pack of 3 Trend Snappy Square No.3 x 50mm Bits...

€11.18

Pack of 3 Trend NAP/SQ/1 Snappy Square Bits No.2 x 50mmTrend Snappy Screwdriver Bits for driving Square Robertson screws. With a 1/4in hex shank for a direct fit, for impact drivers or all Trend Snappy Chucks, ensuring fast swapping between accessories. A handy addition to the toolkit for work with screws, favoured by the US market and becoming increasingly popular across the globe...

€11.78

Trend SNAP/FB/19 Snappy Flat Bit with a centre point, back tapered cutting edge and ground chip breakers. An economical bit for cutting quick holes in timber...

€12.31

Trend Bushing Washers are used to reduce the bore diameter for certain makes and models of saw blades. They are accurately machined with reamed bores and splined outside edges for a precise fit into the blade bore. NOTE: Only suitable for use with Trend Professional (Waveform) and Industrial saw blades. Loose bushing washers must NOT be used. Diameter: 30mmBore: 16mmThickness: 1.8mm..

€13.46

The Trend PH/COLL/95 Pocket Hole Drill Collar allows the correct depth to be set for pocket holes. Size: 9.5mm..

€13.64

1 x Pack of 5 Trend Mesh Random Orbital Sanding Discs 125mm x 80G.Trend 125mm Mesh Random Orbital Sanding Disc with silicon carbide grit for long-life, 5x longer than conventional abrasives and enhanced performance on all materials. An anti-clogging open coat reduces clogging and allows for faster stock removal, especially on gummy, resinous timbers, fillers and paint removal. The mesh pattern allows unrestricted airflow across the entire sanding base for dust-free sanding. Simply rinse with wa..

€19.71

This Trend Snappy Forstner Bit produces clean, precise holes in softwood and hardwood. It is made from forged steel which provides longer life, with less need for re-sharpening. The Forstner bit features a centre point, two peripheral cutting edges and two lifters. It is compatible with the Trend Snappy Quick-Chuck for fast swaps between other Snappy Accessories. Specification: Diameter: 15mmOverall Length: 80mmShank Diameter: 1/4in Hex..

€20.64

The Trend CSB/16524TC Craft Pro Thin Kerf Saw Blade has the following specification: Diameter: 165mm (6.1/2in)Bore: 15.88mmKerf: 1.6mmPlate Thickness: 1.0mmNO. of Teeth: 24Tooth Form: ATBHook: 15°Trend CraftPro Thin Kerf Saw Blades for cordless saws. Designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particleboard, veneer, plywood, MDF and hardboard. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The bod..

€21.55

The Trend CSB/16524 CraftPro Saw Blade has the following specification: Diameter: 165mmBore: 30mmKerf: 2.4mmPlate Thickness: 1.5mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened an..

€21.55

The Trend CSB/18024 CraftPro Saw Blade has the following specification: Diameter: 180mmBore: 30mmKerf: 2.4mmPlate Thickness: 1.5mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/coarse finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hard..

€21.55

The Trend CSB/19024 CraftPro Saw Blade has the following specification: Diameter: 190mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/coarse finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hard..

€22.38

1 x Trend GB20 Guide Bush 20mmThe Trend Guide Bush guides the router when using a template.It fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 and T11, and some other light-duty routers.Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base...

€22.38

1 x Trend GB28 Guide Bush 28mmThe Trend Guide Bush guides the router when using a template.It fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 and T11, and some other light-duty routers.Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base...

€23.52

The Trend C019 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19.1mm (3/4in)Overall Length: 60mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller route..

€23.52

The Trend CSB/16540T CraftPro Thin Kerf Saw Blade has the following specification: Diameter: 165mm (6.1/2in)Bore: 20mmKerf: 1.5mmPlate Thickness: 1.0mmNo. of Teeth: 40Tooth Form: ATBHook: 15°Trend CraftPro Thin Kerf Saw Blades for cordless saws. Designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particleboard, veneer, plywood, MDF and hardboard. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has..

€23.52

The Trend CSB/18040 CraftPro Saw Blade has the following specification: Diameter: 180mmBore: 30mmKerf: 2.4mmPlate Thickness: 1.5mmNo. of Teeth: 40Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/fine finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally harden..

€23.61

This Trend Storage Case ensures AIR STEALTH VIS dust mask does not get contaminated when not in use. This hard case is made from EVA with ballistic nylon outer and a zip closure. It has multiple storage pockets, ideal for additional filters. Supplied with a removable, fully adjustable shoulder strap...

€24.36

The Trend C005B x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 6mmCutting Depth: 20mmOverall Length: 64mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K' mark sha..

€24.36

The Trend C011 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 7.9mm (5/16in)Cutting Depth: 19.1mm (3/4in) Overall Length: 59.5mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller ro..

€24.36

The Trend C124 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in) Cutting Depth: 12.7mm (1/2in) Overall Length: 55mmShank Diameter: 1/2inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller rou..

€25.49

The Trend CSB/18424A CraftPro Saw Blade has the following specification: Diameter: 184mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/coarse finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally har..

€25.70

Trend replacement Alloy T-Slot Track, suitable for the mitre fence or side pressure of the CraftPro Router Table...

€25.74

The Trend C001A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 3mm (3/8in)Cutting Depth: 9.5mmOverall Length: 56.5mmShank Diameter: 1/4inThe Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers ..

€25.91

The Trend CSB/15024 CraftPro Saw Blade has the following specification: Diameter: 150mmBore: 20mmKerf: 2.4mmPlate Thickness: 1.5mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened an..

€26.00

1 x Pack of 5 Trend Mesh Random Orbital Sanding Discs 225mm x 240G.Trend 225mm Mesh Random Orbital Sanding Disc with silicon carbide grit for long-life, 5x longer than conventional abrasives and enhanced performance on all materials. An anti-clogging open coat reduces clogging and allows for faster stock removal, especially on gummy, resinous timbers, fillers and paint removal. The mesh pattern allows unrestricted airflow across the entire sanding base for dust-free sanding. Simply rinse with w..

€26.00

1 x Pack of 5 Trend Mesh Random Orbital Sanding Discs 225mm x 80G.Trend 225mm Mesh Random Orbital Sanding Disc with silicon carbide grit for long-life, 5x longer than conventional abrasives and enhanced performance on all materials. An anti-clogging open coat reduces clogging and allows for faster stock removal, especially on gummy, resinous timbers, fillers and paint removal. The mesh pattern allows unrestricted airflow across the entire sanding base for dust-free sanding. Simply rinse with wa..

€26.98

The Trend SNAP/OFLD Snappy Offline Driver enables you to use a drill next to walls and in tight spaces. Its outer sleeve rotates allowing secure positioning. The shaft swivels to a 15° angle. Accepts both insert bits and direct drive bits...