€58.12

Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104° x 1/2in.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Chamfer: 45°.1 x Guided Rebater: 9.5mm.1 x Guided Trimmer: 12.7mm.1 x Guided Cove: 6.3mm.1 x V-Groove: 45°.1 x Core Box: R6.35mm.1 x Guided Ogee: R4mm...

€58.81

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied wi..

€59.15

Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mmCutting Depth: 15mmBearing: 16mmShank: 1/4inTrend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longe..

€60.74

The Trend PH/PC/95 Pocket Hole Plug Cutter is made from durable tool steel. Allows plugs up to 52mm long to be created in end grain. For use in a pillar drill to allow plugs to be made to cover the pocket hole pockets. Use with the Trend Pocket Hole Jig. Specification: Overall Length: 94mmShank Diameter: 8mmShank Length: 24mmPlug Size: 9.5mm (3/8in)Max. Plug Length: 52mm..

€63.78

The Trend CSB/CC30524 CraftPro Mitre Saw Blade has the following specification: Diameter: 305mm (12in) Bore: 30mmKerf: 3.0mmPlate Thickness: 2.0mmNo. of Teeth: 24Tooth Form: ATBHook: NEG -5°Trend CraftPro Mitre Saw Blades have tungsten carbide tips. Designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been ..

€63.95

The Trend C030B x 1/2 TCT Two Flute Cutter has the following specification: Cutting Diameter: 19.1mm (3/4in)Cutting Depth: 50.0mm (2in)Overall Length: 92.5mmShank Diameter: 1/2inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for..

€64.76

The Trend SNAP/ASA Angle Screwdriver Attachment allows access to tight corners. A quick-change chuck ensures the bit is held securely. Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks. Specification: Overall Length: 145mmShank Diameter: 1/4in hexMax. Torque: 60Nm..

€68.51

The Trend C078 x 1/4 TC Round Over Two Flute Cutter will cut full bullnose profile for detailing work on 19mm stock. Specification: Cutting Diameter: 31.7mmCutting Depth: 15.9mm (5/8in)Bearing; 1: 9.5mm, 2: 12.7mmRadius: 9.5mmOverall Length: 67.5mmShank Diameter: 1/4inThe Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance o..

€70.11

The Trend CSB/30048 CraftPro Saw Blade has the following specification: Diameter: 300mmBore: 30mmKerf: 2.8mmPlate Thickness: 1.8mmNo. of Teeth: 48Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened an..

€71.17

CSB/25080 Craft Pro Saw Blade 250 x 30mm x 80TMicrogranular tungsten carbide tips for a pro finish in soft/hardwood, plywood, cement bonded board etc.Hardened and tempered, high-grade alloy steel bodySilverbraze to ensure tip is bonded securely to bodyReamed bore to ensure precise fit to spindle..

€74.72

Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin hole or single hole pockets, perfect for wide or for narrow stock components. With reversible depth gauges, ideal for new projects and repair work. Hardened drilling sleeves for accurate, consistent pockets. Works with timber 12.7mm to 38mm thick. Portable and adaptable for multiple jointing styles and applications with tool-free, fast and easy..

€74.84

The Trend CSB/CC30548 CraftPro Mitre Saw Blade has the following specification: Diameter: 305mm (12in) Bore: 30mmKerf: 3.0mmPlate Thickness: 2.0mmNo. of Teeth: 48Tooth Form: ATBHook: NEG -5°Trend CraftPro Mitre Saw Blades have tungsten carbide tips. Designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided.They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been a..

€79.11

The Trend C121CX1/4TC CraftPro Template Profile has a tungsten carbide tip for excellent cutting performance. It is designed for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specification: Shank: 1/4inCutting Diameter: 1/2in (15.9mm)Cutting Length: 25mmOverall Length: 71mm..

€79.42

The Trend CSB/CC30564 CraftPro Mitre Saw Blade has the following specification: Diameter: 305mm (12in)Bore: 30mmKerf: 3.0mmPlate Thickness: 2.0mmNo. of Teeth: 64Tooth Form: ATBHook: NEG -5°Trend CraftPro Mitre Saw Blades have tungsten carbide tips. Designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been a..

€80.68

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core worktops. With a bottom cut feature for plunge cut, slotting and morticing applicat..

€82.94

This Trend CraftPro Table Saw Blade Triple Pack contains a selection of same diameter Tungsten Carbide Tipped circular saw blades, designed for a professional finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. High-grade alloy steel plate body precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to body. With a reamed bore to ensure a precise spindle fit. Laser etched on reverse to European standard EN 847-1/..

€83.11

CSB/AP25480 Craft Pro Saw Blade for Aluminium & Plastic 254 x 30mm x 80TMicrogranular tungsten carbide tips for a professional finish in plastic and alloyHardened and tempered, high-grade alloy steel bodySilverbraze to ensure tip is bonded securely to bodyReamed bore to ensure precise fit to spindle..

€87.41

Precision EDM ground, polycrystalline diamond cutting tips.Use on cement fibreboard, laminate, solid wood etc.Laser cut hardened body.Flat tooth with chamfer tips for a cleaner cut.For portable, bench and mitre saw use...

€87.67

1 x Trend CSB/AP30584 Craft Pro Saw Blade for Aluminium & Plastic 305 x 30mm x 84TMicrogranular tungsten carbide tips for a professional finish in plastic and alloyHardened and tempered, high-grade alloy steel bodySilverbraze to ensure tip is bonded securely to bodyReamed bore to ensure precise fit to spindle..

€107.90

The Trend Template Timber Repair Kit is a unique product that allows oval pockets to be routed, to disguise ugly resin pockets and knots in timber. This is especially useful when softwoods are being used. The template can be used to repair blown workshop joints when care is needed to ensure that the plug is glued in perfectly level. Supplied with a 10mm diameter 1/4in shank cutter, a 20mm guide bush and a 40mm inlay collar. Specification: Patch Size: 120 x 45mmTemplate Size: 400 x 180 x 8mm..

€138.11

Precision made laser cut zinc plated steel template combA 12.7mm (1/2in) box jointIncludes 1 x template comb and 1 x 15.8mm guide bush..

€206.27

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results & life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in a gravity dispenser box. Ideal for display on a trade ..

€206.27

The Trend Loc Blocks Counter Top Unit contains 12 Packs of Trend Loc Blocks. The Trend Loc Block consists of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding, drilling and finishing. No need to use clamps. Sets up in seconds by gripping the workpiece and bench, raising the workpiece from the bench, to allow complete access to every edge. Size when four blocks are interlocked: 173mm x 173mm...

€249.20

5 piece set of straights with centre tips aimed at kitchen fittersIncludes 1/2in diameter x 50mm length worktop cutters with TC centre tipTungsten carbide tip for cutting abrasive materials such as chipboard, MDF, plywood and certain hardwoodsFor housing, grooving and mortisingNon-stick PTFE coated..

€332.85

The Trend T18S/BJK1 Biscuit Jointer has a high-performance motor, built for power and endurance. With a top-mounted sliding switch, easily accessible for left or right-handed operation. Uses a cam-lock rack and pinion height fence for precise height adjustment with cam-lock retention. Milled reference faces provide accurate positioning on all jointing styles. Anti-slip rubber cutter aperture prevents slippage as the cutter engages the workpiece. Supplied with: 1 x CR/BJB100T Biscuit Jointer Bla..

€398.21

The Trend CRT/MK3 CraftPro Router Table has a large, laminated MDF table and a quick-release aluminium extrusion back fence with sliding MDF cheeks. Its removable 6.35mm thick aluminium insert plate has a 98mm diameter aperture pre-drilled for Trend TBC routers, T11 and T14 routers. There is also a quick raiser and quick-release facility for the Trend T11 and T14 routers. The high back fence with a fully adjustable guard assembly and the no-volt release switch provide increased user safety. Oth..

€588.92

1 x Trend T12EK Variable Speed Router 2300W 110V VersionThe Trend T12EK Variable Speed Router is a high-performance trade-focused plunge router with advanced safety features, engineered to deliver reliable, fast, accurate cuts. Its powerful motor delivers consistently high power, torque and speed, and features soft-start to prevent kick-back. With 7-level variable speed control, it gives the user total control across a range of cutters, materials and applications. Automatic power shut-off preve..

€588.92

The Trend T18S/MS184S2 Mitre Saw has a high-performance motor, built for power and endurance. Ideal for carcassing and second fix work, perfect for studwork, floor joists, skirting and architraves. Fitted with a front-mounted laser that allows for accurate, quick alignment for faster cutting. Indented mitre positions, with pre-sets at 0, 15, 22.5 and 45° for fast, accurate mitring. There is also a trenching function for quick set trench stop for grooves and slots. Its compact, lightweight desig..

€689.79

The Trend Kitchen Worktop Cutter Display contains: 30 x BR01 1/2in 50mm Kitchen Worktop Cutters.  Ideal for general purpose trimming & mortising. For use with Trend Worktop Jigs for cutting worktop joints, bolt recesses and sink/hob apertures in laminated chipboard and solid timber. Tungsten Carbide tipped 1.5mm micro-granular tips provide long cutter life. The ground tip face has been polished to 400-grit ensures accurate cutting. It also features ground bottom clearance for optimum waste re..