€26.05

Trend BR01 x 1/2 TCT Two Straight Worktop Router Cutter for general purpose trimming and mortising. Also for use with Trend Worktop Jigs for cutting worktop joints, bolt recesses and sink/hob apertures in laminated chipboard and solid timber.Its tungsten carbide tipped 1.5mm micro-granular tips provide long cutter life. ​The ground tip face, polished to 400-grit, ensures accurate cutting.​ With ground bottom clearance for optimum waste removal. Safety K-Mark indicates the correct cutter shan..

€26.98

The Trend SNAP/OFLD Snappy Offline Driver enables you to use a drill next to walls and in tight spaces. Its outer sleeve rotates allowing secure positioning. The shaft swivels to a 15° angle. Accepts both insert bits and direct drive bits...

€27.04

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 8mm 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. Specifica..

€27.45

Trend CraftPro Circular Saw Blade is of professional quality and can be used by tradesmen and craftsmen to cut a variety of materials including wood, MDF, particle board, hardboard and plywood. This quality Tungsten Carbide Tipped (TCT) blade is compatible with all sawing machines. Specification: Diameter: 160mm (6.1/4in)Teeth: 48Max. RPM: 10000Bore: 20mm..

€27.47

The Trend C019A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19mm (3/4in)Overall Length: 71mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller router..

€27.47

The Trend CSB/21548 CraftPro Saw Blade has the following specification: Diameter: 215mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 48Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/fine finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally harden..

€27.48

The Trend C016 x 1/2 TCT Two Flute Cutter has the following specification: Cutting Diameter: 10mm (25/64in)Cutting Depth: 35mm (1.3/8in)Overall Length: 79mmShank Diameter: 1/2inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for ..

€27.48

The Trend C020 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 19.1mm (3/4in) Overall Length: 59.5mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller ro..

€28.40

The Trend C004 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 5.0mm (13/64in)Cutting Depth: 16.0mm (5/8in)Overall Length: 71.5mmShank Diameter: 1/4inThe Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smal..

€28.52

The Trend CSB/23024 CraftPro Saw Blade has the following specification: Diameter: 230mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 24Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/coarse finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hard..

€28.54

The Trend CSB/21048 CraftPro Saw Blade has the following specification: Diameter: 210mmBore: 30mmKerf: 2.4mmPlate Thickness: 1.6mmNo. of Teeth: 48Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened an..

€28.71

The Trend C021 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12.55mm (1/2in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller router..

€28.95

The Trend CSB/16024 CraftPro Plunge Saw Blade has the following specification: Diameter: 160mmBore: 20mmKerf: 2.4mmPlate Thickness: 1.5mmNo. of Teeth: 24Tooth Form: ATBHook: 15°The Trend CraftPro Plunge Saw Blade is designed to provide a professional finish in particleboard, plywood, MDF and hardboard. It has a high-grade, hardened and tempered, alloy steel plate body that has been precision ground to maintain flatness. Silver brazed to ensure tips are securely bonded to the body. With a reamed..

€29.19

The Trend CSB/21560 CraftPro Saw Blade has the following specification: Diameter: 215mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 60Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/fine finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally harden..

€29.21

The Trend Router Non-Slip Mat is designed to prevent workpieces from slipping on the workbench. It is made from specially formulated PVC and has a thin, open waffle design that is perfect when sanding and routing as it prevents the build-up of dust around the workpiece. The mat's large area allows it to be used as a general-purpose cover to protect the worktop. It can also easily be cut to size for use as smaller non-slip mats if required. Specification: Size: 610 x 1220mm..

€29.42

The Trend CSB/18440A CraftPro Saw Blade has the following specification: Diameter: 184mmBore: 30mmKerf: 2.6mmPlate Thickness: 1.7mmNo. of Teeth: 40Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/fine finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally harde..

€29.83

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have ..

€30.32

These Trend Pocket Hole Screws have a fine thread, square drive and a large dome-shaped head. They are self-tapping for use with a No.2 square drive bit to resist slipping (cam-out). Suitable for use with Pocket Hole Jigs and ideal for hardwoods, such as oak, maple, walnut and cherry. Made from steel with a zinc-coated finish. Size: No.7 (3.9mm) x 30mmDrive: No.2 SquarePack Quantity: 500..

€30.91

The Trend CSB/25048 CraftPro Saw Blade has the following specification: Diameter: 250mmBore: 30mmKerf: 3.0mmPlate Thickness: 2.0mmNo. of Teeth: 48Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened an..

€31.99

The Trend C016C x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 10mm (25/64in)Cutting Depth: 25mm (63/64in)Overall Length: 58mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller rout..

€31.99

This Trend C116AX1/4TC Self-Guided Trimmer has the following specification: Cut Diameter: 12.7mmCutting Depth: 16.0mmShank: 1/4inTrend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT...

€32.48

The Trend C025 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 15.9mm (5.8in)Cutting Depth: 19.1mm (3/4in) Overall Length: 59.5mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller ro..

€32.48

The Trend C025A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 16mm (5/8in)Cutting Depth: 19mm (3/4in)Overall Length: 60mmShank Diameter: 1/4inThe Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller ro..

€32.48

The Trend C028A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 18mm (45/64in)Cutting Depth: 25mm (63/64in)Overall Length: 65mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller rout..

€32.48

The Trend C030 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 19.1mm (3/4in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers..

€32.48

The Trend C030A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 20mmCutting Depth: 20mmOverall Length: 60.5mmShank Diameter: 1/4inTrend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K' mark ..

€32.48

The Trend C041A x 1/4 TCT Dovetail has the following specification: Cutter Angle: 104°Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 12.7mm (1/2in)Overall Length: 60.5mmShank Diameter: 1/4inTrend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards...

€32.61

The Trend CSB/16524T Craft Pro Thin Kerf Saw Blade has the following specification: Diameter: 165mm (6.1/2in)Bore: 20mmKerf: 1.5mmPlate Thickness: 1.0mmNO. of Teeth: 24Tooth Form: ATBHook: 15°Trend CraftPro Thin Kerf Saw Blades for cordless saws. Designed for a professional finish in softwood, hardwood, plasterboard, stone fibreboard, particleboard, veneer, plywood, MDF and hardboard. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body ha..

€32.63

The Trend CSB/25060 CraftPro Saw Blade has the following specification: Diameter: 250mmBore: 30mmKerf: 3.0mmPlate Thickness: 2.0mmNo. of Teeth: 60Tooth Form: ATBHook: 15°These Trend CraftPro Saw Blades have been designed to provide a professional medium/fine finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally harden..

€32.70

The Trend CSB/18440 CraftPro Saw Blade has the following specification: Diameter: 184mmBore: 16mmNo. of Teeth: 40Tooth Form: ATBThese Trend CraftPro Saw Blades have been designed to provide a professional medium finish in hardwood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. They have a high-grade, alloy steel plate body that has been precision ground to maintain flatness. The body has been additionally hardened and tempered to maintain trueness. A reamed ..