€17.61

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.Trend CraftPro Cutter with two ..

€21.43

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 1/4in 6.3mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes.Trend CraftP..

€27.04

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 3/8in 9.5mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes.Trend Craf..

€27.04

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.The Trend CO12AX two flute router cutter is suitable for a wide range of applications such as engraving, g..

€27.45

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.The Trend CO24AX two flute router cutter is suitable for a wide range of applications such as engraving, g..

€27.48

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 25/64 in 10.0mmC - Cutting Length - 3/4in 19.1mmT.C.T. 2 Flutes.Trend C..

€28.21

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 10mmC - Cutting Length - 19.1mmT.C.T.Trend CraftPro Cutter with two flute ca..

€28.46

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D1 3/8 inch D1 9.5 mm Cut length 1 inch Cut length 25.4 mm Shank Diameter 1/4 inch Trend CraftPro Cut..

€32.48

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 1/2in 12.7mmC - Cutting Length - 1 1/4 31.8mmT.C.T. 2 Flutes.Trend Craft..

€32.48

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use..

€51.16

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing.They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard.All cutters are a TCT and have a bottom cut feature.When deep cuts are required, more than one pass should be taken.Shank: 1/4in.Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use..