Trend 2/5 x 1/4 HSS Single Flute Cutter 5.5 x 19mm

€13.26

Trend HSS single flute straight cutter made from a single piece of High Speed Steel, ground with a very fine edge.They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than the TC grades, but can be more suitable for certain applications.These cutters are suitable for grooving, rebating, mortising and drilling, the single flute cutters offer fast free cutting. If you require a cleaner cut please use t..

Add to Cart

Trend 2/3 x 1/4 TCT Single Flute Cutter 4.0 x 11.0mm

€25.71

These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass.Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and cer..

Add to Cart

Trend 2/2 x 1/4 TCT Single Flute Cutter 3.2 x 8.0mm

€33.11

These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass.Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and cer..

Add to Cart