Draper 230V Oscillating Spindle and Belt Sander, 450W (98425)

This oscillating spindle and belt sander has a double configuration with fast, easy changing between spindle sander and belt sander. Dual rotating and vertically oscillating action for fast sanding and improved work rate with reduced chance of burn. The aluminium table tilts 0-45 degrees for easy chamfering and edge work. Maximum versatility and work rate with both intricate, shaped and standard workpieces. Powerful 450W induction motor. Vented throat plates and under-table dust extraction channel. Bench mounted or freestanding operation. Non-latching safety on/off no-volt switch with dust cover. On-board storage for all accessories. Supplied with 100 x 610mm 80 grit sanding belt, sleeves, drums, wrench and throat plates.

• No-volt switch
• Sanding belt, sleeves, drums, wrench and throat plates included
• 0-45 degree tilting table
• 38mm dust extraction facility

Specifications

• Voltage 230V
• Power 450W
• Belt size 610x 100mm
• No load speed 2000rpm
• Sanding sleeves size 13-51mm diameter (x 5 sizes) x 110mm
• Table size 430 x 410mm
• Tilting section 220 x 410mm
• Tilt 0-45°
• Oscillating stroke 16mm
• Dimensions 330 x 390 x 450mm
• Weight 12.9kg

Contents

• 1 x 230V Oscillating Spindle and Belt Sander, 450W
• 1 x Sanding belt (80 grit)
• 5 x Sanding sleeves - 13, 19, 25, 38 and 51mm
• 3 x Throat plates
• 4 x Spindle drums
• 1 x Spindle wrench