€3.54

for professional cleaning of the glow plug shaftcleaning of the shaft is recommended before installation of new glow plugssteel brush length: 105 mm, Ø 9 mm Gross weight 12 g Length 310 mm..

€10.63

for loosening of the retaining ring of injectorsis needed for injector disassemblywith 7.5 mm bore Gross weight 90 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..

€12.20

required when using the sliding hammer BGS 7772-2, 7772, 7776 in conjunction with e.g. hook BGS 7777-5, injector claws BGS 7777-1, 7777-2, 7777-3inside thread M20x1.5 to external screw thread M18x1.5 Gross weight 146 g Material Chrome Molybdenum Steel..

€12.60

Gross weight 74 g Material Chrome Molybdenum Steel..

€12.60

Gross weight 128 g Material Chrome Molybdenum Steel..

€12.99

Gross weight 120 g Material Chrome Molybdenum Steel..

€13.38

knurled Output profile 12-point Drive profile Internal square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 190 g Material Chrome Vanadium Steel Surface finish Polished chromed metal Wrench size 22 mm Packaging suitable for wall hanging Yes..

€14.17

Gross weight 126 g Material Chrome Molybdenum Steel..

€14.17

Gross weight 134 g Material Chrome Molybdenum Steel..

€16.73

12.5 mm (1/2") drive multi-spline socket 1.5 x 58 mmallows changing of the diesel pre-chamberfits on MB engines from 1989suitable for engines with the following codes: 601, 602, 602.91, 603, 604, 605, 606, 661, 662to be used as OEM 603589000900 / 603589010900 Gross weight 228 g Material Chrome Molybdenum Steel Surface finish Phosphated To be used as OEM1 603589000900 | 603589010900 Mercedes-Benz..

€17.32

Output profile 12-point Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 86 g Length 85,5 mm Material Chrome Molybdenum Steel Surface finish Satin chrome plated Wrench size 14 mm Packaging suitable for wall hanging Yes..

€19.48

suitable for most Bosch injectorsfor mounting on the external threadinner ring prevents deformation of the external screw thread Gross weight 142 g..

€19.48

Socket for diesel injectors Output profile 12-point Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 356 g Material Chrome Vanadium Steel Wrench size 27 mm Packaging suitable for wall hanging Yes..

€20.66

Gross weight 820 g..

€22.83

facilitates the disassembly / assembly of Diesel injection pipes on injectors and other pipe fittings Gross weight 144 g Length 120 mm Packaging suitable for wall hanging Yes..

€23.42

for cleaning injector seats and borescompact set compositionsuitable for 6.6 L GM diesel engines LLY and LB7installed in following vehicles:Chevrolet Kodiak/Silverado (HD)GMC Topkick/Sierra (HD)Hummer H1 Alphascope of delivery:1 steel brush1 handle with toggle1 nylon brush20 cleaning swabs Gross weight 214 g..

€23.42

facilitates the disassembly / assembly of Diesel injection pipes on injectors and other pipe fittings Gross weight 162 g Length 120 mm Packaging suitable for wall hanging Yes..

€24.80

facilitates the disassembly / assembly of Diesel injection pipes on injectors and other pipe fittings Gross weight 158 g Length 120 mm Packaging suitable for wall hanging Yes..

€24.80

facilitates the disassembly / assembly of Diesel injection pipes on injectors and other pipe fittings Gross weight 166 g Length 120 mm Packaging suitable for wall hanging Yes..

€25.98

for aligning the injectors to the fuel linesit is essential to have the injectors correctly aligned to avoid the risk of a fractured pipesuitable for Ford Duratorq engines 2.0 / 2.2 / 2.4 DI / TDCI / TDDI, built in Ford Mondeo 2000-2007 / Ford Transit 2000-2006 / Jaguar X-Typemetal bar allows aligning of two injectors at the same time, to be used as OEM 303-678adjustable tool for aligning injectors, to be used as OEM 303-711 Gross weight 288 g Packaging sui..

€26.17

M10 x 1.5 external screw thread of M14 x 1.5 internal screw thread Gross weight 206 g..

€28.54

open double ring spanner, offset and angledsurface finish: satin chrome platedprofile: 12-pointfor hard to reach placessuitable for most diesel engines Gross weight 236 g Material Chrome Vanadium Steel Wrench size 17 mm..

€29.32

for Mercedes-Benz CDI enginespuller claw opening: 13 mminternal thread M12x1.75to be used with CDI injector extractor set (BGS 62635) Gross weight 344 g..

€32.96

for dismantling hard to remove injectorsM18 x 1.5 female threadjaw distance: 12 mm (inside)jaw height: 17 mm75 mm inner distance between claw and the connection of the sliding hammer Gross weight 372 g..

€34.44

for extracting common rail injectorssuitable for the following models:Jaguar and Land Rover 2.7 TDi V6 (276DT & 7G) & 3.6 TDi V8 (368DT) Diesel engines, Land Rover Discovery 3, Discovery 4, new Range Rover, Range Rover Sport and Jaguar X200 S-type, X250 XF, X350 XJto be used as OEM 303-1127 Gross weight 224 g To be used as OEM1 303-1127 Jaguar To be used as OEM2 303-1127 Land Rover..

€35.82

suitable for following tools:injector puller hook BGS 7777-1, 7777-2, 7777-3universal puller BGS 7777-5internal screw thread M18 x 1.5 of external screw hook thread M18 x 1.5 Gross weight 450 g..

€40.15

especially developed for extracting burnt in copper sealing washers from the injector shafthelps to avoid damages to the cylinder headslim construction with conical tip, knurled handle and sliding weight Gross weight 830 g Length 350 mm..

€41.72

the 3-jaw puller allows a safe removal even of stuck injectorsit is not necessary to drill a hole into the injector needle, thus even injector needles, which rotate when drilling a hole can be removed Gross weight 246 g Packaging suitable for wall hanging Yes..

€41.72

for removing the diesel injectors without disassembling the cylinder headsuitable for Mercedes-Benz diesel engines OM 651installed in the following vehicle models:A-Class, B-Class, C-Class, E-Class, S-Class, V-Class, CLA, GLA, GLK, CLS, ML, SLK/SLC, GLCinternal thread: M16 x 1.5 for sliding hammerclaw width: 16 mm Gross weight 268 g..

€42.31

facilitates the extraction of diesel nozzlessuitable for e.g. Bosch and Lucas nozzles with internal thread M8 x 0.75 and M12 x 1.5 / external screw thread M14 x 1.5 Gross weight 1565 g Length 230 mm..