€113.16

especially for disassembling the long gasoline injectorssuitable for the following models:Jaguar and Land Rover 5.0L V8 petrol engines, Jaguar X150, XK Series, X250 (XF), XJ models and Land Rover Discovery 4, new Range Rover, Range Rover Sportto be used as OEM 310-197 Gross weight 1426 g To be used as OEM1 310-197 Jaguar To be used as OEM2 310-197 Land Rover..

€117.10

extra short, only 225 mmsuitable for e.g. Bosch injectors built in BMW, Mercedes-Benz CDI engines OM 611, 612, 613 etc.total length: 350 mm injector pulling claw, 13 mm pulling claw opening with internal thread M12 x 1.75injector tension bolt with external thread M17 x 1.0 & external thread M14 x 1.5 for ball joint adapterinjector sleeve with internal thread M27 x 1.0 & male thread M14x1.5 for ball joint adapteradapter with external thread M12 x 1.75 for pull claw & external thread M10 x 1.5 for..

€122.98

ball joint also allows sliding hammer to be used in confirmed areasallows easy and quick removal of the injectorscope of delivery:sliding hammer with shaft and handle, 4400 gball joint adaptorsadaptor (internal thread): M14 x M14adaptor (internal thread): M17 x M14adaptor (internal thread): M25 x M14adaptor (internal thread): M27 x M14adaptor (external screw thread): M27 x M14adaptor (external screw thread): M20 x M14sockets (slotted, hexagon) for electrical unit: 25 - 27 - 29 - 30 mmbit socket,..

€137.66

suitable for e. g. Mercedes-Benz CDI engines 611, 612 and 613for pulling out stuck common rail injectorsspecial tool construction allows to pull injector with high force Gross weight 1414 g..

€147.40

for extraction of injectorssuitable for Ford 1.0L to 2.0L EcoBoost petrol direct injection enginessuitable for injectors with e. g. original part number CM5G-9F593-FAto be used as OEM 310-206 Gross weight 1416 g..

€147.58

for removing and mounting of fuel injector nozzlessuitable for BMW inline cylinder turbo charged engines with direct injection from 2009to be used as BMW OEM 130270 Gross weight 590 g To be used as OEM1 13 0 270 BMW..

€166.69

suitable for Mercedes-Benz CDI engines, series OM611, OM612, OM613sliding hammer (1.85 kg, length: 470 mm)thread adaptor for mounting on the injector internal thread M27 x 1.0 (injector side), internal thread M16 x 1.5 (sliding hammer side)extractor claw: M16 x 1.5 female thread (sliding hammer side), 12.2 mm claw distance / 15.5 mm claw height, 75 mm distance from connector of sliding hammer to extractor claw, 113 mm total height of extractor clawtotal length with threaded adaptor 500 mmtotal l..

€170.23

for disassembly of hard to remove injectorsspecial construction with pulling rod and sliding clamp for extracting injectors with air hammerssuitable for pneumatic hammer BGS 3515, injector dismantling claw from BGS 7777 and separate claws 7777-1, 7777-2, 7777-3material: S45C / Cr-Mo steeltotal length: 510 mmhandle length: 110 mm Gross weight 2404 g Material Chrome Molybdenum Steel..

€174.36

milling cutter made of HSS steelfor cleaning the sealing seats on the cylinder head or on the injectorscope of delivery:1 universal milling cutter 15 x 19 mm for universal application1 milling cutter 17 x 17 mm for BMW, PSA, Renault, Ford, Delphi and Bosch injectors1 milling cutter 17 x 17 mm for Mercedes-Benz CDI1 milling cutter 17 x 19 mm for Bosch injectors in Mercedes-Benz CRD1 angled milling cutter 17 x 21 mm for FIAT and IVECO1 injector seat cleaner 19 mm with external hexagon 19 mm1 guide..

€177.02

for dismantling and assembling injection nozzles on BMW and Mercedes-Benz petrol injection enginesrequired when renewing the injector seals and injectorssuitable for the following vehicles:BMW models:135is (2008-)335 (2007-)335xi (2007-)535i (2008-),535xi (2008-)550i GT (2010-)750Li (2009-)750i (2009-),X3 3.0i (2007-)X5 (2011-)X5 3.0i (2008-)X6 (2008-)engines: N14 / N18 / N20 / N47 / N54 / N57 / N55 / N63Mercedes-Benz models:C-class (2007-)CLK / SLK (2007-)E-class (2007-)A / CLA / GLA 45 AMG (20..

€182.04

for cleaning of the injectors seats and glow plugs shaftsscope of delivery:4 cleaning brushesbrush holder3 injector seat cutterscutter guideseal pullerbrush holder extension Gross weight 2370 g..

€185.98

for removing the petrol injection nozzlesto be used as Ford OEM 310-206 / Volvo OEM 9997410suitable for the following models:Volvo S60 (2011-2016), V40 (2013-2016); engine: 1.6 T4Ford Fiesta, Focus, Focus RS, Fusion, Mustang, GT, Transit, Transit Connect, Explorer, Expedition, etc.; engines: 1.0EcoBoost, 1.5 EcoBoost I4, 1.6 EcoBoost Sigma, 2.0 GTDI, 2.0 Duratec-HE M14, 2.0 EcoBoost M14, 2.3 EcoBoost, 2.3EcoBoost M14, 2.7 EcoBoost, 3.5 GTDI, 3.5 EcoBoostLincoln Navigator, Continental, MKS, MKT, ..

€189.52

for testing the return flow pressure of common rail systems with piezo injectors from Bosch, VDO / Siemens and Delphidetermined pressure values allow a condition assessment of the piezo injectorsscope of delivery:pressure gauge for Bosch and VDO Siemens Piezo-Injectors, measuring range: -1 to +15 barpressure gauge for Delphi Piezo-Injectors, measuring range: -1 to +3 bartransparent body with drain valve for visual inspection for air bubbles, two quick couplings and drain hoseconnecting hose set ..

€194.83

allows the extraction of Bosch and Siemens HDI injectorsdisassembly of cylinder heads is not necessarysuitable for most vehicles with PSA 2.0 HDI DW10, DW12 engines, also on Toyota, Mazda, Hyundaihigh traction is reached by pulling the cylinder head2 ball bearing puller spindles for injectors with different internal thread diameter2 open sockets for removal of the electric unithigh performance support frame with spindle bearings Gross weight 3680 g..

€201.72

suitable for VW, Audi, Seat, Skoda with direct injection engines and engines with pump-injector unitsto be used as OEM tool kit T10133 + T10163scope of delivery:puller for dismantling FSI injectors, use as T10133/1puller claw for dismantling FSI injectors, use as T10133/2sliding hammer, use as T10133/3cone for mounting the combustion chamber rings use as T10133/53calibration tools for mounting the combustion chamber rings, use as T10133/6, T10133/7, T10133/8built-in pin for mounting the FSI inje..

€221.40

for controlled disassembly of stuck injectorshydraulic cylinder with collar nut is placed together with the special pulling spindles on a puller bridge to pull out the injectorsto be used in combination with injector extractor | for BMW (BGS 8782) and a hydraulic pumpworking pressure: max. 700 barhydraulic piston diameter: 30 mmhydraulic piston stroke: 16 mmHydraulic cylinder diameter: 78 mmscope of delivery:1 hydraulic cylinder internal thread M16 x 1.5 and coupling nut M21 x 1.251 puller spind..

€225.16

for extracting burnt and tightly stuck injectorssuitable for Chrysler 2.5 / 2.8 CRD 16-valve VM engines Gross weight 4368 g Material Chrome Molybdenum Steel..

€229.08

for pulling out hard to remove diesel injectorsto be used with optional sliding hammers BGS 7772-2, 7772, 7776includes the following tools:6 adaptors for installation in the injector thread:inside thread M20x1.5 to inside thread M14x1.0inside thread M20x1.5 to external screw thread M17x1.0inside thread M20x1.5 to external screw thread M18x1.5inside thread M20x1.5 to external screw thread M20x1.0inside thread M20x1.5 to external screw thread M25x1.0inside thread M20x1.5 to external screw thread M..

€229.27

for removing common rail injectors and VAG pumpe nozzle unitsespecially suitable for burnt / stuck injectorsscope of delivery:sliding hammervice clamp for common rail injectorspulling hook for VAG pump nozzle units Gross weight 3782 g..

€244.56

for removing and installing of injector sleevessuitable for Volvo FM12 Truckscope of delivery:1 injector sleeve removing tool, to be used as OEM 99982521 injector sleeve pre-cutter, to be used as OEM 99986881 injector sleeve mounting tool, to be used as OEM 9998253 Gross weight 3150 g To be used as OEM1 9998252 | 9998253 | 9998688 Volvo..

€245.98

for assembly and removal of diesel injectorsvarious adaptors make the kit suitable for most diesel injectorsincludes also the following components:3 different slide hammers1.6 kg, length: 160 mm2.7 kg, length: 460 mm5.1 kg, length: 600 mmpulling claws with fork opening:13.7 x 18 mm, length: 105 mm12.7 x 19 mm, length: 130 mmslotted hexagon sockets, length: 100 mm, 12.5 mm (1/2“) drive: 25 - 27 - 28 - 29 - 30 mminjector extractor, sleeve design with shells: external Ø 35 mm, internal Ø 29 mmspind..

€281.03

for cleaning the sealing surfaces on injectors and in cylinder headssuitable for a variety of common-rail diesel engines from different manufacturers BMW, Citroen, Fiat, Ford, Iveco, Mercedes-Benz, Peugeot, Renaultscope of delivery:reamer (flat) 14 x 14 mmreamer (flat) 15.5 x 15.5 mmreamer (flat) 15 x 19 mmreamer (flat) 17 x 17 mmreamer (flat) 17 x 17.5 mmreamer (flat) 17 x 19 mmreamer (flat) 17 x 19.5 mmreamer (flat) 17 x 20 mmreamer (flat) 18 x 21 mmreamer (flat) 20 x 21 mmreamer (angled) 15.5..

€322.01

for removing and mounting of fuel injector nozzlesscope of delivery:petrol injector removing tool, to be used as OEM 2358417distance gauge for installing injectors, to be used as OEM 2358022 Gross weight 3178 g To be used as OEM1 2358022 | 2358417 BMW..

€395.96

for removing / installing fuel injectorsrequired for installing new injector seal rings and injectorssuitable for the following BMW models:135is (2008-2010)335 (2007-2010)335xi (2007-2010)535i (2008-2010)535xi (2008-2010)550i GT (2010-2013)750i (2009-2013)750Li (2009-2013)X3 3.0i (2007-2010)X5 (2011-2013)X5 3.0i (2008-2010)X6 (2008-2013)scope of delivery:petrol injector tool for BMW N53 to be used as OEM 130180petrol injector tool for BMW N55 to be used as OEM 130270petrol injector tool for BMW ..

€493.48

for precise adjusting of the injection pressure and for checking the opening pressure of the nozzles, spraying shape, tightnessincludes two adaptors M12 x 1.5 & M14 x 1.5 and gauge up to 600 bar Gross weight 3456 g..

€550.35

tester contains gas canister, hand lever and pressure gauge with rubber protectionfor testing of injector nozzlessuitable for all diesel injector nozzles (except CDI pump-injector elements)several characteristics of the injector nozzles can be tested:opening pressurespraying patterntightness of the nozzlegas spraying patternacoustic control (sound pattern)pressure gauge up to 400 barconnecting hose and 3 adaptors included M12 x 1.5 mm, M14 x 1.5 mm and M17 x 0.75 mmlarge base with adaptationfuel..

€702.49

for testing the high pressure oncommon rail systemsdetermined pressure values allow a condition assessment of the high pressure pump, pressure regulator and injectorsin conjunction with an OBD reader, the status of the pressure sensor can also be determinedsuitable for common rail systems Bosch CP1 / CP3, Siemens DCP1 / DCP2, Delphi DFP1 / DFP3, Denso HP1 / HP2 / HP3Scope of delivery:1 pressure gauge, 0 - 2000 bar4 measuring hoses, 500 mm2 hose adaptors, M12 x 1.52 hose adaptors, M14 x 1.56 blin..