€19.95

This socket set has a unique profile specifically designed for VAG Bosch distributor injection pumps. Specially designed sockets for anti-tamper screw sockets. Made from chrome vanadium steel. Supplied in sturdy plastic storage case.Suitable for VAG Bosch® distributor injection pumpsSpecially designed sockets for anti-tamper screw socketsMade from chrome vanadium steelSupplied in sturdy plastic storage caseContents3 x 1/2" Sq. Dr. - 10, 14.4, 26mm2 x 1/4" Sq. Dr. - 7, 12.6mm..

€29.95

This air conditioning and ECU tool kit is designed for removing plastic valve caps and valve cores during servicing and repairs on air conditioning systems in Audi, Volkswagen and Vauxhall/Opel vehicles. The kit includes tamperproof bits for use on ECU, airflow, mass sensors and injection pumps. Made from chrome vanadium steel, the components have a black phosphate finish for corrosion protection, except the SW12mm and SW15mm sockets, which have a satin chrome finish. Supplied in a sturdy plasti..

€29.95

This set is designed for removing damaged wheel nuts, bolts and fixings. Made from chrome molybdenum for durabilty and strength, with a black phosphate finish for corrosion protection. Supplied in sturdy plastic storage case.For removing damaged wheel nuts, bolts and fixingsMade from chrome molybdenum for durabilty and strengthBlack phosphate finish for corrosion protectionSupplied in sturdy plastic storage caseContents3 x Wheel nut sockets - 17, 19, 21mm3 x Twist sockets - 17, 19, 21mm1 x 80mm ..

€34.95

This common rail (CR) diesel injector repair kit includes tools for loosening and removing internal fixings from Bosch, Denso and Siemens injectors. It includes injector ball valve lapping tools and a guide. The tools are made from chrome molybdenum steel with a black phosphate finish, and chrome vanadium steel with a satin chrome finish. The set includes an internal fixing removal tool for Siemens and Denso CR injectors, plus an eight-sided socket for Bosch CR injectors. Supplied in a sturdy pl..

€39.95

This set of 12-point sockets is specially designed for tightening and loosening the injector line nuts on injection pumps and fuel injectors. Made from chrome molybdenum with a satin chrome finish for corrosion resistance. The set includes 14, 17, 19mm and it comes in a sturdy plastic storage case.Suitable for dismantling injector lines on most diesel engines12-point socketsChrome molybdenum with satin chrome finishSet includes 14, 17, 19mmContents3 x Injection line sockets - 14, 17, 19mm..

€39.95

This set of low profile oil filter sockets is designed for improved access in tight spaces. Made from chrome vanadium steel with a satin chrome finish for corrosion protection. The set includes sizes 17, 18.5, 20, 21.5, 23, 24.5, 26, 27.5mm. Supplied inside a sturdy plastic storage case.Low profile sockets for better access in confined spacesChrome vanadium steel with satin chrome finish for corrosion protectionSizes 24, 27, 29, 30, 32, 36, 38mmSupplied in a sturdy plastic storage caseContents7 ..

€39.95

This set of EGT sensor sockets is designed for removing exhaust gas temperature sensors from cars, light commercial vehicles and HGVs. It includes straight and offset sockets with a single hex. (6-point) x 3/8" Sq. Dr. in sizes 13, 14, 17mm. Made from chrome molybdenum steel with black phosphate finish for added durability. Supplied in a sturdy plastic storage case.Straight and offset sockets in single hex. (6-point) x 3/8" Sq. Dr.Chrome molybdenum steel with black phosphate finish for added dur..

€49.95

This set is suitable for dismantling brake calipers when replacing the brake pads. Manufactured from chrome vanadium steel for strength and durability. Wide variety of brake caliper sockets to cater for different vehicle models and requirements. Supplied in a sturdy plastic storage case.For dismantling brake calipers when replacing the brake padsMade from chrome vanadium steel for strength and durabilityWide variety of brake caliper sockets to cater for different vehicle modelsSupplied in sturdy..

€49.95

This set of Torx sockets is made of chrome vanadium steel with a black phosphate finish for corrosion protection. Includes a special 5-point socket for Tesla® battery pack screw removal.Made of chrome vanadium steel with black phosphate finishSpecial 5-point socket for Tesla® battery pack screw removalContents5 x 6-point 1/4" Sq. Dr. sockets - EP4, EP5, EP6, EP7, EP85 x 6-point 3/8" Sq. Dr. sockets - EP10, EP11, EP12, EP14, EP168 x 6-point 1/2" Sq. Dr. sockets - EP18, EP20, EP22, EP24, EP28, EP3..

€49.95

This set of 150mm thin walled wheel nut sockets is made from chrome molybdenum with black phosphate finish. Each socket has a protective nylon sleeve to prevent damage to wheels and is colour-coded for easy size recognition. They are suitable for use with impact wrenches and drivers. The set includes 17, 19, 21mm and comes supplied in sturdy plastic storage case.Extra-long (150mm) thin walled wheel nut socketsChrome molybdenum with black phosphate finishProtective nylon sleeve to prevent damage ..

€49.95

This set is specifically designed for removing locking wheel nuts, rounded wheel nuts and thin-walled sockets without damaging alloy wheels. Made from chrome molybdenum steel with a black phosphate coating for enhanced durability and corrosion resistance. The set includes sizes 17, 18.5, 20, 21.5, 23, 24.5, 26, 27.5mm. Supplied inside a sturdy plastic storage case.Suitable for removing locking wheel nuts, rounded wheel nuts and thin-walled sockets to help prevent scratching alloy wheelsChrome mo..

€49.95

This jumbo hex keys sets is ideal for working with large plant machinery and heavy-duty applications. Made from chrome vanadium steel, which has been correctly hardened and tempered for durability. Each has a coloured anti-slip coating for extra control and is plated for corrosion protection. The set is organised inside an easy release fold-out holder for portability.Ideal for large plant machinery and heavy-duty applicationsForged from hardened and tempered chrome vanadium steelColoured anti-sl..

€49.95

This stud extractor set is made from chrome vanadium steel for strength and durability. Clamping rollers designed to grip stubborn fixings easily. Removes and installs studs without damaging threads. Unscrews left and right threads. Hex end suitable for use with 1/2" Sq. Dr. ratchet or 21mm spanner. Supplied in a sturdy plastic storage case.Made from chrome vanadium steel with corrosion resistant finishClamping rollers designed to grip stubborn fixings easilyRemoves and installs studs without da..

€59.00

This lug nut socket set includes a variety of sizes across five double-ended sockets. The 1/2" Sq. Dr. and 6-point hex ends ensures compatibility with most lug nuts. The radiused corners of the sockets prevent fastener round-off by applying force to the flat sides of the lug nut instead of the corners. It can be used with an impact wrench, making it more efficient and easier to use. Made from chrome molybdenum steel with a black phosphate finish for added durability. Their thin wall design allow..

€59.95

This set of extra-long E-Type sockets is designed for cylinder head maintenance. Made of chrome vanadium steel with a black phosphate finish for corrosion resistance. The set includes E10, E12, E14, E16, E18, E20. Supplied in sturdy plastic storage case.Designed for cylinder head maintenanceMade of chrome vanadium steel with black phosphate finishSet includes E10, E12, E14, E16, E18, E20Supplied in sturdy plastic storage caseContents6 x Extra long E-Type sockets - E10, E12, E14, E16, E18, E20..

€69.95

This set is for removing damaged, frozen, rusted, rounded-off bolts, nuts and screws. Made from chrome molybdenum for durabilty and strength.For removing damaged, frozen, rusted, rounded-off bolts, nuts and screwsMade from chrome molybdenum for durabilty and strengthContents13 x Stripped Lug nut removers - 1/4", 5/16", 3/8", 10mm, 7/16", 12mm, 1/2", 13mm, 9/16", 5/8", 17mm, 11/16", 3/4"10 x Screw extractor and drill bits - 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32"10 x M..