€27.39

1 x Makita Standard Bi-Metal Holesaw 111mm..

€27.45

The Makita 831373-8 Black Cube Tool Bag is made from hard-wearing, nylon woven fabric that has been padded for additional protection. Internally there are two removable dividers, a pocket, and within the lid, there are slots for drill bits, pens or small batteries. It comes with a padded shoulder strap. Specification: Dimensions: 250mm x 250mm..

€27.45

1 x Makita D-03903 TCT Circular Saw Blade 185 x 30mm x 16T.Made of cemented carbide.Does not require frequent sharpening.Best suited to cutting wood, laminated wood, plywood etc.For portable saws...

€27.47

The Makita 198885-7 Guide Rail Connector is made from durable steel for long life. They slide into channels on top and bottom of the guide rail for increased precision and accuracy versus single connector models. Installs quickly and easily with the included Hex Wrench. For use with Makita guide rails, two sets of connectors are required for each joint...

€27.47

1 x Makita D-03919 TCT Circular Saw Blade 185 x 30mm x 40T.Made of cemented carbide.Does not require frequent sharpening.Best suited to cutting wood, laminated wood, plywood etc.For portable saws...

€27.47

The Makita P-23818 Mixed Drill Bit Set contains a selection of the most useful sizes. Contains: 6 x Standard Masonry Bits: 3, 4, 5, 6, 8 and 10mm6 x 3-Point Wood Bits: 3, 4, 5, 6, 8 and 10mm6 x Groundpoint Bits: 3, 4, 5, 6, 8 and 10mm Covers the following applications: steel, cast iron, aluminium, brass, copper, non-ferrous, wood, engineering, automotive, masonry, brick, block, light concrete, fixings, wood, cabinet making, joinery and carpentry...

€27.47

Can be used in rescue situations for fire brigades etc.For cutting a wide variety of materials including metal and glass.Extra thick demolition blade.Demolition in metal, pipe, channels, angle iron and nail embedded wood...

€27.66

Standard Bi-Metal Holesaw 127mmMakita Standard Bi-Metal Holesaw with a vari-pitch tooth design. For cutting steel, aluminium, copper, brass, wood and plastic. Suitable for trunking, conduit, pipe etc...

€27.79

Makita Impact Black Bits are constructed from heat treated S2 special steel for durability and longer service life. 10 piece bit set supplied in a labelled flip case. Contains: 3 x 50mm Phillips Bits: PH1, PH2 and PH3.3 x 50mm Pozi Bits PZ1, PZ2 and PZ3.4 x 50mm TORX Bits: T15, T20, T25 and T30...

€28.00

Makita Pozidriv Torsion Screwdriver Bits are made from high-quality steel with a tough yet flexible torsion zone. Cushions peak torque during hard applications and helps extend the bit life condsiderably. Supplied with a handy storage case...

€28.14

1 x Makita Standard Bi-Metal Holesaw 121mmMakita Standard Bi-Metal Holesaw with a vari-pitch tooth design. For cutting steel, aluminium, copper, brass, wood and plastic. Suitable for trunking, conduit, pipe etc...

€28.33

This Makita Performance SDS Plus Drill Bit has the following specification: Diameter: 16mmOverall Length: 450mmWorking Length: 400mmMakita Performance SDS Plus Drill Bits have an aggressive design, the durable carbide tip allows for easy centring and spot drilling. Its patented, high-volume, multi-flute quickly channels the drilling dust from the hole. Designed for regular professional use in the toughest materials...

€28.34

Makita E-05228 Ultimate 3-Way Hammer & Tool Holder can be worn in 3-ways including attached to a belt. The holder swings to ensure that tools are always held in a vertical position and the intensity of the swing can be adjusted. Stainless steel hammer holder. Two real leather holders are ideal for the essentials whilst elastic loops on the front provide convenient and easy storage. Can be worn on any Makita tool belt or normal clothing belt. Specification: Length: 185mmWidth: 85mmHeight: 205m..

€28.50

1 x Makita Standard Bi-Metal Holesaw 114mmMakita Standard Bi-Metal Holesaw with a vari-pitch tooth design. For cutting steel, aluminium, copper, brass, wood and plastic. Suitable for trunking, conduit, pipe etc...

€29.27

The Makita E-05527 Bucket Tote Tool Organiser has 10 internal pockets and 3 elasticated front pockets for great flexibility. With a universal size, meaning it will fit most sizes of bucket. Fully adjustable with quick-release buckles. Specification: Length: 470mmHeight: 320mm..

€29.40

Specialised Reciprocating Blade 200mm 14 TPI (Pack 5)Makita Specialised Reciprocating Blades for fast cuts in metals, steel, alloys, cast iron, wood with nails, steel pipe etc. Made from bi-metal material, meaning the blade is flexible and resists snapping. Cuts wood and metal. Tooth Type/Set: A - Milled and Side Set Teeth..

€29.40

Specialised Reciprocating Blade 200mm 18 TPI (Pack 5)Makita Specialised Reciprocating Blades for fast cuts in metals, steel, alloys, cast iron, wood with nails, steel pipe etc. Made from bi-metal material, meaning the blade is flexible and resists snapping. Cuts wood and metal. Tooth Type/Set: A - Milled and Side Set Teeth..

€29.42

The Makita B-07967 MForce™ Portable Saw Blade has the following specification: Blade Diameter: 190mmBore: 20mmKerf: 2mmRake: 15ºThickness: 1.2mmTooth Count: 12The Makita MForce™ Portable Saw Blades have a revolutionary tooth design that sets a new benchmark for blade technology. The dual bevelled tooth face has sharper cutting edges and the M-shape is like doubling the tooth count per blade. A greater wear area and more cutting surfaces means the MForce™ blade will last up to 2x longer than tra..

€29.45

1 x Makita E-05359 Black Leather Belt, Medium Length: 1130mmHeight: 38mmThe Makita Leather Belt is made from a single piece of premium cow leather. The belt buckle and loop are made from the highest quality nickel. The belt can be adjusted for a better fit, simply unscrew and cut the belt to the correct length. Suitable for both work and everyday wear...

€29.45

1 x Makita E-05365 Black Leather Belt, Large Length: 1330mmHeight: 38mmThe Makita Leather Belt is made from a single piece of premium cow leather. The belt buckle and loop are made from the highest quality nickel. The belt can be adjusted for a better fit, simply unscrew and cut the belt to the correct length. Suitable for both work and everyday wear...

€29.45

1 x Makita E-05387 Brown Leather Belt, Large Length: 1330mmHeight: 38mmThe Makita Leather Belt is made from a single piece of premium cow leather. The belt buckle and loop are made from the highest quality nickel. The belt can be adjusted for a better fit, simply unscrew and cut the belt to the correct length. Suitable for both work and everyday wear...

€29.52

Used in the joining of panels and joints in cabinet makingSize: 10Pack Quantity: 1,000..

€29.88

The Makita B-09204 Circular Saw Blade is suitable for wood cutting, with the most popular cordless circular saw models. Specification Diameter: 85mmBore: 15mmTeeth: 20TRake: 10°Kerf: 1mmThickness: 0.7mmThe Makita Specialized Circular Saw Blade is designed for wood cutting with the most popular cordless circular saw models. It has ultra-thin, perfectly tensioned steel plates for true run. Made from precision-honed, high-grade carbide for easy, smooth cuts and long life...

€30.20

D-03333 TCT Circular Saw Blade 165 x 20mm x 24TMade of cemented carbide.Does not require frequent sharpening.Best suited to cutting wood, laminated wood, plywood etc.For portable saws...

€30.53

Specialised Reciprocating Blade 280mm 10 TPI (Pack 5)Makita Specialised Reciprocating Blades for fast cuts in metals, steel, alloys, cast iron, wood with nails, steel pipe etc. Made from bi-metal material, meaning the blade is flexible and resists snapping. Cuts wood and metal. Tooth Type/Set: A - Milled and Side Set Teeth..

€30.69

Pack of 5 Makita Wood Reciprocating Blade 300mm 6 TPIMakita Wood Reciprocating Blades for quick cuts in wood, plastics and polystyrene foam. Suitable for curves and bevels. Tooth Type/Set: C - Ground and Side Set Teeth..

€31.32

The Makita D-15300 Cold Chisel Hex Shank, 30 x 400mm, is both forged and tempered.The shank provides a good, cost effective cutting performance.Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement. Specifications: Size: 30 x 400mm.Shank: 30mm A/F.  The Makita D-08707 Cold Chisel Hex Shank is both forged and tempered.The shank provides a good, cost effective cutting performance.Symmetrical head-geometry with centring-tip for optimised results in the e..

€31.96

1 x Makita P-13063 Cold Chisel Hex Shank 17 x 450mmThe Makita Hex Shank Cold Chisel has been forged and tempered for additional strength. Suitable for applications in concrete, demolition etc. Fits all standard 17mm A/F hex shank drills including Makita HR3520, HM0810, HM0810T and HM1130...

€32.13

1 x Makita Diamond Drill Bit 10mmThe Makita Diamond Drill Bit will penetrate all tiles including grade 5 porcelain, vitreous ceramics and granite with ease and speed. Diamond-coated for excellent quality and long life. The supplied drilling guide ensures an accurately placed hole every time, and the integral water reservoir not only acts as a coolant but also helps keep the dust down. Ideal for repetitive drilling in ceramic tiles. Note: MUST be used with the wet coolant feeder (supplied)...

€32.13

1 x Makita Diamond Drill Bit 5mmThe Makita Diamond Drill Bit will penetrate all tiles including grade 5 porcelain, vitreous ceramics and granite with ease and speed. Diamond-coated for excellent quality and long life. The supplied drilling guide ensures an accurately placed hole every time, and the integral water reservoir not only acts as a coolant but also helps keep the dust down. Ideal for repetitive drilling in ceramic tiles. Note: MUST be used with the wet coolant feeder (supplied)...