€32.86

Specialised Reciprocating Blade 280mm 10 TPI (Pack 5)Makita Specialised Reciprocating Blades for fast cuts in metals, steel, alloys, cast iron, wood with nails, steel pipe etc. Made from bi-metal material, meaning the blade is flexible and resists snapping. Cuts wood and metal. Tooth Type/Set: A - Milled and Side Set Teeth..

€33.03

Phillips Auto-Feed Screwdriver Bit PH2 5 x 157mm Pack of 3Made from heat-treated S2 alloyed steelDesigned for smooth operation in auto-feed screwdriverMinimises screw jamming by precise applicationUseful long length bit for use with impact driversLaser branded with bit-type for easy user identification..

€33.03

Pozidriv Auto-Feed Screwdriver Bit PZ2 5 x 157mm Pack of 3Made from heat-treated S2 alloyed steelDesigned for smooth operation in auto-feed screwdriverMinimises screw jamming by precise applicationUseful long length bit for use with impact driversLaser branded with bit-type for easy user identification..

€33.03

Pack of 5 Makita Wood Reciprocating Blade 300mm 6 TPIMakita Wood Reciprocating Blades for quick cuts in wood, plastics and polystyrene foam. Suitable for curves and bevels. Tooth Type/Set: C - Ground and Side Set Teeth..

€33.56

Bi-metal bladeSuitable for deep plunge cutting in wood, abrasive wooden materials, plasticsAlso to cut-off small non-ferrous metal pipes and profiles, non-hardened nails and steel profiles with smaller dimensions..

€33.72

The Makita D-15300 Cold Chisel Hex Shank, 30 x 400mm, is both forged and tempered.The shank provides a good, cost effective cutting performance.Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement. Specifications: Size: 30 x 400mm.Shank: 30mm A/F.  The Makita D-08707 Cold Chisel Hex Shank is both forged and tempered.The shank provides a good, cost effective cutting performance.Symmetrical head-geometry with centring-tip for optimised results in the e..

€34.35

1 x Makita D-61145 Diamak Diamond Blade 230 x 22.23mm.Entry-level economical blade.Segmented rim for cutting most masonry materials, slabs, bricks, blocks, sandstone, slate and limestone.Can be used either wet or dry...

€34.39

1 x Makita P-13063 Cold Chisel Hex Shank 17 x 450mmThe Makita Hex Shank Cold Chisel has been forged and tempered for additional strength. Suitable for applications in concrete, demolition etc. Fits all standard 17mm A/F hex shank drills including Makita HR3520, HM0810, HM0810T and HM1130...

€34.39

Standard Bi-Metal Holesaw 152mmMakita Standard Bi-Metal Holesaw with a vari-pitch tooth design. For cutting steel, aluminium, copper, brass, wood and plastic. Suitable for trunking, conduit, pipe etc...

€34.42

1 x Makita B-32007 MForce Portable Saw Blade 165 x 20mm x 24T.The Makita MForce™ Portable Saw Blades have a revolutionary tooth design that sets a new benchmark for blade technology. The dual bevelled tooth face has sharper cutting edges and the M-shape is like doubling the tooth count per blade. A greater wear area and more cutting surfaces means the MForce™ blade will last up to 2x longer than traditional blades. A narrow kerf and plate reduces friction allowing for a lighter feed pressure, pr..

€34.58

1 x Makita Diamond Drill Bit 5mmThe Makita Diamond Drill Bit will penetrate all tiles including grade 5 porcelain, vitreous ceramics and granite with ease and speed. Diamond-coated for excellent quality and long life. The supplied drilling guide ensures an accurately placed hole every time, and the integral water reservoir not only acts as a coolant but also helps keep the dust down. Ideal for repetitive drilling in ceramic tiles. Note: MUST be used with the wet coolant feeder (supplied)...

€34.58

1 x Makita Diamond Drill Bit 6mm..

€34.58

1 x Makita Diamond Drill Bit 7mmThe Makita Diamond Drill Bit will penetrate all tiles including grade 5 porcelain, vitreous ceramics and granite with ease and speed. Diamond-coated for excellent quality and long life. The supplied drilling guide ensures an accurately placed hole every time, and the integral water reservoir not only acts as a coolant but also helps keep the dust down. Ideal for repetitive drilling in ceramic tiles. Note: MUST be used with the wet coolant feeder (supplied)...

€34.58

1 x Makita Diamond Drill Bit 8mmThe Makita Diamond Drill Bit will penetrate all tiles including grade 5 porcelain, vitreous ceramics and granite with ease and speed. Diamond-coated for excellent quality and long life. The supplied drilling guide ensures an accurately placed hole every time, and the integral water reservoir not only acts as a coolant but also helps keep the dust down. Ideal for repetitive drilling in ceramic tiles. Note: MUST be used with the wet coolant feeder (supplied)...

€35.28

Phillips Auto-Feed Screwdriver Bit PH2 5 x 177mm Pack of 3Made from heat-treated S2 alloyed steelDesigned for smooth operation in auto-feed screwdriverMinimises screw jamming by precise applicationUseful long length bit for use with impact driversLaser branded with bit-type for easy user identification..

€35.32

Compatible with the Makita 9035KB Orbital Sander and PC1100 Concrete Planer.Collects shaving and dust particles.Maintains the health of the operator and a clean environment.Complete with fastener...

€35.44

D-20694 Scaling Chisel Hex Shank 50 x 280mmForged and tempered scaling chisel.Good cutting performance.For concrete, demolition, render and chasing applications...

€36.13

The Makita 83100BJA Nylon Filter fits the Makita 440 Wet & Dry Vacuum Extractor...

€36.32

1 x Makita 763620-8 Collet Cone 6mm Compatible Die Grinder Model: 906.Makita Collet Cones for Die Grinders. Manufactured from high-quality materials for added durability and long life. Installs quickly and easily for user convenience. Use the correct diameter collet for the shank of the tool. Application: Metal Grinding and Polishing...

€36.32

This Makita Performance SDS Plus Drill Bit has the following specification: Diameter: 18mmOverall Length: 450mmWorking Length: 400mm..

€36.97

The Makita E-16732 TCT Drill Bit Set for drilling into a wide variety of materials including steel, brick, tile, resin, wood and aluminium. Supplied in a handy case with a clear cover. Contains: 5 x TCT Drill Bits: 4 x 90mm, 5 x 100mm, 6 x 100mm, 8 x 120mm and 10 x 150mm...

€37.52

This Makita Performance SDS Plus Drill Bit has the following specification: Diameter: 20mmOverall Length: 300mmWorking Length: 240mmMakita Performance SDS Plus Drill Bits have an aggressive design, the durable carbide tip allows for easy centring and spot drilling. Its patented, high-volume, multi-flute quickly channels the drilling dust from the hole. Designed for regular professional use in the toughest materials...

€37.80

Makita E-10730 Drill & Screw Bit Set in a well laid-out case, each item has its own section and is clearly marked out. Contains: 3 x 25mm Phillips Bits: PH1, PH2, PH3.7 x 25mm Pozi Bits: PZ1(x2), PZ2(x3), PZ3(x2).10 x 25mm Slotted Bits: 0.5 x 3(x2), 0.5 x 4(x2), 0.6 x 4(x2), 1.0 x 6(x2), 1.2 x 7, 1.2 x 8mm.6 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30.4 x 25mm Hex: 3, 4, 5, 6. 4 x 50mm Phillips Bits: PH1, PH2(x2), PH3.5 x 50mm Phillips Bits: PZ0, PZ1, PZ2(x2), PZ3.3 x 50mm Slotted Bi..

€37.80

The Makita P-33788 SDS Plus Adaptor Chuck converts SDS Plus hammer to keyless 3 jaw chuck...

€37.88

The Makita DECADP05 LXT Charging Adaptor provides 2 USB charging ports, each with an output of 2.1A. Suitable for phones, tablets or any device that can be charged from a USB port. A handy built in belt clip allows total portability whilst charging. Compatible with all Makita 18V LXT Li-ion batteries...

€38.83

1 x Makita D-80117 Diamond Wheel 230 x 22.23mmMakita Diamond Wheel for cutting concrete, brick, limestone and roof tiles...

€38.83

1 x Makita D-80117 Diamond Wheel 230 x 22.23mmMakita Diamond Wheel for cutting concrete, brick, limestone and roof tiles...

€39.57

The Makita E-07060 Screw Bit and Socket Set consist of drill bits, screw bits, and etc. Applicable to multi type tasks. The bits are colour coded for quick identification. Supplied in a plastic clear cover case. Contains: 4 x 25mm Phillips Bits: PH1, PH2x2 and PH3.3 x 25mm Pozi Bits: PZ1, PZ2 and PZ3.2 x 25mm Slotted Bits: SL5.5 and SL6.5.3 x 25mm TORX Bits: T20, T25 and T30.4 x 25mm Hex Bits: H3, H4, H5 and H6. 4 x 50mm Phillips Bits: PH1, PH2x2 and PH3.1 x 50mm Pozi Bit: PZ2.1 x 50mm Slotted..

€39.61

The Makita E-05533 Tool Organiser Wrap holds over 30 hand tools and accessories. Cascaded bands provide optimal tool placement whilst anti-slip webbing provides extra security. There is also a handy front pocket for storing accessories. Easy grab-and-go styling keeps your tools right at hand. Quick-release external buckles for added security during transportation. Specification: Dimensions: 350 x 45 x 195mm..

€40.12

No.21 Flexible Cut Metal Reciprocating Blade (Pack 5)Metal cutting.Strong HSS blade for quick cutting of steel plate and iron pipe.Tooth Type/Set: B - milled and wavy set teeth...