€14.66

Repair kit for 0320 and 0310 slate cutters...

€17.24

Edma Spare Hot Wire for the EDM260155 Horizontal Hot Wire Cutting Table. Specification: Overall Length: 1370mm..

€19.76

Spare Wire Roll for Edma EDM367155 Foldable Hot Wire Cutting Table...

€53.04

Designed for cutting plastic sections, rubber glazing joints, decorative mouldings, tile trim and PVC tape. Cutting shears for standard corners and angles. 56 mm utility knife blade. Special features: cuts from 0° to 45° . Ergonomic design...

€56.26

Direct setting along the line of the hole.Sprung handles.Can be used with minimum effort...

€60.31

Plier type roof slate tile cutter with spring loaded handles. Approx length: 300mm (12 in). Will cut slate up to 7mm (9/32 in) thick...

€77.69

Very well balanced design.Comfortable bi-component handle.Ideal for fixing heavy sheet and insulation on roof.Magazine Capacity: 175 staples.Staples Used: 6, 10, 14mm...

€84.47

Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench...

€87.67

Profil Stud Crimping Tool, also known as section setting pliers. Suitable for stud and track. With a patented punch that means fastening is 60% stronger. Specification Length: 350mm (14in)Capacity: 1 + 1mm (18 + 18 gauge); (0.039 + 0.039in)Weight: 936g (33oz)..

€90.60

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutting length: 35 mm per single pressure. Cutting width: 2.8 mm (0.109in)...

€1,000.93

Edma EDMAPLAC 450 Rack and Pinion Panel Lifter lifts plasterboard in every position: horizontal (ceiling installation), angled (sloping ceiling installation) and vertical (wall installation). Its rack and pinion system allows to lift plasterboards with less effort than other panel lifters.It has 3 wheels, 2 with brakes. The innovative braking system with 2 handles (main brake + safety brake) allows you to lower the panel quickly under control. The ergonomic design with bi-material handle allows ..

€1,071.46

Edma Foldable Hot Wire Cutting Table for styrofoam panel, especially for E.T.I.C.S. applications. Provides a clean cut without polystyrene beads projection. Suitable for expanded and extruded polystyrene (E.P.S. and X.P.S.). CE certified. Supplied with: 2 x Wire Rolls and 1 x Carry Case. Specification: Transformer : 42V / 240W / 230VAdjustable Cutting Height: 810 to 1400mmMax. Depth : 320mm..