€103.60

This robust pair of pin-type axle stands have a hardened steel locking pin. The flat circular saddle has an integrated rubber saddle pad, to prevent damage to the underside of the vehicle when in operation. It also provides extra grip to prevent slippage. The saddle height is adjustable with five settings to choose from between 350-555mm. Each stand has a wide tripod base for increased stability.Hardened steel locking pinAdjustable saddle heightIntegrated rubber saddle prevents damage and slippa..

€103.60

This robust pair of pin-type axle stands have a hardened steel locking pin. The flat circular saddle has an integrated rubber saddle pad, to prevent damage to the underside of the vehicle when in operation. It also provides extra grip to prevent slippage. The saddle height is adjustable with five settings to choose from between 350-555mm. Each stand has a wide tripod base for increased stability.Hardened steel locking pinAdjustable saddle heightIntegrated rubber saddle prevents damage and slippa..

€107.58

FEATURES:Manual fluid extractor which easily extracts fluids from inaccessible areas by simply immersing the suction probe. Engine oil can be extracted by inserting the suction probes into the dipstick hole. Can be used with non-corrosive fluids such as; engine oil, gear oil, coolant, water, PAS fluid etc. Fitted with a quick release air pressure adaptor. Supplied with 3 nylon suction probes.SPECIFICATION:Reservoir capacity 9LDimensions 250 x 320 x 620mmWeight (empty) 4kg..

€109.58

FEATURES: Ratchet-type action. Large saddle (29 x 107mm). Display carton. VAT Rated At:20.00%Barcode:5010559308835Outer Box Qty1Weight15.930kgs  View product in our catalogue: Page 200 View more products in this category SPECIFICATION:Minimum height   ...   400mmMaximum height   ...   630mmCapacity (max. per stand)   ...   6000kg (S.W.L.)Capacity (per pair)   ...   12000kg (S.W.L.)BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthus..

€111.57

FEATURES: Expert Quality, for fast accurate alignment of flywheel pilot hole with clutch drive plate when assembling to vehicles. Supplied with eight precision manufactured steel bushes and three expanding mandrels. Suitable for most cars and light commercial vehicles. Display packed in storage case. VAT Rated At:20.00%Barcode:5010559232383Outer Box Qty10Weight1.710kgs  View product in our catalogue: Page 144 View more products in this category CONTENTS:   3 expanding mandr..

€113.01

FEATURES:This robust short-arm threaded nut riveter is suitable for rivet nuts in aluminum, steel and stainless steel. The short arms offer effortless functionality and allow access to hard-to-reach restricted areas. Steel riveter head and steel arms, with PVC moulded hand grips. Fitted with thumbwheel to unscrew the threaded nut rivet. The set includes five rivet nut adaptors - M3, M4, M5, M6 and M8. Length 290mm.Size: 290mmSPECIFICATION:Length: 290mmWeight: 600gCONTENTS:5 x Rivet nut adaptors ..

€113.56

FEATURES:Storm Force® dual action polisher, attached with a 150mm hook and loop backing pad. The variable speed control, constant electronic speed control, soft grip guide handles and powerful 900W motor combine to create an ideal polisher for polishing paintwork on cars, caravans, boats etc. Supplied with backing pad, polishing sponge, wrench, spare brushes, 5M (approx.) cable and approved plug.SPECIFICATION:Voltage 230V- 50HzRated input 900WDisc capacity 150 mm with 9mm orbitSpindle thread M14..

€117.46

This heavy-duty engine stand is suitable for a wide variety of engines and transmissions. The mounting head swivels 360° to enable access to all components of the engine. The mounting pins are fully adjustable. The stand is fitted to two swivel castors to provide easy mobility and to aid positioning. The large H-frame steel chassis provides excellent stability. Maximum load 450kg.360° swivelling head for access to all engine componentsFully adjustable mounting pins to accept a wide range of engi..

€120.87

FEATURES:Vast selection of commonly used hand tools ideal for the workshop and around the home presented inside a storage case. Featuring a 72-tooth reversible ratchet, 8oz claw hammer, water pump pliers, mini hacksaw, a utility knife with retractable blades, boat level and a wide selection of screwdrivers, screwdriver bits, hex keys, spanners and sockets. All of the tools are supplied inside a sturdy blow moulded plastic storage caseCONTENTS:12 x 1/4" Draper HI-TORQ® six-point sockets: 4, 4.5, ..

€120.87

FEATURES: 3/8” PVC hybrid air hose, providing 18/54 bar working/burst pressure. The 8 x 12mm thick airline stops in any position and is attached to a 180° ceiling/wall mounting bracket and the slow return mechanism delivers excellent user safety. Fitted with an internal rewind guide prevents hose tangling. Supplied with 1/4 BSP threaded connectors. VAT Rated At:20.00%Barcode:5010559150489Outer Box Qty1Weight5.032kgsLength10M  View product in our catalogue: Page 655 View more pro..

€121.53

FEATURES: Expert Quality, block or combustion leak tester for determining if CO² is present in a vehicle's cooling system. CO² in the cooling system can indicate a head gasket leak, cracked block or a warped head, etc. Simple to operate by adding blue detector fluid to the tester and placing tester onto the radiator; air is drawn through the liquid which will change colour to yellow if CO² is present. Can be used in conjunction with a cone adaptor or an adaptor within the Draper Radiator Pres..

€122.71

Microprocessor controlled battery charger suitable for lead-acid, Gel, AGM and MF batteries. Fitted with a large easy to read LCD screen and a mode selection control panel, polarity protection, onboard power cord storage, clamp holder and 2 x USB ports. The rugged housing helps protect the internal microprocessor and is fitted with heavy-duty carry handles.Specification:Charging output: 12/24VInput: 230V - 13ACharging current effective: 2A, 5A, 8A @24V /2A, 5A, 8A, 16A @ 12VCharging current (ave..

€122.79

FEATURES: Manufactured and certified to Directive 86/217/EECExpert Quality, new and improved MK4 airline inflator. The industry standard air-line inflator with twin open-ended hold on connectors. The industrial quality fabrication make it suitable for use on garage forecourts and tyre fitting bays. Fitted with a twin open ended connectors, 20% larger viewing window, stronger yet lighter body and increased accuracy. Supplied with calibration certificate. A professional quality inflator d..

€123.52

Power Pack/Booster fitted with compressor, work light and 12V DCsocket and USB sockets. Designed for starting petrol and diesel engines with flat batteries, whilst also supplying 12V DC to power 12V electrical devices from the inbuilt 12V DC output socket. Fitted with a LED worklight for use in dark environments and a built-in compressor. Each power pack is also attached with a battery voltage meter, polarity indicator, USB output, air pressure gauge, air compressor accessories compartment, nega..

€124.71

FEATURES:Robust model with stainless steel tank. The 30L tank is designed to pick up wet and dry materials. Ideally suited for use in workshops and around the home and garden. 5M (approx.) cable and approved plug. Fitted with on-board tool storage facility, castors for easy movability, carry handle, large drain plug, quick release clasps, dust clearing button and blower feature. Display carton.SPECIFICATION:Rated input 1600WTank volume 30LPower take off rating N/AVacuum pressure 18kPaMax. airflo..

€127.60

FEATURES:The Draper Expert Quality HI-TORQ® metric ratchet combination spanners in this 12-piece set are manufactured from hardened and tempered chrome vanadium steel, with black electroplating for corrosion protection. The 100-tooth ratchet enables 3.6° movement and the open end is set at 15°, making these spanners ideal for use where there’s limited space. The ring end is 12-point HI-TORQ®, providing a superior grip; with Draper HI-TORQ®, the spanners grip the flats of the fastener rather than..

€128.54

FEATURES:These engine support beams are designed to position the engine when replacing the engine mounts. They are also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork.Manufactured to EN13155 SpecificationCapacity 300kg..

€128.85

FEATURES:12V portable and versatile jump starter. Fitted with LED battery charge indicators, 12V output socket, USB output socket, LED work light, polarity inversion and 150 PSI air compressor with pressure gauge. 1M (approx) cables with insulated clamps. Supplied with 3 inflation nozzles, 230V mains charger and 12V DC charger.SPECIFICATION:Output Voltage 12VStarting current 300APeak current 800ABattery 15Ah (sealed lead)Dimensions 320 x 180 x 325mmWeight 7kg..

€143.89

FEATURES:Easy to use microprocessor controlled 12V battery charger that delivers a continous 70 Amp charge, with its powerful engine start. Mode selection control panel with charge button and ability to select the charge rate: 2A, 5A, 10A, 20A and 30A. There is an LCD screen with easy to read icons. Rugged design fitted with on-board cord storage and clamp holder. There is also a LED worklight and two USB ports for charging mobile devices. Battery reconditioning (desulphation) mode and built-in ..

€147.73

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains.Adjustable outer extension clamps with rubber feetDesigned to position the engine when replacing the engine mounts. Also suitable for aiding the removal..

€147.73

FEATURES: Expert Quality, six position multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be removed with minimal effort by use of the hydraulic puller. Supplied with instruction manual. Packed in blow mould carrying case with display sleeve. VAT Rated At:20.00%Barcode:5010559500949Outer Box Qty4Weight4.775kgs  View product in our catalogue: Page 206 View more products in this category CONTENTS:   hydraulic pump   3 puller legs ..

€149.00

This premium quality kit includes a vast selection of commonly used tools for the workshop, garage and around the home arranged inside a steel cantilever toolbox. Featuring two 72-tooth reversible ratchets, 16oz claw hammer, combination pliers, long nose pliers, a range of screwdrivers, a tape measure and a wide selection of combination spanners, screwdriver bits, sockets. Lining the toolbox are high density foam inserts to help organise storage and clearly spot when tools are missing. Cantileve..

€149.19

FEATURES:Comprehensive range of commonly used hand tools for the workshop and around the home. The sockets and many of the hand tools featured are manufactured from chrome vanadium steel, correctly hardened and tempered. The tool kit includes 1/2” and 1/4” square drive 72-tooth reversible ratchets, self-grip pliers, extension bars and a wide range of spanners, screwdrivers, screwdriver bits and square drive sockets. All the tools are organised inside a sturdy blow moulded plastic storage boxCONT..

€153.49

FEATURES: For the degreasing of component parts prior to assembly. Polyethylene construction with lid. Fitted with approved plug and 2M approx cable. Carton packed.Features:•   Removable stainless steel filter mesh•   Flexible fluid delivery pipes with inline cleaning brush•   Fully enclosed electric pump and fully screened pump housing•   Draining shelf keeps parts out of cleaning solution during inspection and drying during inspection•   Not suitable for use with solvent based cleaning flui..

€159.24

Powerful electric impact wrench and socket kit, ideal for mechanics, steel erectors, fitters, engineers and car enthusiasts. The massive 480Nm of torque makes light work of removing rusted - on or overtightened nuts and bolts. The ergonomic lightweight design is fitted with a soft grip anti slip handle, providing comfort even when used for prolonged periods. Fitted with a full metal gear box, an electric brake, thermal overload protection, forward/reverse rocker switch trigger and 6M of rubber c..

€163.00

Designed for use in mechanical, electrical, plumbing, heating and building fields, a versatile high-performance inspection camera engineered to provide excellent performance in all hard to inspect places and with the added benefit of having a waterproof camera for submerged applications. The large 3.5" LCD screen features image capture, record and playback functions and the super bright 6 LED lights to help illuminate even the darkest areas. Fitted with 8.5mm x 1m flexible inspection cable and S..

€165.00

Expert Quality, torque multiplier, designed for the removal and installation of highly torqued wheel nuts on commercial vehicles and trucks. Extremely beneficial when an air impact wrench is not accessible. Kit comes complete with two chrome molybdenum 1” square drive, 32mm, 33mm sockets and an extension bar for deep dished wheels. The gear ratio of the torque multiplier is 1:56 producing a maximum output of 3200Nm. Supplied in a convenient plastic storage case...

€170.77

FEATURES:Power and portability, Motor emits no fumes, Long maintenance free life, Pressure switch, pressure regulator and pressure gauge, Fitted with a pressure switch and air outlet gauge, Quick euro coupling outlet, Supplied complete with a 1.7m approved cableSPECIFICATION:Tank Size 6LMotor 1.2kw (1.5HP)Air displacement 6.5cfm (185L/min)Free air delivered (FAD) 5.1cfm (145L/min)Input current 13ASpeed 4000rpmMaximum pressure 116psi (8bar)Dimensions 320 x 278 x 330mmWeight 7.7kg..

€179.00

This premium-quality kit includes a vast selection of commonly used tools for the workshop, mobile engineer and mechanic. Manufactured from high quality chrome vanadium steel, correctly hardened and tempered. Featuring many hand tools including 1/4" and 1/2" Sq. Drive 72-tooth reversible ratchets with soft grip handles, plain slot and PH type screwdrivers, combination spanners, spinner handle, side cutters, combination pliers, long nose pliers and more. Plus, a wide range of Draper HI-TORQ® and ..

€179.00

This best selling Gasless MIG welder unit is a handy tool for carrying out general repairs. This compact no-gas welder offers excellent performance at an extremely competitive price. The welder is supplied ready to go with a earth clamp, spool of 0.8mm flux cored wire, chipping hammer/brush and face mask. Uses flux cored wire, hence no gas is required to shield the weld pool. Ideal for use outdoors in windy conditions. The welder features include a direct fit safety torch, four stage power..