€27.90

FEATURES:4 - piece pry bar set attached with shock - resistant soft grip handles for added user comfort. Each pry bar is fitted with a striking cap...

€28.21

FEATURES: Supplied with two 1/2" sq. drive reversible sockets size 17 x 19 and 21 x 22mm, manufactured from chrome vanadium steel. Handle extends to 525mm which helps to increase torque on difficult wheel nuts. Display packed. VAT Rated At:20.00%Barcode:5010559191529Inner Box Qty1Outer Box Qty16Weight1.370kgs  View product in our catalogue: Page 164 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the en..

€28.21

Designed for use on compression nuts fitted on petrol, diesel injection pipes and hydraulic gas or refrigeration systems. Manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Display packed.Contents;6 x 8, 9 x 11, 10 x 12, 13 x 14, 14 x 17, 19 x 22mm..

€28.91

This three-piece plier set contains a 160mm side cutter, 180mm combination pliers and 200mm long nose pliers. High leverage is achieved by setting the fulcrum point closer to the jaw and increasing the lever movement by 20%. Each tool is manufactured from hardened and tempered carbon steel, with induction hardened jaws and cutting edges for enhanced performance. The handles are ergonomically designed with soft grip for user comfort.The set contains a 160mm side cutter, 180mm combination pliers a..

€29.00

Expert Quality, forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Polished Draper Expert HI-TORQ® ring end offset at 15°. Jaw offset at 15°.Expert QualityContents: 8-19mmChrome vanadium steel hardened tempered and chrome platedDraper Expert HI-TORQ® ring ends offset at 15°Open ends set at 15°Generally in accordance with DIN3113 SpecificationsDraper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.Contents12 x Spanners: 8, 9, 10, 11, 12,..

€29.14

Ratcheting tie-down strap set made from polyester webbing ideal for securing transport loads etc. The ratcheting mechanism is manufactured from steel that'sapplied with a protective plating and fitted with a plastic cap for added user comfort. Each strap is fitted with dipped metal 'S' hooks and is 4.5m in length whilst being 25mm wide.Weight 1.670kgsCapacity 225kgLength 4.5mWidth 25mm..

€29.24

FEATURES:For bleeding or undertaking a full brake fluid replacement in cars, vans, trucks and motorbikes, this pneumatic brake fluid extractor uses a standard workshop air supply. It requires simple, one-person operation and is quick, clean and efficient. The extractor draws fluid from the bleed nipple without the requirement of specialised brake reservoir caps and has a translucent hose to allow for the monitoring of air in the system. There is a lockable trigger function, and the extractor is ..

€29.65

Twin LED indicators identify voltage between 12 - 600V. Suitable for testing a host of wiring around the home or workplace, vehicle circuitry and electronic equipment etc. Probes fitted to 825mm of VDE approved cable.Twin LED indicatorsIdentify voltage between 12-600VSuitable for testing a host of wiring around the home or workplace, vehicle circuitry and electronic equipment, etcProbes fitted to 825mm of VDE approved cableSpecificationsAmperage AC/DCCable Length 0.6m (1.95ft) (Approx.)Earth Con..

€29.95

This Shade 11 welding safety helmet has a fast fully-automatic darkening reaction on striking the arc to protect the eyes. Suitable for ARC, MIG and TIG welding. The 90 x 34mm viewing area provides good visibility of the weld zone. The helmet provides UV and IR radiation protection at all times, even without power. It is powered by a Li-ion battery and solar panel technology, which works with the battery to provide longer life energy conservation. It has an adjustable headband for an optimal fit..

€29.96

FEATURES: Manufactured and tested generally in accordance with DIN3122 and ISO3315 SpecificationsManufactured from chrome vanadium steel hardened and tempered with a satin finish. Supplied with 72 tooth reversible soft grip ratchet and 100mm extension bar. VAT Rated At:20.00%Barcode:5010559163717Inner Box Qty4Outer Box Qty16Weight0.840kgs  View product in our catalogue: Page 42 View more products in this category CONTENTS:   10 sockets size 10, 11, 12, 13, 14, 15, 16, 17,..

€29.96

FEATURES:Manufactured to EN1494 SpecificationHigh quality, fitted with overload protection. Wide base for improved stability and cross sectioned saddle delivers better grip. Fitted with an adjustable height ram saddle. Supplied with two-piece handle. Tested and certified to the current EN1494 standard.SPECIFICATION:Weight 2.177kgsCapacity 2TRange 148-278mmScrew Extension 50mm..

€29.96

FEATURES:Manufactured from hardened and tempered chrome vanadium steel with shot blasted finish. Spare bits are available. Packed in impact resistant plastic case. Display carton.Draper TX-STAR products are compatible with †Torx fixing systems.CONTENTS:  bit holder 10mm hexagon x 3/8" sq. drive   bit holder 10mm hexagon x 1/2" sq. drive   7 x 30mm and 7 x 75mm Draper TX-STAR® bits: T20, T25, T30, T40, T45, T50 and T55   5 x 30mm and 5 x 75mm spline bits: 5, 6, ..

€30.48

FEATURES:This injector seal removal tool is made from heavy-duty carbon steel. It is fully adjustable and designed for the removal of 6.7–8.7mm internal diameter copper injector seals. Supplied inside a blow-moulded case.CONTENTS:1 x Injector Seal Removal Tool..

€31.93

FEATURES: Suitable for a variety of applications including removing cotter pins, radiator hoses, flaking paint and gaskets. Blades hardened and tempered carbon steel. Display packed. VAT Rated At:20.00%Barcode:5010559351008Inner Box Qty6Outer Box Qty24Weight0.558kgs  View product in our catalogue: Page 141 View more products in this category CONTENTS:   2 Multi-purpose scrapers - 210 and 275mm   Scratch awl - 200mm   Cotter pin puller - 225mm   Radiator hose remover - 175mm..

€32.44

FEATURES:Booster cables fitted with a cable that's insulated with PVC for added durability and attached with heavy - duty handles. Suitable for 6V/12V systems and on petrol engines commonly found in motorbikes, cars and light commercial vehicles. Supplied in a zip bag...

€32.53

FEATURES: Allows removal of vehicle batteries without losing memories or settings for ICE systems, digital clocks, trip computers from the ECU (engine control unit). Uses 16 pin plug with reverse polarity protection. Supplied with 2.7M (approx.) of cable with crocodile clips for attachment to slave battery and in-line fuse. Display packed. VAT Rated At:20.00%Barcode:5010559222315Outer Box Qty48Weight0.218kgs  View product in our catalogue: Page 131 View more products in this cat..

€32.65

FEATURES:This puller for ribbed drive pulleys is made from heavy-duty carbon steel. Designed for use on crankshafts, alternators, air conditioning units and water pumps. The precision grooves grip the pulley without damage. With low profile arms for use in restricted space and locking bolts to prevent slipping under tension.SPECIFICATION:Range 35-165mmCONTENTS:1 x Puller for Ribbed Drive Pulley, 35–165mm..

€32.99

FEATURES: 1/4", 3/8" and 1/2" square drive socket carrier made from pressed steel plate with fold down carrying handle. 430mm long socket retaining bars manufactured from carbon steel hardened and tempered with a polished finish. Display carton. VAT Rated At:20.00%Barcode:5010559297603Inner Box Qty10Outer Box Qty20Weight0.809kgsSize430 x 150mm  View product in our catalogue: Page 58 View more products in this category CONTENTS: 1 bar for 20 x 1/4" square drive sockets 1 bar..

€33.03

FEATURES:This portable 2A smart charger does more than just charge 12V vehicle batteries. The charger can be connected to a battery for a long duration and it will monitor the power and slow it down to prevent any overcharge. An LED light will flash at each stage of charging: 25%, 50%, 75%, and 100%. It is also suitable for winter charging in temperatures as low as -20°C. It is an easy to use and cost-effective solution to keep batteries in good condition all year round.SPECIFICATION:Charge Type..

€33.05

FEATURES:Manufactured to EN1494 Specification1.5 Tonne mechanical scissor jack, with a compact design for easy storage. Integrated rubber saddle prevents damage to the underside of vehicles. Supplied with a winding handle.Capacity:         1.5TRange:             230-390mmSPECIFICATION:Capacity:                1.5 Tonne (1500kg)L..

€33.05

FEATURES:This auto probe carries out tests on DC automotive electrical circuits from 6V up to 24V quickly and efficiently. It is ideal for detecting short circuits and locating bad earths. It is also great for continuity tests and powering up components prior to fitting. The probe has an easy-to-read LED display, which illuminates green for positive voltage and red for negative. It has a long 3.45m cable to enable testing to be carried out right around the vehicle. Supplied with 2 x crocodile cl..

€34.20

FEATURES: Expert Quality, polished solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection. Carbon fibre shaft fitted with comfortable shock-absorbing double injection PP/TPR grip for anti-vibration protection. Sold Loose VAT Rated At:20.00%Barcode:5010559263318Inner Box Qty4Outer Box Qty16Weight1.180kgsWeight900g (32oz)  View product in our catalogue: Page 358 View more products in this category BRAND I..

€34.20

High quality closed-cell EVA foam fully oil and water-resistant.Size 980 x 380mm..

€34.95

FEATURES: Expert Quality, set of three 6 point Draper Expert HI-TORQ® sockets sizes 17, 19 and 21mm. Manufactured from chrome molybdenum. Fitted with internal and external nylon sleeve preventing damage to wheels and nuts when in use. Supplied in handy case.Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd. VAT Rated At:20.00%Barcode:5010559306305Outer Box Qty10Weight0.818kgs  View product in our catalogue: Page 70 View more products in this category BR..

€35.65

FEATURES: Draper TX-STAR® products are compatible with †Torx fixing systemsExpert Quality, manufactured from chrome vanadium steel, hardened and tempered with a polished finish. Supplied on a socket retaining bar. VAT Rated At:20.00%Barcode:5010559344154Inner Box Qty10Outer Box Qty40Weight0.555kgs  View product in our catalogue: Page 87 View more products in this category CONTENTS:   1/4" sq. drive: E4, E5, E6, E7 and E8   3/8" sq. drive: E10, E11, E12 and E14   1/2" sq. ..

€35.85

FEATURES: PVC air line hoses for the workshop and industrial user, Supplied with zinc plated fittings. Display packed.Manufactured to BS EN ISO 5774 Specifications VAT Rated At:20.00%Barcode:5010559383313Outer Box Qty1Weight2.170kgsConnection1/4" BSP MaleInternal x External Dia.8 x 16mmLength10MSize8mm  View product in our catalogue: Page 656 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusi..

€36.27

FEATURES:Designed to control output air pressure, eliminate moisture and contaminants from airflow and to lubricate tools during use. The main body of this unit is aluminium with polished silver finish. The gauge has steel casing and is duel-marked with psi and Mpa. Steel screw-on transparent bowl. Manual/semi-automatic drain, fitted with 40-micron filter. Complete with wall bracket.SPECIFICATION:Inlet/outlet thread: 1/4" BSPMax. inlet pressure: 145psiWorking temperature range: 5-60℃Filtrat..

€36.68

FEATURES:Hardened and tempered coil spring compressors. The 'Wrap-Over' claw design delivers an increased safety jaw capacity of 95-235mm, Hex size 21mm with a Hex drive of 1/2" and an M16 threaded bar that's applied with a chemically blacked finish.VAT Rated At: 20.00%Barcode: 5010559852147Outer Box Qty 10Weight 1.608kgs..

€36.99

FEATURES:Exhaust pipe cutter pliers designed to cut single-wall pipes up to 83mm diameter. There are 15 steel cutting discs, and it takes just a 900 turn to make a complete cut, making this an ideal tool for working in confined spaces. Cutting oil is needed for effective use. Not to be used on stainless steel exhaust pipes.SPECIFICATION:Length                         230mmChain..

€37.18

FEATURES:Expert Quality, insert bits manufactured from S2 silicon steel, hardened and tempered with shot blasted finish. Bit holders made from chrome vanadium steel hardened, tempered and chrome plated. Spare bits are available. Packed in steel case and display carton.CONTENTS:   bit holder 10mm hexagon x 3/8" sq. drive   bit holder 10mm hexagon x 1/2" sq. drive   7 Draper TX-STAR® bits: T20, T25, T30, T40, T45, T50 and T55 x 30mm long   7 Draper TX-STAR® ..