Draper 230V Bandsaw, 228mm, 300W (98446)

Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45° range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.

• Adjustable blade tensioning and tracking for precise cutting
• Mitre guide for crosscut work. Graduated to 30 degrees for both left and right hand angles
• Table tilting with 0-45 degree range
• Fitted with a no-volt on/off switch and 53mm dust extraction outlet
• Supplied with 10tpi blade, parallel rip fence and other accessories

Specifications

• Voltage 230V
• Frequency 50Hz
• Input 300W
• No load speed 1400rpm
• Maximum throat capacity 228mm
• Cutting depth 90mm
• Maximum capacity 125mm
• Cutting speed 10.6m/sec (635m/min)
• Table size 300 x 300mm (Tilt to 45°)
• Bandsaw dimensions 510 x 370 x 755mm
• Weight 19kg

Contents

• 1 x 10tpi blade
• 1 x Parallel rip fence
• 1 x Open ended spanner
• 1 x Push stick
• 1 x Hex key