€1.48

suitable for BGS 2072 Gross weight 1 g Packaging suitable for wall hanging Yes..

€2.66

cable length approx. 630 mmprobe length approx. 125 mmsuitable for multimeters with 4 mm test socketslight type Gross weight 36 g Packaging suitable for wall hanging Yes..

€4.13

120 - 250 Vwith lens and metal clip Gross weight 42 g Packaging suitable for wall hanging Yes..

€5.61

to locate short circuits and interruptionstest tip protected with a screwable capwith crocodile clampstainless steel probebrass housing and cap Gross weight 46 g Length 125 mm Voltage range 6 - 24 V Packaging suitable for wall hanging Yes..

€9.45

double insulated tipmultiple applications Gross weight 98 g Measuring range DC 6 - 24 V Packaging suitable for wall hanging Yes..

€14.46

allows piercing of insulated cords Gross weight 91 g Packaging suitable for wall hanging Yes..

€15.99

spare part is marked in Figure 1 Gross weight 32 g..

€15.99

double insulated tipmultiple applicationsDC: 6 - 12 - 24 - 110 - 220 - 380 VAC: 110 - 220 - 370 V Gross weight 104 g Measuring range AC 110 - 370 V Measuring range DC 6 - 380 V Packaging suitable for wall hanging Yes..

€19.96

7-segment display, 12.5 mm, 3.5 numberssuitable for measurements in CAT II ranges such as household appliances with connectors, car electronics, etc.has the most common measuring ranges:DC voltage: 200 mV, 2000 mV, 20 V, 200 V, 600 VAC voltage: 200 V, 600 Vdirect current: 200 µA, 2000 µA, 20 mA, 200 mA, 10 Aresistance: 200 ohm, 2000 ohm, 20 kiloohm, 200 kiloohm, 2000 kiloohmdiode testtransistor test (hfe) via adaptorbattery info display shows if battery should be replacedoperating temperature: 1..

€22.02

suitable for measurements in CAT II area3 1/2 digit, 7 segments, 12.5 mm LCDindication for overflow, polarity and low battery voltagemeasuring ranges for resistance, AC voltage, DC voltage, diode voltage drop and hFE transistor measurementsoperating temperature: 10°C ~ 40°C, 0 ~ 75% relative humiditypower supply: 2x 1.5 V AAA batteryweight: 140 g (incl. battery)DC voltage measuring ranges:200 mV, resolution: 10 µV, accuracy: ±0.5% +10 digit2000 mV, resolution: 1 mV, accuracy: ±1% +5 digit20 V, r..

€30.50

12 - 400 V AC voltage12 - 500 V DC voltage2-poles5-way LED polarity light12 Volt / 50 Volt / 120 - 150 Volt / 220 - 230 Volt / 400 - 500 Volt Gross weight 195 g Packaging suitable for wall hanging Yes..

€33.21

LCD display, 3 1/2-digit (up to 1999 count)reading rate: 3 reading/secpolarity indicationoverload indicationdimensions: (L x W x H) 193 x 73 x 25 mmweight: 145 g (incl. battery)power requirements: 2 x 1.5V (AAA)incl. storage bag, 2 measuring cables and 2 batteriesmeasuring ranges:DC voltage: 200 V / resolution: 100 mV, 600 V / resolution: 1 VAC voltage: 200 V / resolution: 100 mV, 600 V / resolution: 1 VAC current: 2000 mA / resolution 1 mA, 20 A / resolution 10 mA, 600 A / resolution 1 Aresista..

€36.41

suitable for measuring in extra low voltage rangeboth sides with 4 mm plugs (stackable)includes the following tools:2 measuring cables (red)2 measuring cables (black) Gross weight 160 g Length 1000 mm..

€36.65

3.5-digit LCDlow battery indicationoverload protectionmanual range selectionsafety sockets and plugsmeasuring ranges:DC voltage: 200 mV, 2000 mV, 20 V, 200 V, 250 VAC voltage: 200 V, 250 VDC current: 200 µA, 2000 µA, 20 mA, 200 mA, 10 Aresistance: 200 Ohm, 2000 Ohm, 20 kOhm, 200 kOhm, 2000 kOhmaudible continuity sounds under 50 Ohmdiode test with forward voltage reading Gross weight 236 g Packaging suitable for wall hanging Yes..

€38.38

aligator clips, red and blackfor use with multimeters, testing lights etc.length: 15 m Gross weight 506 g Length 15 m..

€45.97

shock resistant plastic protectionwith put-up hingeenergy-saving LCD displaydata hold buttompower supply: 9V block batterysuitable for measurements in CAT II areameasuring ranges:DC voltage: 200 mV - 2 V - 20 V - 200 V - 600 VAC voltage: 200 V - 600 Vresistance: 200 Ohm - 2-component Ohm - 20 KOhm - 200 KOhm - 2 MOhmDC current: 20 µA - 200 µA - 2 mA - 20 mA - 200 mA - 10 Adiode forward voltage Gross weight 439 g Packaging suitable for wall hanging Yes..

€52.77

allows measurements on insulated cablespierces cables isolations without major damage4 mm measuring cable jackincludes two measuring grippers: 1 red and 1 black Gross weight 76 g..

€55.35

current measurements directly at the fuse box of cars and truckshelps to e. g. find "hidden" currentsapplication: to measure, remove the original fuse and connect the tester plugprotection of the circuit is still provided by a fuse in the testerplugs both for mini fuse and standard fuse socketssuitable for 12 V and 24 V systemsmax. current: 20 A Gross weight 102 g Packaging suitable for wall hanging Yes..

€83.64

for checking of 12 V petrol injectors4 pulse modes for locating stuck, leaking or burnt-out injectorsmode 1: admits 1 pulse after triggering, pulse width about 250 msmode 2: admits 50 pulses after triggering, pulse width about 7 msmode 3: admits 100 pulses after triggering, pulse width about 3.5 msmode 4: admits pulses continously at the rate of 50 pulses per 1450 ms, every pulse's puls width about 7 mspower supply: 12V vehicle batteryoperation enviroment: 0 - 40 °C, relative humidity < 80%stora..

€102.14

LCD display for AC and DC voltage from 24 V to 690 VLED display in following 5 voltage steps: 24 V, 50 V, 120 V, 230 V, 400 V and 690 Vphase rotation indicator: frequency 50 - 60 Hz / voltage 0 V - 690 Vcontinuity tester with acoustic and optical displaysingle-pole voltage testpolarity detection positive / negative (LED display)protection class: IP65battery test, indicates when the internal battery is weakpower supply: 2x 1.5 V (R03)net weight 210 g Width 51 mm ..

€107.26

reduces the cost for glow plug testingremoving of the glow plugs for testing is not necessarytest results are shown on LED displaysuitable for testing of 12 V glow plugseasy to use Gross weight 396 g..

€115.72

designed especially for the automotive sector, but can also be used in other areas3 - 3/4 digits LCD max. display value 3999battery: 2x 1.5 V AAA or similarlow battery indicatorstorage condition: from -10 °C to +50 °C, max. 85% RHdimensions: 194 x 71 x 38 mmweight: about 215 g (including batteries)suitable for category CAT IImeasuring ranges:AC and DC voltage measuring ranges: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 Vresistance: 400 Ohm, 4 KOhm, 40 KOhm, 400 KOhm, 4 MOhm, 40 MOhmAC and DC curre..

€120.29

ideal for the diagnosis of electrical circuits on carsthis meter is fast, accurate and safe to useis used to measure currents (directly to the fuse socket) and voltagecurrent measurement: up to 30 A at 48 VDC (max. 10 sec.), accuracy: ±1%voltage measurement: 1 - 48 VDC, accuracy: ±1%working temperature: 0°C to 50°Cstorage temperature: -20°C to 60°Chumidity: less than 70% RH (working)less than 80% RH (storage)max. height: 2000 mpower supply: 1x 9V batteryscope of delivery:1 voltage and current me..

€184.01

especially useful and handy multimeter with single-handed controlfor testing electric 12 - 24 volt systems on cars, trucks and motorcyclesbright LED guarantees a well lit work spaceeasier troubleshooting by connecting from a positive or negative potential, max. current 10 ampereautomatically resetting fusepotential is indicated by 2 alternatively colored LEDs – comes in handy when testing ignition,injection and other pulsed voltage systemsilluminated displaybuilt-in continuity tester with optica..

€252.89

for professional adaptation of testing equipment such as multimeters, oscilloscopes, simulators, etc. to the vehicle electricityfacilitates testing works on electrical units by a perfect electrical connectionsuitable for the most vehicles from Europe, America and Japanscope of delivery:2 potentiometers (5 KOhm), to simulate temperature and throttle position sensors2 LED test adaptors, for testing voltage and ground signals, example: hall sensors, injectors, solenoid valves, etc.2 SRS airbag simu..

€334.48

suitable for all multimeters with 4 mm test socketfor checking all types of electric circuitsperfect for checking of car electricityscope of delivery:72 testing leads (=36 male and 36 female terminals)2 pcs 5 KOhm potentiometers (variable resister)2 LED stroboscopes2 SRS connectors2 alligator clips2 standard probes2 acicluar probes2 connectors "1 female to 2 male"4 connectors "1 female to 1 male" Gross weight 3221 g..