€16.24

Gross weight 180 g..

€17.56

for easy assembly/disassembly of O-rings and seals in engine, transmission, steering and hydraulic systemsalso suitable for work on the interior bodyworkenables higher precision during difficult assembly and disassembly operations3-piece set with 6 tipsmaterial: nylon fiberscope of delivery:1 O-ring disassembly and assembly tool, with bent and 45° angled tip, length 168.5 mm1 O-ring disassembly and assembly tool, with straight and 90° angled tip, length 163.5 mm1 O-ring disassembly and assembly ..

€22.14

suitable for driving out the clamping screws with Ø 6.2 mm as on four-wishbone front axlesto be used with air hammer kit BGS 3515remover 6 mm, length 105 mmround shank 10 mm  Gross weight 102 g Length 190 mm..

€27.06

for adjusting running gear (camber / caster)suitable for VW Touareg as of 200321 mm 12-pointto be used as OEM T10188satin chrome finish Gross weight 330 g Material Chrome Molybdenum Steel To be used as OEM1 T10188 Volkswagen..

€29.27

suitable for driving out the clamping screws on four-wishbone front axles on, installed in the Audi A4, A6 and VW Passatto be used with air hammer kit BGS 3515round shank 10 mmscope of delivery:1 release mandrel chisel1 extractor, short1 guide sleeve  Gross weight 204 g..

€32.72

for assembling, disassembling and adjustment of the lateral rack and pinion clamping nutsuitable for the following vehicle models with EPS:BMW 1 series F20/F21 (2011-2020), F22/F33 Cabrio (2014-2020)BMW 3 series F30 (2012-2016)BMW 3 series Touring F31 (2012-2019)BMW 4 series F32/F33/F36 (2013-2020)BMW X1 F48/F49 (2015-2020)BMW X3 F25 (2010-2017)BMW X4 F26 (2014-2018)Mercedes-Benz C-class W205 (2014-2019)Mercedes-Benz S-class W222, V222, X222 (2014-2019) Drive profile Ext..

€45.51

for loosening and tightening tie rodsthe tool is attached to the axial joint and fixes itself when loosening or tightening via eccentrically mounted toothed rollerssmall dimensions for tight spacessuitable for axial joint diameter 33-42 mm Drive profile Internal square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 564 g..

€46.49

similar to BGS 1523 Gross weight 40 g..

€58.06

helps to determine the suspension strut angle before disassembly and the adjustment of the same angle after reassemblysimply attach to the brake disc with integrated magnetsadjustable water level included Gross weight 510 g..

€59.53

suitable for BGS 66530 Gross weight 967 g Material Chrome Molybdenum Steel..

€60.52

suitable for Opel models from 2007 Gross weight 612 g Hook foot thickness at the top 5,5 mm Hooked footh 3,5 mm Hook length 12 mm Material Chrome Vanadium Steel Hex drive size 17 mm Clamping depth 80 mm Clamping width 35 mm Spindle length 95 mm Packaging suitable for wall hanging Yes..

€61.35

for replacing tie rodssuitable for inner tie rod end diameters from 27 to 42 mmfor loosening and tighteningallows high torque transmissionmaterial drive: steel (C45)surface finish: phosphatematerial drive: chrome molybdenum steel Drive profile Internal square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 638 g Material Chrome Molybdenum Steel Surface fin..

€77.74

for fast and professional changing of the axial joints of cars and light commercial vehiclesautomatic clamping of the joint headseasy assembly of long tie rods because of open constructionsaves up to 3 hours of working timefor tie rod ends with diameter: 28 - 35 mmworks with 12.5 mm (1/2") ratchet or 27 mm wrench sizelength 400 mm Gross weight 1930 g Material Chrome Molybdenum Steel..

€81.67

for fast and professional changing of the axial joints of cars and light commercial vehiclesautomatic clamping of the joint headseasy assembly of long tie rods because of open constructionsaves up to 3 hours of working timefor tie rod ends with diameter: 35 - 45 mmworks with 12.5 mm (1/2") ratchet or 27 mm wrench size Gross weight 2258 g Length 400 mm Material Chrome Molybdenum Steel..

€84.87

for renewing round and hexagon tie rodssuitable for many European, Asian and American vans, SUVs and larger carstoothed clamping element prevents slippingalso suitable for stuck tie rods Gross weight 712 g Packaging suitable for wall hanging Yes..

€85.85

for quick and accurate alignment of the steering wheeloptimal use in the assembly of steering wheelscan be used universally for cars, vans and trucksincreased adjustment range for smaller steering wheel diameteradjustable from 255 to 370 mm Gross weight 240 g Material Aluminium Packaging suitable for wall hanging Yes..

€92.30

allows one-person adjustingreduces the required timeclamping width: 135 - 175 mm22 mm hexagon spindle3 spindle lengths for a wide range of applications75 mm for e. g. Seat Toledo VW Jetta, Golf85 mm for e. g. Seat Cordoba VW Polo from 1995115 mm for e.g. Chrysler Voyager Gross weight 3310 g..

€115.13

helps to determine the suspension strut angle before disassembly and the adjustment of the same angle after reassemblydouble adjustability: 1st step ruff adjustment via 180° clapping mechanism - 2nd step fine adjustment via adjustment screw Gross weight 542 g..

€132.25

for pulling off the drop arm from steering box on Land Rover Defenderalso suitable for drop arms which are difficult to remove due to corrosionprotects steering box and shaft seal drive: external hexagon 24 mm Drive profile External hexagon Drive profile size, metric 24 mm Gross weight 1752 g..

€146.12

is needed to pull the steering shaft sleevewhen replacing the turn signal / wiper switch unitsuitable for VW Golf II / III / IV, Jetta, Passat, Polo and Vento since '88external hexagon 17.0 mm Gross weight 756 g..

€177.02

changing of the tie rod ends is possible without additional alignmentreduces the workload when changing tie rodsscope of delivery:main unit with clamping device10 and 12 mm calliper, short and long type17 mm caliper for VWfixing unitcaliper for depth measuring Gross weight 3146 g..

€180.07

for rusted track rodsfacilitates the track settingspecial mouth mechanism holds track rods from 14 up to 20 mmdetachable, knurled handle Gross weight 1142 g Length 390 mm Surface finish Galvanised, electroplated..

€186.57

for fast and professional changing of the axial joints of cars and light commercial vehicleseasy assembly of long tie rods because of open constructionfor joint heads Ø 30 - 45 mm3 exchangeable clamping heads for a wide application area (30 - 35, 35 - 40, 40 - 45 mm)works with 12.5 mm (1/2") ratchet or 32 mm wrench Gross weight 5968 g Length (incl. clampinghead) 415 mm Material Chrome Molybdenum Steel..

€2,106.06

allows easy mounting of rubber bearings and bushingssuitable for most cars, SUV, Pick Ups, etc.scope of delivery:10t hydraulic cylinder2 pressure pieces, length: 28 mm and 95 mm4 pulling spindles, M10x1.5 - M12x1.75 - M14x2.0 - M16x2.022 assembly bushes, length 40 mm22 assembly bushes, length 110 mm, bush dimensions (external Ø x internal Ø): 26x18, 28x20, 30x22, 32x24, 34x26, 36x28, 38x30, 40x32, 42x34, 44x36, 46x38, 48x40, 50x42, 52x44, 54x46, 56x48, 58x50, 60x52, 62x54, 64x56, 66x58 und 68x60..