€9.05

for the professional and non-destructive release of quick couplings on the intake manifoldprevents damage to the suction pipes or connectionsallows easy and quick disconnectionsuitable for e. g. the following models:VW Golf (2013-), Audi A3 (2013-), Seat Leon (2013-), Skoda Octavia (2013-) with 4 cyl. injection engine 1.2l / 1.4l direct injection, turbochargerto use used as OEM T10527 Gross weight 114 g Packaging suitable for wall hanging Yes ..

€27.45

for installing and adjusting dual clutches on VAG DSG 6-speed direct shift gearboxsuitable for gearboxes with code 02Eto be used as OEM T10303 Gross weight 122 g To be used as OEM1 T10303 Audi To be used as OEM2 T10303 Seat To be used as OEM3 T10303 Skoda To be used as OEM4 T10303 Volkswagen..

€29.13

is required when adjusting the engagement bearing position for clutch "K1" and "K2suitable for 7-speed dual clutch transmissions (DSG) from VAGinstalled in the following vehicle models:VW Tiguan (2008-)VW Transporter (2010-)Seat Alhambra (2011-)to be used as OEM T10524 Gross weight 110 g To be used as OEM1 T10524 Seat To be used as OEM2 T10524 Volkswagen..

€43.20

scope of delivery:8 conical centering bushes for clutch discs with hole sizes: 14.5 - 25.5 mm8 adaptors for centering in the crankshaft: 10.8 - 12.2 - 13.5 - 14.7 - 15.8 - 17.1 - 18.3 - 19.9 mmcentering shaft 145 mm Gross weight 1330 g..

€45.07

for centering and holding the clutch disc when mounting the clutch pressure platesuitable for following engines and vehicle models:TDV6 engine (2.7) installed in:Ford TerritoryLand Rover Discovery 3 (2004-2010)Range Rover Sport (2005-2009)Citroën C5 / C6Jaguar S-Type / XF / XJPeugeot 407 / 607TD4 Duratorq engine (2.4) installed in:Land Rover Defender (06-13)Ford Transit (2002-2006)LDV Convoy (2002)London Taxi TXIIto be used as OEM 308-419, 303-1096 Gross weight 850 g ..

€48.31

for quick and easy release of the clutch master piston rod from the clutch pedalvery useful tool when removing the clutch master cylinder, clutch pedal, pedal support bracket, etc.to be used as OEM GM DT 6202-B, VAG T10005, PSA G-0350-Csuitable for following modells:Audi A1 (8X), A3 (8P), A4 (B7), A6 (C6)Citroen C4, Partner, PicassoOpel Astra-J, Signum, Vectra C, Adam, Cascada, ZafiraPeugeot 108, 206+, 207, 208, 301, 307, 308, 405, 508, 807, 2008, 3008, 5008, BoxerSeat Alhambra, Altea, Altea Fre..

€49.59

required when installing a new clutch in the 5-speed transmissionfor alignment of the clutchsuitable for the following vehicle models:MINI One (2001-2006)MINI Cooper (2001-2006)MINI Convertible (2005-2008)suitable for engine code letters W10, B14A and B16A with 5 gearto be used as OEM 216100 (83 30 0 493 999) Gross weight 604 g To be used as OEM1 216100 | 83300493999 BMW To be used as OEM2 216100 | 83300493999 MINI..

€64.55

for turning the crankshaft and locking the flywheel when loosening and tightening the pulley bolt and flywheel.suitable for the following engines:1.2 petrol, engine code: B38A12A1.5 Diesel, engine code: B37C15A, B37D15A1.5 petrol, engine code: B38A15A, B38B15A, B38K15A2.0 Diesel, engine code: B47D20A, B47D20B, B47C20A, B47C20B3.0 petrol, engine code: B58B30Abuilt-in following vehicles:BMW 116i (15-19), 116d (15-19), 118d (15-19), 120d (15-19), 125d (15-19), M140i (16-19)BMW 214d (15-19), 216i (1..

€78.33

suitable for the following work:extracting the clutch release shaft on Fiat Ducato (1994) with pulling clutchextracting the chain guide rail bolt on BMW and Mercedes enginesscope of delivery:includes puller body with M8 x 1.25 internal spindle threadpull clamp for clutch release shaftM6 x 1.0 (M8 x 1.25) bolts for removing the guide rail bolt Gross weight 1290 g..

€78.52

for aligning the clutchrequired when installing a new clutch in a 6-speed manual transmissionssuitable for following vehicle models:MINI CooperMINI Cooper Sto be used as OEM 21 2 210 (83300494261) Gross weight 1282 g To be used as OEM1 212260 MINI..

€78.52

to remove the gear wheel from the fifth gearis needed when replacing the gear wheel and disassembling the transmissionsuitable for the following vehicle models with front-wheel drive:Ford Fiesta all models with transmission IB5 or B5Ford Focus Mk1, Mk2, Mk3 with transmission MTX75Ford KA all modelsFord Mondeo all models with 5-speed transmissionFord C-Max all models with 5-speed transmissionFord Galaxy all models with 5-speed transmissionFord EcoSport all models with 5-speed transmissionFord Fus..

€81.67

universal use for vehicles with a hub diameter of Ø 15.0 mm - 26.6 mmfor mounting single-disc dry clutchescentering the clutch disc over the guide bearing is not necessaryin 2 sizes: 15 - 19 mm and 20 - 26.6 mm Gross weight 812 g..

€95.45

for installing of brake band piston B1suitable for automatic transmission: 720.1 / 722.0 / 722.1 / 722.3 / 722.4 / 722.5to be used as OEM 201589035900 Gross weight 1368 g..

€95.45

for centering of the clutch discScope of Delivery:8 centering bushes (crankshaft bore / pilot bearing)diameters: 12.1 - 14.2 - 15.1 - 16.1 - 17.1 - 18.0 - 19.0 - 20.1 mm3 clutch disc centering pinsdiameters: 14.9 - 19.7 mm ; 19.8 - 27.2 mm ; 22.8 - 36.0 mm Gross weight 1888 g..

€95.45

for centering the clutch disc while installing an already pretensioned self adjusting clutch (SAC)suitable for BMW clutchesscope of delivery:clutch centering mandrel, outer diameter 15 x 23.0 mm, incl. bolt M8 x 1.25 x length 65 mmclutch centering mandrel, outer diameter 15 x 26.5 mm, incl. bolt M8 x 1.25 x length 65 mmclutch centering mandrel, outer diameter 15 x 28.0 mm, incl. bolt M8 x 1.25 x length 65 mmclutch centering mandrel, outer diameter 15 x 32.5 mm, incl. bolt M8 x 1.25 x length 65 m..

€98.30

for clutch discs with 15 to 28 mm clutch hub diameterallows an accurate centering of the clutch disc on vehicles with or without pilot bearingalignment according to friction surface of the clutch pressure platesuitable for most vehiclescentering sleeve Ø: 12, 14, 15, 16, 17, 18 & 19 mm Gross weight 760 g..

€112.18

for adjusting the clutch K1 & K2 on VAG DSG transmission as of 06.2011supplementary tool for VAG DSG transmission duplex clutch repair kit (BGS 8320) Gross weight 4038 g To be used as OEM1 T10466 Audi To be used as OEM2 T10466 Seat To be used as OEM3 T10466 Skoda To be used as OEM4 T10466 Volkswagen..

€113.16

for locking flywheels of manual geaboxes when loosening and tightening, clutch discs on automatic gearboxes etc.suitable for engines in e.g. Honda, Ford, Mitsubishi Toyota, etc. Gross weight 390 g..

€140.91

for removing and installing dual clutchessuitable for Getrag 6-speed dual clutch transmission with code 6DCT450 / MPS6suitable for following modells:Volvo C30, C70 (2006), C40 (2004), S60 (2011), S80 (2007), S80L, V40 (2013), V40 Cross Country, V50, V60, V70 (2008), XC60Ford Focus (2004), C-Max, S-Max, Galaxy, Mondeo (2007), KugaChrysler SebringDodge Avenger, Journeyto be used as OEM Volvo 9997435 / Ford 308-763 Gross weight 1360 g To be used as OEM1 30..

€155.08

required for the professional assembly and disassembly of SAC clutchessuitable for following modells:E34, E36, E38, E39, E46, E52, E53, E60, E61, E81, E83, E85, E86, E87, E88, E90 and E91can be used in conjunction with BGS 8284easy handling, saves time and troublestop screw and adjusting lever, knurledto be used as OEM 212180 Gross weight 604 g To be used as OEM1 21 2 180 BMW..

€157.28

required for repair of the clutch unitsuitable for following modells:VW Golf (2004), Golf Plus (2005) with 7 speed gearbox (Code 0AM)Audi A3 (2004) with 7 speed gearbox (Code 0AM)scope of delivery:support bridge to be used as OEM T10323puller to be used as OEM T10373gannge block to be used as OEM T10374pressure piece to be used as OEM T10376 Gross weight 5730 g To be used as OEM1 T10323 | T10373 | T10374 | T10376 Audi To be used as OEM2 ..

€167.52

required for the tension-free assembly and disassembly of SAC clutchesprevents plate distortion can happen without using a special toolsuitable for series: E34, E36, E38, E39, E46, E52, E53, E60, E61, E81, E83, E85, E86, E87, E88, E90 and E91the resetting of the adjusting ring is possible in conjunction with BGS 8283easy handling, saves time and troubleknurled locking screw and adjusting leverball bearing mounted pressure piece, to be used as OEM 212170 Gross weight 2318..

€177.12

universal application for vehicles with a hub diameter of Ø 15 - 26 mmfor mounting single and double disc dry clutchesfor centering of clutch discs on cars with and without pilot bearingssuitable for cars, SUV and small trucks with front, rear and 4-wheel drivescope of delivery:1 spindle guide: 55 mm long, M15 x 1.5, mandrel range: 15 mm to 19 mm1 spindle guide: 100 mm long, M15 x 1.5, mandrel range: 19 mm to 26 mm1 spindle guide: 150 mm long, M15 x 1.5, thread for small and large cone adaptor1 ..

€251.12

suitable for testing of freeplay angle and the clearance on dual mass flywheels (DMF), a checking of the flywheel is recommend because a worn or defective DMF can damage the new clutchtest can be performed directly on the vehicles if the clutch has been removedscope of delivery:2 different claws for locking the flywheelrotary angle disc with holderdial indicator with holderassembly / measuring bolttwist lever Gross weight 3070 g..

€297.56

for fast and professional disassembly and assembly of SAC clutchesfits on nearly all SAC clutches with 3- and 4-hole pitch from the following models: VAG, MB, Opel, Volvo, Renault etc.as e.g. on models:Audi A3, A4, A6, A8VW Passat, Golf, Sharan, TiguanFord Mondeo, S-Max, Galaxy, TransitMercedes-Benz C, E, CLS, S, CLK, SLK, SLBMW 320, 330, 520, 530Alfa Romeo 147, 159, 166Fiat Ulysse, Croma, DucatoLancia Phedra, Thesisscope of delivery:7 coupling aligning mandrels, 12, 14, 15, 16, 17, 18, 19 mm1 p..

€313.31

for resetting clutch 1 and 2 on Ford Powershift DPS6 transmissionsinstalled in the following european vehicle models:Ford B-Max (2012-)Ford Ecosport (2012-)Ford Fiesta (2008-), Fiesta (2012-)Ford Focus (2010-), Focus (2014-)Ford Transit / Tourneo Connect (2013-)installed in the following US market vehicle models:Ford Fiesta (USA) (2011-2019)Ford Focus (USA) (2012-2018)Ford Focus RS (USA) (2016-2018)Ford Transit Connect (USA) (2019-)to be used as OEM 307-676 Gross weight ..

€344.79

for disassambling, assembling and adjusting the double clutchsuitable for the following VAG models:AudiA3 (2004-) 7 speed (code 0AM)VolkswagenGolf (2004-) 7 speed (code 0AM)Golf Plus (2005-) 7 speed (code 0AM)Touareg (2003-) 6 speed (code 08D)Touareg (2016-) 7 speed (code 0CW)Audi / Volkswagen 7 speed (2011-)scope of delieveryassembly lever, to be used as OEM T10407support bridge with force screw, to be used as OEM T10323thrust piece, to be used as OEM T10376puller, to be used as OEM T10373strai..