€11.61

for loosening tightly fitted ball jointsturning of ball joint with this tool facilitates dismountingsuitable for Audi A4, A5, A6, A7, Q527 mm hexagon with guide bore12.5 mm (1/2") drive Gross weight 130 g Packaging suitable for wall hanging Yes..

€12.40

manufactured from hardened carbon steelfor a quick and secure separation of tie rod ends pitman arms etc. Gross weight 622 g Fork opening 23 mm Length 295 mm Material Carbon Steel Surface finish Galvanized Packaging suitable for wall hanging Yes..

€13.38

from BGS 1795 Gross weight 132 g..

€16.73

manufactured from hardened carbon steelfor a quick and secure separation of tie rod ends pitman arms etc. Gross weight 480 g Fork opening 18 mm Length 185 mm Material Carbon Steel Surface finish Galvanized Packaging suitable for wall hanging Yes..

€17.32

manufactured from hardened carbon steelfor a quick and secure separation of tie rod ends pitman arms etc. Gross weight 988 g Fork opening 18 mm Length 410 mm Material Carbon Steel Surface finish Galvanized Packaging suitable for wall hanging Yes..

€17.52

forged Gross weight 432 g Surface finish Galvanized Packaging suitable for wall hanging Yes..

€28.54

for Mercedes Benz M-class W163 until June 2005 and W164 as of 2005for professional changing of the front and rear axle suspension ball jointsfacilitates loosening and tightening counternuts of the suspension joints with correct torquesuitable for the lower suspension joints on front - and rear axle3/4" drive Gross weight 506 g..

€30.90

universally applicablefor all vehicle types for removing bearings for separating the ball plug when removing the ball joints Gross weight 722 g Fork opening 20 mm Max. clamping width 50 mm..

€32.47

pulling width: 22 mmpulling height: 47 mmoverall width: 70 mmspindle M16 x 1.5 / hexagon 17 mm / length: 78 mm Gross weight 540 g..

€33.36

suitable for many vehiclesforged Gross weight 954 g Fork opening 19 mm Max. clamping width 50 mm..

€34.44

suitable for suspension ball joints on front and rear axles on Mercedes-Benz M-Class W163 and W164especially short type Gross weight 300 g Material Chrome Molybdenum Steel..

€38.38

this extension tool allows a disassembly and assembly of the ball joints, suitable for Mercedes Benz W211 (E-class) / W220 (S-class) / W230 (SL-class) seriesto be used as OEM 2113230068material: S45C steelto be used with BGS 8293 Gross weight 876 g Material Chrome Molybdenum Steel To be used as OEM1 2113230068 Mercedes-Benz..

€39.16

Gross weight 2500 g..

€42.31

for shifting/pushing the ball joint out of axle legs, drop arms, stabiliserespecially for working in narrow spacesuitable only for working on closed joints or joints with centre hole with fine thread spindle23 mm width, 55 mm height, for most models especially for MB W210 Gross weight 887 g..

€44.28

for shifting/pushing the ball joint out of axle legs, drop arms, stabilisersespecially for working in narrow spacesuitable only for working on closed joints or joints with centre holewith fine thread spindlewidth: 28 mm, usable height: 55 mmespecially for Audi A4, A6, A8, VW Passat etc., Opel Movano, MB W203 Gross weight 882 g..

€46.44

with interchangeable fork headsfor quick release of tie rod ends, steering levers, etc.fork openings approx. 17.4 - 23.8 - 28.5 mmmanufactured from forged carbon steelhandle for manual useadaptor for air hammer use (10 mm shaft) Gross weight 2060 g Material Carbon Steel..

€50.18

for shifting/pushing the ball joint out of axle legs, drop arms, stabilisersespecially for working in narrow spacesuitable only for working on closed joints or joints with centre holewidth: 34 mm, usable height: 55 mmespecially for VW LT as of 96, Mercedes Sprinter as of 95, lower suspension joints on VW T4 Gross weight 906 g..

€54.32

forgedclamping range in 2 positions adjustable: up to 30 and 55 mmfor extracting the ball joints on tie rods and stabilizers Gross weight 1210 g Fork opening 20 - 22 mm Surface finish Satin chrome plated..

€61.48

includes the following pullers:ball joint extractor, 2 stepsfor separating of ball joints on steering and suspensiontwo step extractor for use on most cars and light commercial vehiclesoffset lever provides a maximum extracting rangejaw opening: 16 - 20 mmextracting range: 2 steps, max. 35 / 56 mmspindle: M16 x 1.5drive: 21 mm outer hexagonforged & galvanizedball joint extractorfor removing track rod end from the steering armjaw opening: 19 mmextracting range: max. 50 mmspindle: M12 x 1.75drive:..

€61.99

pulling width: 29 mmpulling height: 64 mmoverall width: 85 mmSpindle M18 x 1.5 / hexagon 19 mm Width 85 mm Gross weight 894 g..

€63.94

for easy and quick removal of tie rods and carrier jointsnarrow profile, suitable for most vehiclesthree pull-out feet sizes for use on most passenger cars, and light industrial vehiclesscope of delivery:puller foot, opening 23 mm, puller width 55 mmpuller foot, opening 28 mm, puller width 55 mmpuller foot, opening 34 mm, puller width 63 mm Gross weight 3324 g Material Carbon Steel..

€78.52

for spreading the seats of shock absorbers and steering partswith 2 exchangeable spreading inserts (5 mm and 8 mm depth) and guide pins 8x10 mm (2x) and 10x12 mm (2x) for the shock absorber seat in the wheel bearing housing when changing the damper, for wishbone ball joint seat when disassembling the suspension strut etc.slipping off is avoided by strong guiding bolts that are stuck in the screw holesa spindle with 13 mm external hexagon pushes the spreader in the opening, no need to use a hamme..

€86.99

universally applicableadjustable in 2 stepscan be used in passenger cars and vansheavy versionfor use with 17 mm hexagon socket Gross weight 1660 g Fork opening 21 mm Max. clamping width 80 mm Min. clamping width 50 mm..

€91.00

for extracting / pulling ball joints of e.g. anti-roll bar, control arm, tie rod and other ball jointssuitable for many automobiles and light trucks from Ford, Volkswagen, Mercedes-Benz, Audi, Skoda, Citroen, Peugeot, Renault, Fiat, Mazda, Toyota etc.also suitable for pulling bearings and bushingsscope of delivery:2-arm tie rod ball joint & drop arm pulleropening: 33 mm / width: 28 mmopening (inside): 55 mm / height (inside): 55 mmspindle: M16 / drive: 19 mm outer hexagonforged & galvanized2-arm..

€106.67

forged execution separatorscope of delivery:fork type, length 400 mm, fork opening 19 mmfork type, length 325 mm, fork opening 25 mmfork type, length 295 mm, fork opening 28.5 mmfork type, length 288 mm, fork opening 36 mmfork type, length 300 mm, fork opening 41.5 mm Gross weight 5730 g..

€111.19

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesmax. pressure range: 59 mm Drive profile External hexagon Gross weight 1016 g Hook foot opening 30 mm Hook foot thickness at the top 6 mm Hook length 55 mm Hex drive size 19 mm Spindle length 107 mm..

€114.85

for ejecting the ball joint out of axle legs, drop arms, stabilisersejectors are universally usable, fit e. g. Mercedes-Benz, VAG and Opelespecially for working in narrow spaceasuitable only for working on closed joints or joints with centre holesizes: 23x55, 28x55, 34x63 mm      Gross weight 3699 g..

€120.44

to replace ball joints, universal joints, brake anchor boltssuitable for SUVs, vans and other vehicles with large partsscope of delivery:step washer plate with large borestep washer plate with small boreC-frame with spindlesleeve, inner diameter: 44.4 mm, outer diameter: 50.8 mm, length: 45 mmsleeve, inner diameter: 56.6 mm, outer diameter: 63.4 mm, length: 45 mmsleeve, inner diameter: 69 mm, outer diameter: 76.1 mm, length: 56 mm Gross weight 7816 g..

€123.00

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesopening on the support fork: 23 mmopening on the puller housing: 56 mmmax. pressure range: 59 mmdrive 19 mm Gross weight 958 g..

€123.83

for separating ball jointsincludes 5 fork separators: fork opening: 20 - 24 - 30 - 35 - 42 mmsuitable for air air hammer kit e. g. BGS 3515high loosening power due to vibrationshaft diameter 10 mm Gross weight 2376 g Length 180 mm..