€12.99

for pullers from BGS 8224 Gross weight 20 g..

€16.24

for holding the Visco - clutch drive shaft in Ford, Opel and GM Gross weight 338 g Length 270 mm Packaging suitable for wall hanging Yes..

€16.24

for holding the flywheel when loosening the central screw of the crankshaft pulleysuitable for the following models:Citroen Xsara, Xantia 1.8/2.0 (XU7JP/JB) Gasoline enginesCitroen Xsara 1.8 16V (XU7JP4) Gasoline enginesCitroen ZX, Xantia, XM 2.0 16V (XU10J4) Gasoline enginesCitroen Xantia 1.9D/TD (XUD9BTF) Diesel enginesCitroen Xantia, XM2.1TD XUD11BTE Diesel enginesPeugeot 406 1.8/2.0 (XU7JP/JB) Gasoline enginesPeugeot 406 1.8 16V (XU7JP4) Gasoline enginesPeugeot 306, 405, 605 2.0 16V (XU10J4)..

€16.97

for holding the Visco - clutch drive shaft in BMW and Ford Gross weight 316 g Length 270 mm Packaging suitable for wall hanging Yes..

€17.12

for installing the elastic water pump V-ribbed beltsuitable for the following engines and vehicle models:Peugeot 108, 208, 301, 308, 408Citroën Berlingo, DS3, C3, C3II, C4IIOpel Crossland, Grandlandengines: 1.0, 1.1, 1.2 VTi, THPengine codes: HNZ, HMT, EB0, EB2, EB2DT, EB2F, B12XHT, B12XE, B12XHL, T9to be used as OEM:Opel/Vauxhall: EN-52112, EN52112Peugeot: I-0109-1, 0109-1B, 01091BCitroën: I-0109-1, 0109-1B, 01091B Gross weight 58 g Packaging suitable for ..

€17.56

295 mm long lever arm for fast and easy disassembly of radial sealing ringshardened pulling lever for long product life time Gross weight 382 g Handle type 2 component handle Length 295 mm Packaging suitable for wall hanging Yes..

€18.94

for moving the waterpump in Opel and GM in order to span the drive belt in OHC engines Gross weight 396 g Length 270 mm Packaging suitable for wall hanging Yes..

€18.97

allows precise adjustment through spindleuseful while the diagnosis of engine noise, checking the engine control, such as injector return flow test, checking the charging system, etc.clamping screw for mounting on the brake pedal Gross weight 430 g..

€20.30

for moving the waterpump in Opel and GM in order to span the drive belt in OHC engines Gross weight 396 g Length 270 mm Packaging suitable for wall hanging Yes..

€22.02

for installing the crankshaft front seal ringsuitable for 4 cylinder 2.0 TFSI petrol engines, built in e. g. Audi A3 Gross weight 210 g..

€22.63

for easy and safe loosening and tightening of the clamping washers / star washers on the underfloor panel and heat protection platessuitable for vehicle models from Audi, Škoda, Seat, Volkswagen, Ford and other vehicle manufacturerssuitable for clamping discs with original part numbers:VAG OE N90335004, N90335006, N90796501Ford OE 6715468usable with cordless drill and drilling machine Output profile Special profile Drive profile External hexagon ..

€26.76

for accurate alignment of the crankshaft pulley (vibration damper) on 1.6L (EcoBoost) enginesinstalled in the following vehicle models:Ford Focus (2010-)Ford C-Max (2011-)Ford Fiesta (2013-)Ford Fusion (2013-)Volvo models with identical enginesengine codes:HXDA, HXDB, IQDA, IQDB, IQJA, JQDA, JQDB, JQGA, JQMA, JQMB, JTBA, JTBB, JTDA, JTDB, JTJA, JTMA, JTWB, SIDA, TWAto be used as OEM: Ford 303-1550, Volvo 9997431 Gross weight 62 g Packaging suitable for wall..

€30.26

from BGS 8750 Gross weight 222 g To be used as OEM1 135120 BMW To be used as OEM2 LRT12-119 Land Rover To be used as OEM3 KM-825 Opel..

€31.73

for disassembly/assembly of 4/3-way central valve of camshaft adjustmentsuitable for VAG injection and direct injection engines 1.8 / 2.0 16V / TSI / TFSI (2004-), 1.8 / 2.0 16V TFSI (2016-) (3rd generation), 2.0 16V TFSI with timing chain (2008-)suitable for following vehicles:Audi: A3, A4, A5, Q5, TTSeat: Altea, Leon, Toledo, ExeoSkoda: Octavia II, Superb II, YetiVolkswagen: Eos, Golf, Jetta, Passat, Scirocco, Sharan, Tiguanscope of delivery:1 camshaft central valve socket, 10 mm (3/8"), to be..

€39.36

for locking / adjusting the balancer shaftL-shape with 9 mm slotto be used as OEM 118700 Gross weight 142 g To be used as OEM1 11 8 700 BMW..

€41.57

320 mm long lever arm for fast and easy disassembly of radial sealing ringslever adjustable in 5 positions of up to 45°hardened pulling lever for long product life timeanti-slip coated handle Gross weight 352 g Packaging suitable for wall hanging Yes..

€42.31

for mounting of shaft seal ringsflexible rubber spider holds the radial seal ring during centering / mountinguniversally applicable for seal rings with inside diameter from 32 mm to 60 mmscrew, washer, spider holder, handle, small and large rubber spider, 63 mm and 76 mm driver plate Gross weight 600 g..

€45.76

for loosening and fastening the camshaft wheel boltssuitable for all common camshaft sprocketsadjustable from diameter 45 - 150 mm Gross weight 574 g Packaging suitable for wall hanging Yes..

€52.15

for pulling off the gear wheel of the balancer shaftthe gear wheel is pressed on a cone of the balancer shaft and can be loosened exclusively with this special toolsuitable for BMW engines B46 and B48to be used as OEM 2361286 Gross weight 262 g To be used as OEM1 2361286 BMW..

€52.15

facilitates the disassembly and assembly of clutch cover and flywheelhardened gear segment for locking starter gear rings Gross weight 332 g Packaging suitable for wall hanging Yes..

€56.33

for assembling the front rotary shaft sealing ring on the crankshaftsuitable for 4.0 TDI V8 32V diesel (EA898), engine code: CZACbuilt in following vehicle models:Audi SQ7 (05.2016 - 08.2017)Audi SQ8 (07.2019 - 09.2020)Audi A8 (D5) (12.2019 - 09.2020)Bentley Bentayga 1 (02.2017 - 08.2019)Porsche Panamera II (11.2016 - 08.2017)VW Touareg III (05.2019 - 09.2020)to be used as OEM T40320/3 Gross weight 286 g To be used as OEM1 T40320/3 Audi To..

€61.01

for holding the crankshaft pulley of the damper when loosening or fastening the crankshaft pulley boltrequired e. g. while working on toothed belt drivesuitable for most Honda and Acura enginesas in Accord, Civic, CR-V, FR-V, Legend, Jazz, Odyssey, Prelude, S2000, Shuttle, Stream 2.0l motor, Code F20A4to be used as OEM 07MAB-PY3010Awith a 12.5 (1/2) ratchet or sliding barsocket, 19 mm (BGS 10559)can be used as additionally required alternative tool for OEM 07JAA-001020A Driv..

€64.82

32 mm x 270 mm for holding the Visco-clutch drive shaft in BMW and Ford36 mm x 270 mm for holding the Visco-clutch drive shaft in Ford, Opel and GM41 mm x 270 mm for moving the waterpump in Opel and GM in order to span the drive belt in OHC engines46 mm x 270 mm for moving the waterpump in Opel and GM in order to span the drive belt in OHC engines Gross weight 1370 g..

€68.63

ring spanner, 10 mm (3/8") drive, 12-point profile, 16 mmring spanner, 10 mm (3/8") drive, 12-point profile, 17 mmsuitable for engine mounting on Mercedes-Benz: W220, W210, W203, W221, W211, W204, W124, W140, W170, W126, W201, W202, W210 Gross weight 270 g Length 100 mm Packaging suitable for wall hanging Yes..

€70.11

for holding the crankshaft pulley while loosening and tightening the four fastening screwssuitable for engines M651, installed in the following vehicle models:Mercedes-Benz A180 (176)Mercedes-Benz A200 (176)Mercedes-Benz A220 (176)Mercedes-Benz B180 (246)Mercedes-Benz B200 (246), B220 (245)Mercedes-Benz CLA 200 (117), CLA 220 (117)Mercedes-Benz GLA 200 (156), GLA 220 (156)to be used as: OEM 651589104000 Gross weight 714 g To be used as OEM1 651589104000..

€70.85

for removing ignition coils on VAG models as of 2013pencil type for inserting in mounting hole of the ignition coilsuitable for 4 cylinder 1.2 / 1.4 / 1.8 / 2.0 FSI / TFSI engines, built in e. g. VW Golf, Audi A3, Seat Leon, Skoda Octaviato be used as OEM T10530 Gross weight 120 g Packaging suitable for wall hanging Yes To be used as OEM1 T10530 Audi To be used as OEM2 T10530 Volkswagen To be used as OEM..

€73.55

for blocking the pulley when loosening and tightening the pulley screwsuitable for the following vehicle models:Smart ForFour (2014-2019)Nissan Micra K14Dacia Sandero II TCe90Renault Capture 0.9 TCe 90Renault CLIO IV (BH) 0.9 TCe 90engine codes: H4B408, H4B453, H4BT400, H4BT401, H4BT408, H4BT410, H4BT411, H4BT451, H4D400, H5F408, H5F410, H5FT400, H5FT402, H5FT403, H5FT404, H5FT405, H5FT408, H5FT410, H5FT412, HR09DET, HRA2DDT, M281910, M281920to be used as OEM MOT 2054, MOT 2025, W281589004000 ..

€75.18

suitable for the following models:Mondeo and Transit with 2.0 / 2.2 / 2.4 / 3.2 Duratorq Di, TDDi, TDCi Diesel and 2.3 Duratec HE petrolto be used as OEM 303-1310 Gross weight 1738 g Length 665 mm To be used as OEM1 303-1310 Ford..

€75.77

simplifies the assembly and disassembly of oil coolersscrewed support bracket, 180° rotatableHolding forks, 15 and 22 mmdistance adjustable (like water pump pliers) Gross weight 352 g..

€82.41

used to remove the sprocket on high pressure diesel pumpssuitable for Hyundai & KIA 2.0 / 2.2 CRDI engines with a timing chainto be used as OEM 09331-1M100 Gross weight 368 g To be used as OEM1 09331-1M100 Hyundai To be used as OEM2 09331-1M100 Kia..