€3.94

for pushing out small dents, e.g. hail damage, etc.made of plastic, front rounded Gross weight 36 g Diameter 18 mm Length 120 mm Material Plastic..

€10.33

suitable for BGS 1659 Gross weight 40 g..

€13.28

suitable for BGS 865without content Gross weight 26 g..

€14.61

for removing of water on all even surfaces, such as windshieldssoft silicone, very gentle to surfaces Width 300 mm Gross weight 214 g Packaging suitable for wall hanging Yes..

€17.71

with excellent adhesive properties on car bodiessuitable for BGS 865, 8057 Gross weight 286 g..

€21.65

for paintless dent repairwith 4 exchangeable tipslength can be reduced to 70 mm using the spacer Gross weight 86 g Packaging suitable for wall hanging Yes..

€24.48

suitable for BGS 865also suitable for BGS 865-6 and 865-7includes the following pads:round, adhesive surface convex: Ø 15 - 20 - 25 mmround, adhesive surface straight: Ø 32 - 36 - 42 mmoval, adhesive surface straight: 23 x 34 - 28 x 41 - 33 x 48 mmrectangle, adhesive surface straight: 20 x 30 - 23 x 35 - 32 x 49 mm Gross weight 48 g..

€25.83

for removing water on all even surfaces, such as windshieldssoft silicone, very gentle to surfacescompletely flexible, even for areas that are difficult to reachsoft silicone handle prevents damage Width 300 mm Gross weight 302 g Packaging suitable for wall hanging Yes..

€28.29

suitable for BGS 865, BGS 865-6 and 865-7scope of delivery:1 dent repair pad, rectangular, large: 32 x 16 mm1 dent repair pad, round, large: diameter Ø 32 mm1 dent repair pad, round, middle: diameter Ø 19 mm1 dent repair pad, round, small: diameter Ø 13 mm1 dent repair pad, oval: 32 x 13 mm1 dent-pad, star-shaped: max. Ø 14 mm Gross weight 80 g Length 22 mm Material Aluminium..

€30.75

to removing dentssuitable for dent repair pads BGS 874 Gross weight 116 g..

€47.97

board size 200 x 240 mm350 mm articulated arm with 70 mm suction cup Gross weight 468 g..

€47.97

board size 200 x 240 mm350 mm articulated arm with 70 mm suction cup Gross weight 580 g..

€52.89

Gross weight 1700 g..

€90.77

ideal for better identification of dents and bumps, e.g. hail damage, stone-chipping or small parking damagesasymmetric lines for presice detection of minor deformationssuitable for mobile use, folds in secondsin practical storage pouch Ø 300 mmwith plastic handle Gross weight 468 g..

€96.43

460 mm sliding hammer with adaptor head for pads,sliding hammer weight: For up to 180 gadaptor head thread: M12 x 1.75material: aluminum, anodisedincludes the following pads:round, adhesive surface convex: Ø 15 - 20 - 25 mmround, adhesive surface straight: Ø 32 - 36 - 42 mmoval, adhesive surface straight: 23 x 34 - 28 x 41 - 33 x 48 mmrectangle, adhesive surface straight: 20 x 30 - 23 x 35 - 32 x 49 mm Gross weight 1076 g..

€126.94

for pushing out small dents, e.g. hail damage, etc.2 Retainer plates 155 mm long1 aluminium handle 90 mm long1 aluminium handle 130 mm longwith following interchangeable heads:1 cylinder form Ø 16 mm, 56 mm long1 cylinder form, tapered, Ø 6 mm, 56 mm long1 wedge shape, round, 8 x 16 mm, 56 mm long1 wedge shape, square, 8 x 16 mm, 56 mm long1 wedge shape, round, 4 x 16 mm, 56 mm long1 wedge shape, square, 4 x 16 mm, 56 mm long1 conical, sharp, 56 mm long1 conical, round, 56 mm long ..

€155.47

suitable for dent repair set BGS 865 Gross weight 1020 g..

€215.79

for the removal of dents in a car’s body without damaging the finishideal for removing small dents and damaging caused by hailmade of stainless steelvarious head formsdelivered in a handy carrying casescope of delivery:2 half-round bars 210 / 220 mm1 round bar 420 mm1 half-round pointed bar 600 mm2 angled ball-headed bars 460 / 1000 mm, plastic head with M5 x 0.81 thread1 pointed bar 500 mm1 special-type hooked bar 1070 mm Gross weight 852 g..

€221.40

when using the pump the hammer creates vacuum and causes the vacuum pad to hold firmly on to the body and dents can now easily be removed by working the sliding hammerno air compressor needed3 replaceable strainers: Ø 70 mm, Ø 100 mm, Ø 125 mmSlide hammer weight: 1100 g Gross weight 4594 g..

€316.16

suitable for removing dents, ideal even with hail damageallows repair of dents without paintingno need to disassemble car body partsdisassembly of panels is rarely necessaryrepair costs can be kept low, no painting costset consists of all bumping tools needed in various lengths and shapesmade of stainless and carbon steelalso contains air inflating pillow, trim strip wedge and other parts Gross weight 8082 g..

€717.63

suitable for removing dentsincludes irons with round, flat, point and ball headsmade of 5 to 14 mm round stainless steel45° up to 135° bent headslength: 250 mm to 1150 mmPVC dipped handlesin aluminum transport casewith strip holders for denting irons Gross weight 18700 g..