€3.84

lead-free compositionfor working on conductor boardsensures reliable solder connectionswith good flow properties and high conductivitystructure: Sn99.3Cu0.7melting point: 217 - 227 °C Gross weight 10 g Diameter 1 mm..

€7.77

non-woven flap disc with fanned-out non-woven abrasive fleece on a fiber glass backing padfor preparing and polishing surfacespreparing varnished surfaces and for polishingfor fine sanding large surfaces and for finishing workcan be installed directly on the angle grinder without an additional sanding discensures an even and high-quality surface finishrobust and durableextra fine gritmax. r.p.m.: 9500 Mounting hole 22,23 mm Gross weight 54 g ..

€7.77

non-woven flap disc with fanned-out non-woven abrasive fleece on a fiber glass backing padfor preparing and polishing surfacespreparing varnished surfaces and for polishingfor fine sanding large surfaces and for finishing workcan be installed directly on the angle grinder without an additional sanding discensures an even and high-quality surface finishrobust and durablemedium gritmax. r.p.m.: 9500 Mounting hole 22,23 mm Gross weight 80 g D..

€8.86

non-woven flap disc with fanned-out non-woven abrasive fleece on a fiber glass backing padfor preparing and polishing surfacespreparing varnished surfaces and for polishingfor fine sanding large surfaces and for finishing workcan be installed directly on the angle grinder without an additional sanding discensures an even and high-quality surface finishrobust and durablemedium gritmax. r.p.m.: 9500 Mounting hole 22,23 mm Gross weight 84 g D..

€14.76

for dismantling and assembling the right stub shaftsuitable for following vehicle models:Volkswagen Transporter (> 2004)Volkswagen Sharan (> 1996)with 6-speed manual transmission 0A5, 4-wheel and 6-speed manual transmission 02Nto be used as OEM: T10107A (T10107)length: 350 mmoutput profile: internal hexagondrive profile: internal squaredrive profile size, inch: 1/2"drive profile size, metric: 12.5 mmoutput profile size: 6 mmmaterial: chrome vanadium steel (S2)surface finish: satin chrome plated ..

€17.52

for drilling out the damaged threadoversize due to the required core hole size for the new threadwith reduced shankfully groundright hand cutting Gross weight 146 g Core hole size 16,4 mm Material HSS steel (M2 / 1.3343 / HS-6-5-2C / SKH51) Split point 135 ° Packaging suitable for wall hanging Yes..

€18.70

compact, slim design for working in confined spaces and hard-to-reach areasfinetooth with 90 teethinserted reversible leverquick-release button for fast tool changesergonomic two-component handle Output profile External square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm No. of teeth in ratchet head 90 Gross weight 309 g Handle type 2 component handle ..

€20.91

compact, slim design for working in confined spaces and hard-to-reach areasfinetooth with 90 teethinserted reversible leverquick-release button for fast tool changesergonomic two-component handle Output profile External square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm No. of teeth in ratchet head 90 Gross weight 490 g Handle type 2 component handle ..

€23.37

suitable for various polishing jobs and paint cleaning on vehicles and vehicle surfacesgrinding pastes, polish and wax can be applied effortlessly with the spongesgrinding disc with a foam layer as a damping component for comfortable workingwith hook and loop pad for polishing discs and spongesM14 threaded mandrel for direct assembling on a polishing/sanding machineincl. mandrel (shaft diameter 8 mm) for use with electric drill or cordless drill..

€25.98

for drilling out the damaged threadoversize due to the required core hole size for the new threadwith reduced shankfully groundright hand cutting Gross weight 170 g Core hole size 18,4 mm Material HSS steel (M2 / 1.3343 / HS-6-5-2C / SKH51) Split point 135 ° Packaging suitable for wall hanging Yes..

€30.70

for drilling out the damaged threadoversize due to the required core hole size for the new threadwith reduced shankfully groundright hand cutting Gross weight 198 g Core hole size 20,4 mm Material HSS steel (M2 / 1.3343 / HS-6-5-2C / SKH51) Split point 135 ° Packaging suitable for wall hanging Yes..

€38.77

for drilling out the damaged threadoversize due to the required core hole size for the new threadwith reduced shankfully groundright hand cutting Gross weight 274 g Core hole size 24,5 mm Material HSS steel (M2 / 1.3343 / HS-6-5-2C / SKH51) Split point 135 °..

€39.26

for repairing hoses on windshield washer systemsreplace defective areas in wiper water tubes quickly and easilyideal for historic vehicles, can also be used on newer vehicle modelsplug-in connectionsno hose clamps requiredscope of delivery:1 PVC hose, 4 m, transparent, for 4.8 mm (3/16") connectors5 angle connectors, 90°, 4.8 mm (3/16")5 straight connectors, 4.8 mm (3/16")5 T-type connectors, 4.8 mm (3/16")2 one-way valves, 4.8 mm (3/16")1 hose cutter Gross weight 468 g ..

€63.96

for thread repair of damaged or worn-out threadsfor new high stbale and long-lasting internal threadsperfect for maintenance and installationthe repair is carried out in just a few stepsdrill out the damaged thread with the twist drilluse the special tap to cut the internal thread into the drilled holeto install, place the thread insert on the installation tool and screw it in the threadinsert with light pressurethe use of cutting oil is recommendedscope of delivery:1 HSS twist drill | core hole..

€110.58

visually appealing and space-saving seating optionsuitable for sales counter, cash desks, workshop, etc.solid frame construction made of steel tube with 4 swivel castorsstepless height adjustment of the seatergonomically shaped, comfortable seat with PU foam paddingrotation range seat area: 360°backrest: 120 mmseat material: PU foam cushion, PU imitation leatherframe material: steel tubediameter frame: Ø 25 mm Max. capacity 150 kg Gross weight 8222 g ..

€117.98

visually appealing and space-saving seating optionsuitable for sales counter, cash desks, workshop, etc.solid frame construction made of steel tube with 4 feetstepless height adjustment of the seatergonomically shaped, comfortable seat with PU foam paddingplastic caps on the feet provide an anti-slip effect and are especially quietrotation range seat area: 360°backrest: 120 mmseat material: PU foam cushion, PU imitation leatherframe material: steel tubediameter frame: Ø 25 mm ..

€125.87

visually appealing and space-saving seating optionsuitable for sales counter, cash desks, workshop, etc.solid frame construction made of steel tube with 4 feetstepless height adjustment of the seatergonomically shaped, comfortable seat with PU foam paddingextra high backrest for a comfortable seatingplastic caps on the feet provide an anti-slip effect and are especially quietrotation range seat area: 360°backrest: 330 mmseat material: PU foam cushion, PU imitation leatherframe material: steel tu..