€7.48

DIN 7261 - F 150 - 1form F1st cut (coarse)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 168 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€7.68

DIN 7261 - A 150 - 1form A1st cut (coarse)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 130 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€7.68

DIN 7261 - A 150 - 2form A2nd cut (middle)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 170 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€7.68

DIN 7261 - F 200 - 2form F2nd cut (middle)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 88 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€7.68

DIN 7261 - D 150 - 1form D1st cut (coarse)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 135 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.07

DIN 7261 - A 150 - 3form A2nd cut (fine)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 135 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.07

DIN 7261 - F 200 - 3form F3rd cut (fine)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 168 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.07

DIN 7261 - D 150 - 2form D2nd cut (middle)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 170 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.27

DIN 7261 - D 150 - 3form D3rd cut (fine)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 96 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.86

DIN 7261 - C 150 - 1form C1st cut (coarse)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 170 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€8.86

in plastic caseflat, round, square, triangle, half-round, flat taper2 component handles Gross weight 220 g Stroke 3 Packaging suitable for wall hanging Yes..

€9.05

DIN 7261 - C 150 - 2form C2nd cut (middle)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 170 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€9.25

DIN 7261 - F 200 - 1form F1st cut (coarse)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 172 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€9.25

DIN 7261 - C 150 - 3form C3rd cut (fine)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 170 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€9.45

DIN 7261 - F 200 - 2form F2nd cut (middle)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 164 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€9.64

DIN 7261 - A 200 - 1form A1st cut (coarse)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 197 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€9.84

DIN 7261 - E 150 - 1form E1st cut (coarse)halfround file with pivot and cut on two sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 124 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€9.84

DIN 7261 - A 200 - 2form A2nd cut (middle)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 232 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€9.84

DIN 7261 - F 200 - 3form F3rd cut (fine)round file with framed cutlabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 170 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€9.84

DIN 7261 - D 200 - 1form D1st cut (coarse)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 197 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€10.04

DIN 7261 - E 150 - 2form E2nd cut (middle)halfround file with pivot and cut on two sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 126 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€10.04

DIN 7261 - D 200 - 2form D2nd cut (middle)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 178 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€10.23

DIN 7261 - E 150 - 3form E3rd cut (fine)halfround file with pivot and cut on two sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 150 mm (without handle) Gross weight 126 g DIN standard 7261 Length 150 mm Packaging suitable for wall hanging Yes..

€10.23

DIN 7261 - A 200 - 3form A3rd cut (fine)rectangular file with pivot and cut on three sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 232 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€10.23

DIN 7261 - D 200 - 3form D3rd cut (fine)square file with cut on four sideslabor-saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 270 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€10.43

DIN 7261 - C 200 - 1form C1st cut (coarse)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 197 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€10.82

file length 140 mmin plastic pouchdifferent shapes: round, square, triangle, halfround, flat, etc. Gross weight 112 g Packaging suitable for wall hanging Yes..

€11.22

DIN 7261 - C 200 - 2form C2nd cut (middle)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 197 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€11.61

DIN 7261 - C 200 - 3form C3rd cut (fine)triangle, cuspid file with cut on three sideslabor-save file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 270 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..

€11.81

DIN 7261 - E 200 - 1form E1st cut (coarse)halfround file with pivot and cut on two sideslabor saving file teethuniversally applicable e.g. for surface machining, deburring etc.non-slip 2-component handlelength: 200 mm (without handle) Gross weight 234 g DIN standard 7261 Length 200 mm Packaging suitable for wall hanging Yes..