€39.00

HSS-Co (M35 quality) - 135° split point TDS.100Sizes Ø 1 – 10 mm in 0,5 mm incrementsHSS-Co (M35 quality)DIN 338135° split pointCompatible with every drill chuckSet ContentØ 1 - TDCO.010Ø 1,5 - TDCO.015Ø 2 - TDCO.020Ø 2,5 - TDCO.025Ø 3 - TDCO.030Ø 3,5 - TDCO.035Ø 4 - TDCO.040Ø 4,5 - TDCO.045Ø 5 - TDCO.050Ø 5,5 - TDCO.055Ø 6 - TDCO.060Ø 6,5 - TDCO.065Ø 7 - TDCO.070Ø 7,5 - TDCO.075Ø 8 - TDCO.080Ø 8,5 - TDCO.085Ø 9 - TDCO.090Ø 9,5 - TDCO.095Ø 10 - TDCO.100..

€40.40

FEATURES:These Expert Quality M35 high speed steel drill bits are manufactured with 5% cobalt for long-lasting performance, abrasion resistance and heat protection. Fully ground with a 135° split point for precise centring to prevent drill wander. For optimal results and a longer lifetime, Draper cobalt drill bits work best in conjunction with a cooling agent. Suitable for use with alloy steel, titanium alloys, stainless steel, hardened steel, cast iron and carbon steel. Compatible with a standa..

€50.33

Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.Made from HSS ( High Speed Steel ).Set of 3 consisting 1 of each 4-14 mm, 6-20 mm, 6-30 mm.Supplied in a metal case.Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific siz..

€50.73

SDS Plus, ensures maximum power transmission due to its unique fluted shaft.This effectively removes situations where a perfectly serviceable cutting edge is rendered useless by a worn shank.The SDS Plus system also enables faster changing of drills using a quick release keyless chuck.Heavy-Duty. Tungsten Carbide tip.SDS-Plus Fitting 11 piece masonry drill set , assorted sizes and lengths.Contents:1 x 5 mm x 110 mm1 x 6 mm x 110 mm1 x 6 mm x 160 mm 1 x 8 mm x 160 mm1 x 10 mm x 160 mm1 x 10 mm x ..

€51.26

The Faithfull HSS taper drills are used for drilling sheet materials. They will drill a hole of any diameter between the stated sizes. Please note that use of a cutting fluid is advisable with this drill.The Faithfull FAITDSET3 taper drill set of 3 are made from high speed steel (HSS) consisting of:1 x 4-12mm1 x 6-20mm1 x 16-30mmThe set is supplied in a metal storage case.1 x 4-12mm1 x 6-20mm1 x 16-30mmThe Faithfull HSS taper drills are used for drilling sheet materials. They will drill a hole o..

€56.79

Faithfull Professional high speed steel (HSS) drill bits are manufactured from high quality M2 grade tool steel, to meet the requirements of the DIN 338 standard.Each bit has a fully ground flute and cutting tip, featuring a 135 degree point angle and split point providing easy non-slip starting and precision drilling. All these great features help you to achieve superior performance in most materials.Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless S..

€58.84

Made of HSS-G M35 cobalt steel, for longer service lifeSpecificationTwist drill 1.0 - 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0 - 4.5 - 5.0 - 5.5 - 6.0 - 6.5 - 7.0 - 7.5 - 8.0 - 8.5 - 9.0 - 9.5 - 10.0 mm BGS technic KG, a traditional German, family-owned, owner-managed company, has been offering a constantly growing selection of hand tools and special automotive tools for over 45 years...

€59.28

These high speed steel drill bits are manufactured with a titanium nitride coating for enhanced strength and longer life. Fully ground with a 135° split point for precise centring to prevent drill wander. Draper Titanium Series drill bits work best in conjunction with a cooling agent. Suitable for use with steel, non-ferrous metals, wood and hard plastic. Compatible with a standard 10/13mm chuck. Sizes 1.5-10.0mm. Supplied inside a plastic case.Titanium nitride coating for enhanced strength and ..

€69.86

A substantial set of German quality HSS drill bits coated with titanium nitrite for increased durability & service life. They're ideal for general purpose drilling tasks in most common materials including hard & soft wood, plastics and most alloys & metals too. Manufactured in accordance with DIN 338Ground edgesIn Metal CaseIncludes the following tools:Twist drills:15 x Ø 1.0 mm15 x Ø 1.5 mm10 x Ø 2.0 mm10 x Ø 2.5 mm12 x Ø 3.0 mm10 x Ø 3.5 mm12 x Ø 4.0 mm10 x Ø 4.5 mm8 x Ø 5.0 mm8 x..

€70.11

for precise and accurate drilling in masonry, natural stone and concretelong-life carbide tiptransfer of force directly to the drilling pointto be used with hammer drillshigh drill stabilityright hand cutting3 hammer drills Ø 8 mm, 210 mm3 hammer drills Ø 10 mm, 210 mm5 hammer drills Ø 5mm, 160 mm5 hammer drills Ø 6 mm, 160 mm5 hammer drills Ø 8 mm, 160 mm5 hammer drills Ø 10 mm, 160 mm5 hammer drills Ø 12 mm, 160 mm5 hammer drills Ø 4 mm, 110 mm10 hammer drills Ø 5 mm, 110 mm10 hammer drills Ø ..

€86.88

FEATURES:These Expert Quality M35 high speed steel drill bits are manufactured with 5% cobalt for long-lasting performance, abrasion resistance and heat protection. Fully ground with a 135° split point for precise centring to prevent drill wander. For optimal results and a longer lifetime, Draper cobalt drill bits work best in conjunction with a cooling agent. Suitable for use with alloy steel, titanium alloys, stainless steel, hardened steel, cast iron and carbon steel. Compatible with a standa..

€113.16

A substantial set of German quality HSS drill bits coated with titanium nitrite for increased durability & service life. They're ideal for general purpose drilling tasks in most common materials including hard & soft wood, plastics and most alloys & metals too. RolledGround edgesIn metal caseGross weight 3678 gIncludes the following tools:Each 10 twist drills: Ø 1.0 - 8.0 mm (in 0.5 mm steps)Each 5 twist drills: Ø 8.5 - 10.0 mm (in 0.5 mm steps) BGS technic KG, ..

€120.85

These high speed steel drill bits are fully ground with a 135° split point for precise centring to prevent drill wander. The black oxide coating ensures the drill bits are more durable and resistant to corrosion than standard HSS bits. Draper Black Series drill bits do not need to be used in conjunction with a cooling agent. Suitable for use with metal, wood, chipboard and plastic. Compatible with a standard 10/13mm chuck. Sizes 1.0-10.0mm. Supplied inside a metal case.Fully ground with a 135° s..

€123.38

Faithfull Professional high speed steel (HSS) drill bits are manufactured from high quality M2 grade tool steel, to meet the requirements of the DIN 338 standard.Each bit has a fully ground flute and cutting tip, featuring a 135 degree point angle and split point providing easy non-slip starting and precision drilling. All these great features help you to achieve superior performance in most materials.Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless S..