Marshalltown
Count: 166
€16.58
The Marshalltown M-T5763 Joint knife has the following dimensions:Size: 150mm (6 inch)This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade. It has a full tang throughout the handle, with a hammer end...
Add to Cart€31.03
Marshalltown 65SSD Stainless Steel Internal Corner Trowel Square Size: 150 x 63mm (6in x 2.1/2in).Internal corner trowel designed for forming internal corners after plastering. Stainless steel blades with back mountings. Light and easy to use with comfortable DuraSoft® handles. Available with square or 1/2in radius rounded corners. Size: 150 x 63 x 63mm (6 x 2.1/2 x 2.1/2in)...
Add to Cart€31.03
A pencil radius internal corner trowel. 1/2 in radius rounded corners.Internal corner trowel designed for forming internal corners after plastering. Stainless steel blades with back mountings. Light and easy to use with comfortable DuraSoft® handles. Available with square or 1/2in radius rounded corners. Size: 150 x 63 x 63mm (6 x 2.1/2 x 2.1/2in)...
Add to Cart€31.03
Marshalltown 67SSD Stainless Steel External Corner Trowel SquareExternal corner trowel designed for forming external corners after plastering. Stainless steel blades with back mountings. Light and easy to use with comfortable DuraSoft® handles. Available with square or 1/2in radius rounded corners. Size: 150 x 63 x 63mm (6 x 2.1/2 x 2.1/2in)...
Add to Cart€12.76
Size 12 and 16mm (1/2 and 5/8 in).Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA...
Add to Cart€12.76
Size 19 and 22mm (3/4 and 7/8 in).Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA...
Add to Cart€12.76
Size 16 and 19mm (5/8 and 3/4 in).Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA...
Add to Cart€65.51
These Marshalltown Neolite Knee Pads have a tough construction and stand up under hard wear and tear. They are felt lined and shaped to fit the knee. These knee pads are held in place by one leather strap which will not slip or bend...
Add to Cart€31.63
Constructed from foam rubber and shaped to fit at the knee. With webbed belts to hold them in place...
Add to Cart€12.76
Size 10 and 12mm (3/8 X 1/2 in).Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA...
Add to Cart€5.75
Pair of hardwood brick line blocks.Used instead of line pins.Pack of 2...
Add to Cart€9.82
Plastic brick line blocks used instead of line pins when laying bricks. Pack of 2...
Add to Cart€46.61
This Marshalltown Brick Tong is designed to make carrying bricks easier. It is maintenance free and has a heavy-duty design for hard wear and tear. It is adjustable to carry between 6 to 10 bricks.Size 154 x 422 x 76mmWeight: 1.42 KG..
Add to Cart€46.61
€22.64
Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in..
Add to Cart€34.49
Marshalltown Compound Tile Nippers require less effort than standard nippers. They are suitable for removing small pieces or irregular edges from tile. They have a durable cast steel body with rugged carbide tips that are great for cutting curves or shapes. Fitted with comfortable, soft grip handles...
Add to Cart€157.36
1 x Marshalltown EzyScreed™ Level 1.2m (4ft)The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life...
Add to Cart€191.77
1 x Marshalltown EzyScreed™ Level 1.8m (6ft)The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life...
Add to Cart€222.45
1 x Marshalltown EzyScreed™ Level 2.4m (8ft)The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life...
Add to Cart€50.99
The Marshalltown Flooring Cross-Cutter is easily transported, so you can cut where you work without dust, noise or electricity. The dual-mount fence can be adjusted for added board width flexibility, up to 216mm (8.1/2in) wide. A separate board support stand is included to help you cut longer boards. Specification: Max. Cutting Width: 216mm (8.1/2in)Max. Cutting Thickness: Rigid Core Vinyl 7mm, Laminate 10mm..
Add to Cart€609.21
This Marshalltown Flooring Shear cuts vinyl tile, plank, laminate, engineered wood, and more. It allows you to cut where you work without dust, noise, or electricity. The shear comes with a moveable fence for 90° and 45° cuts. It also has a built-in ruler for accurate cuts. Specification: Max. Cutting Width: 330mm (13in)Max. Cutting Thickness: 12.7mm (1/2in)..
Add to Cart€609.21
€27.98
The Marshalltown Glass Nippers have a durable cast steel body and round blades that evenly cut both sides of tile. They can be used to cut straight lines or small precision cuts in glass mosaic tiles, and the blade can be rotated to keep them sharp. Fitted with comfortable soft grip handles...
Add to Cart€27.98
€15.36
The Marshalltown Handheld Tile Cutter can be used to score and snap ceramic tiles. It has a durable cast steel body and a tungsten carbide scoring wheel. The handles are fitted with comfortable soft grips. Ideal for cutting and snapping curves...
Add to Cart€375.50
The Marshalltown Lightweight Flooring Shear has a lightweight, compact design that allows you to cut where you work without dust, noise, or electricity. Unique features include a movable aluminium fence for precise, repeatable 45 degree cuts, and an integrated handle for easy, single hand carrying. It is the essential tool for your next vinyl, laminate, or engineered wood flooring installation. Proudly made in the USA with Global Materials. Specification: Max. Cutting Width: 330mm (13in)Max. ..
Add to Cart€23.61
This Marshalltown Straight Edger is designed to produce a radius at the edge of a concrete slab to prevent the edge from chipping. This edger has a heavy gauge premium stainless-steel blade with a sturdy steel mounting welded to it. The resilient DuraSoft handle provides a soft feel that reduces fatigue and offers excellent durability.Size: 203 x 152 mm (8 x 6 inches)..
Add to Cart€18.96
Marshalltown M136D cement edger designed to give a good finish on steps and verges with a blade of polished steel with sturdy steel mountings. Light and easy-to-use with a comfortable DuraSoft® handle. Size: 150 x 75mm (6 x 3in).Curved Ends with 10mm (3/8in) Radius...
Add to Cart€117.36
1 x Marshalltown M13743 Aluminium Combo Screed 6ft (1.8m)Lightweight, aluminium constructionCan be used as a screed, float or check rodDual edge design: sharp edge for cutting and round edge for floating concreteAdjustable brackets and handle..
Add to Cart€142.89
1 x Marshalltown M13744 Aluminium Combo Screed 8ft (2.4m)Lightweight, aluminium constructionCan be used as a screed, float or check rodDual edge design: sharp edge for cutting and round edge for floating concreteAdjustable brackets and handle..
Add to Cart€159.01
1 x Marshalltown M13745 Aluminium Combo Screed 10ft (3.0m)Lightweight, aluminium constructionCan be used as a screed, float or check rodDual edge design: sharp edge for cutting and round edge for floating concreteAdjustable brackets and handle..
Add to Cart€55.78
The Marshalltown M143D Magnesium Float is fully rounded to eliminate float marks when preparing a concrete surface for trowelling. The magnesium blade material is durable, lightweight and ensures a smoother finish than a wooden float. Its curved DuraSoft® handle is held firmly in place by a nut and washer...
Add to Cart€44.92
The Marshalltown M145 Square Ended Magnesium Float has a shaped wooden handle that is positioned to give perfect balance and is secured with screws that will not back out. Made from very hard, durable and lightweight magnesium (lighter than traditional trowels). Magnesium floats produce a smoother finish than wood. Size: 16 x 3.1/8in (400 x 80mm)..
Add to Cart