Special Offers
Draper Contractors Saw, 315mm, 2000W (84708)
Ideal for workshop use, with the added benefit off being fitted with large rear wheels, perfect for transporting to and from different work sites. The large extension table can be fitted to the side or the rear of the saw for added flexibility. Supplied with: 40T TCT blade, mitre guide, dust extraction hose. push stick and moulded cable and approved plug.Front locking rip fenceMitre guideRise and fall tilt bladeDust extraction hoseSupplied with 40T TCT blade, push stickLarge rear wheels, perfect..
€499.00 €718.79 Ex Tax: €405.69
Draper Contractors Secure Storage Box (36 inches) 905mm x 425mm x 400mm
FEATURES: Contractors storage boxes manufactured from heavy-duty 1.5mm sheet steel that’s been sprayed with a protective powder coated finish. Ideal for use on building sites, in vans and workshops or garages. Each contractors storage box is attached with gas struts and fitted with an integrated single pin hinge. The feet are fitted with four bolt holes allowing it to a fixed to a solid base and each foot is raised enabling easier manoeuvrability of the unit using a fork lift truck Incorporat..
€426.18 €525.06 Ex Tax: €346.49
Draper Contractors Secure Storage Box (Black Box®) 1210mm x 605mm x 470mm
FEATURES: Heavy duty contractors storage boxes manufactured from sheet steel with powder coated finish. Ideal for use on site, in vans, workshops or garages. Feet with bolt holes for fixing to a solid base to avoid complete removal. Gas strut and integrated single pin hinge. Heavy duty lifting handles and the raised feet allow for easier movement by fork lift trucks. Two cut outs on front for padlock attachment. Carton packed. VAT Rated At:20.00%Barcode:5010559055449Outer Box Qty1Weight63...
€708.48 €870.15 Ex Tax: €576.00
Draper Contractors Secure Storage Box , 48"/1200 x 600 x 600mm (78787)
Heavy duty contractors storage boxes manufactured from sheet steel with powder coated finish. Ideal for use on site, in vans, workshops or garages. Feet with bolt holes for fixing to a solid base to avoid complete removal. Gas strut and integrated single pin hinge. Heavy duty lifting handles and the raised feet allow for easier movement by fork lift trucks. Two cut outs on front for padlock attachment.Heavy duty contractors storage boxes manufactured from sheet steel with powder coated finish.Id..
€708.48 €870.15 Ex Tax: €576.00
Draper Coping Saw and 5 Blades
FEATURES: Chrome plated frame with wooden handle and Supplied with five assorted blades. Blade can be turned through 360° for intricate work. Display packed. VAT Rated At:20.00%Barcode:5010559180523Inner Box Qty5Outer Box Qty100Weight0.184kgs View product in our catalogue: Page 398 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guara..
€13.95 €24.29 Ex Tax: €11.34
Draper Cotton Apron
FEATURES: Heavy duty cotton with neck loop, extra long waist ties and front pocket. Packed in polythene bag with display card. VAT Rated At:20.00%Barcode:5010559729302Outer Box Qty100Weight0.198kgs View product in our catalogue: Page 531 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€8.28 €11.92 Ex Tax: €6.73
Draper Cranked Metric Ring Spanner Set (5 Piece)
FEATURES: Forged from chrome vanadium steel hardened, tempered and chrome plated. Display packed. VAT Rated At:20.00%Barcode:5010559350896Inner Box Qty2Outer Box Qty50Weight0.685kgs View product in our catalogue: Page 78 View more products in this category CONTENTS:10 x 11,12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€23.25 €28.45 Ex Tax: €18.90
Draper Crevice Nozzle
FEATURES: VAT Rated At:20.00%Barcode:5010559485505Weight0.038kgs View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€5.54 €5.54 Ex Tax: €4.50
Draper Crevice Nozzle for SWD1100A
FEATURES: VAT Rated At:20.00%Barcode:5010559279524Weight0.038kgs View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€7.13 €8.38 Ex Tax: €5.80
Draper Crevice Nozzle for VC1600 and VC2000B
FEATURES: VAT Rated At:20.00%Barcode:5010559190034Weight0.027kgs View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€4.23 €4.22 Ex Tax: €3.44
Draper Crevice Nozzle for WDV10, WDV15A and WDV20ASS
FEATURES: VAT Rated At:20.00%Barcode:5010559069460Weight0.037kgs View product in our catalogue: Page 585 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€4.11 €4.99 Ex Tax: €3.34
Draper Crevice Nozzle for WDV18
FEATURES: VAT Rated At:20.00%Barcode:5010559024230Weight0.666kgs View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€6.03 €6.03 Ex Tax: €4.90
Draper Crocodile Clip Probe Set for 37317 Pocket Analogue Multimeter
FEATURES: VAT Rated At:20.00%Barcode:5010559513468Weight0.023kgs View product in our catalogue: Page 426 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee...
€6.94 €8.15 Ex Tax: €5.64
Draper Cupped Nailset and Centre Punch Set (2 Piece)
FEATURES: Square section striking head with knurled body and polished ends. Carbon steel hardened and tempered. Display packed. VAT Rated At:20.00%Barcode:5010559135097Inner Box Qty4Outer Box Qty120Weight0.079kgs View product in our catalogue: Page 510 View more products in this category CONTENTS:3mm dia. nailset and centre punchBRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guaran..
€7.13 €8.92 Ex Tax: €5.80
Draper Curved Jaw Self Grip Pliers Set (3 Piece) (14040)
Three piece curved jaw pattern set manufactured from good quality carbon steel hardened and tempered. Serrated gripping surfaces and adjustable opening with quick release lever.Contents: 140, 190 and 220mm longSerrated gripping surfaces and adjustable opening with quick release lever..
€24.95 €38.75 Ex Tax: €20.28
Draper Cutting Mat 300 x 450
FEATURES: For cutting without damaging surfaces. Unique self-healing coated non-slip surface. Ideal for model makers, artists etc. 10mm alignment grid. Cutting Mat thickness 3mm. Shrink wrapped for security. VAT Rated At:20.00%Barcode:5010559693351Inner Box Qty12Outer Box Qty36Weight0.586kgs View product in our catalogue: Page 323 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufact..
€13.93 €20.30 Ex Tax: €11.32
Draper CV Boot Tool (36702)
This tool allows the user to renew the CV boot of a vehicle without dismantling the CV joint. Manufactured from nylon with a 19mm hexagon bar fitted to the base.Renew the CV boot of a vehicle without dismantling the CV joint19mm hexagonal base..
€24.34 €40.21 Ex Tax: €19.79
Draper D-Handle Wire Brush (160mm)
FEATURES: Curved pattern with four sturdy wire rows. Curved pattern allows cleaning in hard to reach corners. Manufactured with tough robust plastic stock and handle. Display packed. VAT Rated At:20.00%Barcode:5010559310777Inner Box Qty12Outer Box Qty36Weight0.167kgsLength160mmRows of Wire4 x 36 View product in our catalogue: Page 728 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manu..
€5.17 €6.46 Ex Tax: €4.20
Draper D222 Thread Lock
FEATURES: Ideal for low-strength thread locking on adjusting screws, countersunk head screws and set screws. Very good on low strength metals which could break during disassembly. Low strength break away - 6Nm. Display packed. VAT Rated At:20.00%Barcode:5010559246571Outer Box Qty20Weight0.110kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusia..
€13.62 €22.61 Ex Tax: €11.07
Draper D243 Nut Lock
FEATURES: Medium strength (16Nm break away) oil tolerant design for direct application onto parts where a light oily film exists or where surrounding parts contamination is a problem. Display packed. VAT Rated At:20.00%Barcode:5010559246601Outer Box Qty20Weight0.110kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quali..
€13.62 €22.61 Ex Tax: €11.07
Draper D270 Stud Lock
FEATURES: High strength (40Nm break away) general purpose adhesive for permanent threaded assemblies. Secures studs up to 13mm, sealing against leakage and corrosion. Chemical resistant while also resisting fuels, lubricants and most industrial liquids and gases. Display packed. VAT Rated At:20.00%Barcode:5010559246595Outer Box Qty20Weight0.108kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard..
€13.84 €22.45 Ex Tax: €11.25
Draper D3294 Plastic Weld
FEATURES: A toughened structural adhesive formulated for bonding differing substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load bearing and resistant to weathering, humidity and temperature variations. Display packed. VAT Rated At:20.00%Barcode:5010559246687Outer Box Qty20Weight0.084kgsSize28ml View product in our catalogue: Page 179 View more products in this category BRAND INFO:T..
€12.53 €20.22 Ex Tax: €10.18
Draper D515 Flexible Gasket
FEATURES: Easily applied flexible gasket paste, which forms a tough purple temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and shape creating an instant low pressure seal while removing the need for traditional paper or cork gaskets. Display packed. VAT Rated At:20.00%Barcode:5010559319084Outer Box Qty20Weight0.094kgsSize50ml View product in our catalogue: Page 179 View more products in this category BRAND INFO:The..
€13.62 €23.04 Ex Tax: €11.07
Draper D518 Flexible Gasket
FEATURES: Easily applied flexible gasket paste ideal for aluminium flanges forming a tough red, temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and shape creating an instant low pressure seal while removing the need for traditional paper or cork gaskets. Display packed. VAT Rated At:20.00%Barcode:5010559319091Outer Box Qty20Weight0.094kgsSize50ml View product in our catalogue: Page 179 View more products in this categor..
€13.62 €23.04 Ex Tax: €11.07
Draper D542 Hydraulic Seal
FEATURES: D542 for metal threaded fittings especially useful on hydraulic pipes. Used on low, medium and high-pressure lines and cures to form a tough high-pressure seal. Ideal for valves, threaded couplings and adaptors. Display packed. VAT Rated At:20.00%Barcode:5010559333219Outer Box Qty20Weight0.112kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and t..
€13.62 €23.04 Ex Tax: €11.07
Draper D572 Brake and Air Line Seal
FEATURES: Designed for sealing metal pipes and fittings. Product cures due to the absence of air between close fitting metal surfaces. Prevents loosening and leakage from shock and vibration. Good chemical/solvent resistance to ethanol, motor oil, unleaded petrol and brake fluid. Unique adhesion allows for re-alignment up to 60 hours after application. Display packed. VAT Rated At:20.00%Barcode:5010559246656Outer Box Qty20Weight0.096kgsSize50ml View product in our catalogue: Page 179..
€13.84 €22.42 Ex Tax: €11.25
Draper D574 Multi Gasket
FEATURES: Instant gasket material which forms in place, making almost any size and shape, replacing paper, cork etc. Once applied the assembled parts are usually suitable for immediate low pressure (6 bar) service and once cured can resist 350 bar pressure depending on gap size. Display packed. VAT Rated At:20.00%Barcode:5010559246618Outer Box Qty20Weight0.094kgsSize50ml View product in our catalogue: Page 179 View more products in this category BRAND INFO:The Draper range..
€16.16 €26.45 Ex Tax: €13.14
Draper D638 Bush and Sleeve Retainer
FEATURES: Designed to give high strength retention under cyclic loading. Retains full strength and won't suffer fatigue under load stress. Suited for structural components such as cylindrical parts under load, keys, splines, and structural tubing. Display packed. VAT Rated At:20.00%Barcode:5010559246670Outer Box Qty20Weight0.110kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard Draper product,..
€13.62 €23.04 Ex Tax: €11.07
Draper D641 Bearing Fit
FEATURES: Single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. Will secure all types and sizes of bearings, shafts and cylindrical parts. Display packed. VAT Rated At:20.00%Barcode:5010559246625Outer Box Qty20Weight0.110kgsSize50ml View product in our catalogue: Page 178 View more products in this category BRAND INFO:The Draper range is our standard Draper product, suitable for trades and the ..
€13.62 €23.04 Ex Tax: €11.07
Draper Damp Detector (34873)
Hand - held instrument for detecting rising and penetrating damp in foundation walls, floors and timbers. Also suitable for checking dryness of surfaces prior to papering or tiling and also that wood is dry before painting or varnishing. An Audible signals detects the presence of damp and humidity. Uses a PP3 battery (sold separately).For detecting rising and penetrating damp in foundation walls, floors and timbersSuitable for checking dryness of surfaces prior to papering or tiling and also tha..
€19.95 €48.89 Ex Tax: €16.22
