Special Offers
StrongHand® 11" Locking C-Clamp (Swivel Pads)
Made of forged, heat treated steel with nickel and chrome plating for strength and durability. Ergonomic release lever that won’t pinch.Made of heat treated steel and nickel/chrome plated for strength and durability. Updated features help you work quickly, safely and efficiently.Large adjustment screw with a hole for easy torque.Vinyl coated release handles made for comfort and ease.SpecificationOverall Length (in) 11Throat Depth (in) 3.3Max Clamping Capacity (in) 4.0Weight (lb) 2.2..
€14.95 €24.95 Ex Tax: €12.15
StrongHand® 6.5" Locking C-Clamp (Round Tip)
Made of forged, heat treated steel with nickel and chrome plating for strength and durability. Ergonomic release lever that won’t pinch.Made of heat treated steel and nickel/chrome plated for strength and durability. Updated features help you work quickly, safely and efficiently.Large adjustment screw with a hole for easy torque.Vinyl coated release handles made for comfort and ease.SpecificationOverall Length (in) 6.5Throat Depth (in) 1.8Max Clamping Capacity (in) 2.0Weight (lb) 0.5..
€12.95 €14.95 Ex Tax: €10.53
StrongHand® Corner Magnets Twin Pack 90º & 60º
Create 90º corners by holding from the outside, providing you with an unobstructed area for inside tack welds.One side corner “relief” provides clearance for tall lips.Use the outer edges of the Corner Magnet for setting up materials at 60º.Dimension (in) 3.3 x 3.8 x 0.6Max. Pull Force (lb) 30Weight (lb) 0.9..
€19.00 €34.95 Ex Tax: €15.45
StrongHand® Grasshopper Magnetic Welding Finger AGH230
Extremely versatile, the Stronghand Grasshopper Magnetic, is a seriously handy gadget to steady the work piece ready for welding. Sometimes referred to as a welders third hand, the magnetic grasshopper uses a magnetic base to fasten to the workbench or workpiece and a spring loaded arm to hold the component / part in place.The magnet is ideal for positional work too. It can be used to hold tabs and parts to be tacked in the vertical and overhead positions rather than just flat. Simpl..
€24.95 €36.24 Ex Tax: €20.29
StrongHand® Mini Magnet Squares (TWIN PACK)
Mini Magnets at just 2-5/16″ in height provide low profile holding of stock in tight, hard to reach areas.Use as many as needed for light duty holding of stock at multiple points.Insert a screwdriver into the center hole to apply breakaway force.Full aluminum rim enclosure for easy cleaning.SpecificationAngles 30º/60º, 45º, 90ºMax. Pull Force (lb) 25Dimensions (in) 2.3 x 2.0 x 0.6Weight (lb) 0.6Twin Pack..
€11.95 €16.47 Ex Tax: €9.72
StrongHand® NOMAD™ Economy Welding Table
Very Affordable. Fully Adjustable. Easily Movable.The Nomad Economy Welding Table is engineered to provide a safe, transportable, affordable, and versatile welding surface.Three 1.1″ (28mm) slots in the tabletop allow for insertion of clamps to reach any point on the table.Tabletop tilts to three positions: Horizontal, 30°, and folded for mobility.Two retractable, perpendicular steel guide rails can be used as guides, stops, or clamping edges.Tabletop height can be adjusted from 26″ to 32″ (660 ..
€199.00 €222.14 Ex Tax: €161.79
StrongHand® Pipe Pliers 11" Fixed Large V Pads
The convenient way to hold round or square tubes for butt-welding.Wide opening allows the Pipe Pliers to hold up to 2-1/2″ diameter pipes.Two V-Pads provide a better clamping surface.Adjustable top spindle for holding pipes of varying sizes.SpecificationTop V-Pad FixedBottom V-Pad FixedThroat Depth (in) 3.5MAX Clamping Capacity (in) 1.5 - 2.5Thread M10Overall Length (in) 11Weight (lb) 2.8 .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden..
€19.00 €26.95 Ex Tax: €15.45
StrongHand® Utility F-Clamp (165mm Capacity)
Utility Clamp with the Removable / Reversible Clamp Arm, set-up 10x faster than a C-Clamp!SpecificationCapacity - A (in) 6-1/2Throat Depth -B (in) 3-1/4Clamping Pressure (lb) 500Rail Size - C (in) 5/8 x 5/16Tapped Hole - D 5/16-18Weight (lb) 1.1..
€14.95 €21.20 Ex Tax: €12.15
Super Quality 1 'Long Life' Ceramic Flap Disc 4½ inch (115mm) Grit 40
Depressed centre. 115mm x 22.23mm Bore.Max 13300 rpm 80 m/sExcellent grinding & finishing - welding, rust removal, surface preparation, deburring, blending, paint removal & edge grinding.Very long lifetimePerfect adaptation to the workpiece surfaces guarantees clean grinding transitions..
€3.00 €6.00 Ex Tax: €2.44
Super Quality 1 'Long Life' INOX Flat Cutting Disc 4½" (115mm x 1.6mm x 22mm)
Cutting disc for Steel and Stainless Steel115mm x 1.6mm Skinny Disc 22mm Standard Bore EN12413 Max RPM 13,300Manufactured in the EU..
€2.79 €6.00 Ex Tax: €2.27
Super Quality 1 'Long Life' INOX Flat Cutting Disc 4½" (115mm x 1.6mm x 22mm) TIN OF 10
Cutting disc for Steel and Stainless Steel115mm x 1.6mm Skinny Disc 22mm Standard Bore EN12413 Max RPM 13,300Manufactured in the EUTIN OF 10..
€19.00 €25.00 Ex Tax: €15.45
Super Quality 1 'Long Life' Orange BOOST Flat Cutting Disc 9 Inch (230mm x 2.2mm x 22mm)
For cutting and fluting stainless steel tubes,steel plate,walled tubes. Fast cutting time. Long life. Very low formation of burrs. Very high accuracy. Working free of vibration. Extremely high efficiency. High performance.Super Quality: Orange Disc – Metal Cutting. The Super Quality Orange Disc lasts up to 5 times longer than it's nearest competitor. Suitable for cutting metal.230mm x 2.2mm x 22mmIn recent EWS tests, the nearest competitor disc, cutting 50mm Mild Steel pipe, performed 19 cut..
€6.95 €12.00 Ex Tax: €5.65
Super Quality 1 'Long Life' Orange Depressed Cutting Disc 9 Inch (230mm x 3.2mm x 22mm)
For cutting and fluting stainless steel tubes,steel plate,walled tubes. Fast cutting time. Long life. Very low formation of burrs. Very high accuracy. Working free of vibration. Extremely high efficiency. High performance.Super Quality: Orange Disc – Metal Cutting. The Super Quality Orange Disc lasts up to 5 times longer than it's nearest competitor. Suitable for cutting metal.230mm x 3.2mm x 22mmIn recent EWS tests, the nearest competitor disc, cutting 50mm Mild Steel pipe, performed 19 cut..
€8.49 €12.00 Ex Tax: €6.90
Super Quality 1 'Long Life' Orange Flat Cutting Disc 12 Inch (300mm x 3.6mm x 20mm)
Consaw Cutting DiscFor cutting and fluting stainless steel tubes,steel plate,walled tubes. Fast cutting time. Long life. Very low formation of burrs. Very high accuracy. Working free of vibration. Extremely high efficiency. High performance.Super Quality: Orange Disc – Metal Cutting. The Super Quality Orange Disc lasts up to 5 times longer than it's nearest competitor. Suitable for cutting metal.300mm x 3.6mm x 20mmMax RPM 5100/minEN12413A24ST - BF2/80In recent EWS tests, the nearest competi..
€10.49 €19.19 Ex Tax: €8.53
Super Quality 3 Depressed MILD STEEL Cutting Disc 4½" (115mm x 2.5mm x 22mm)
Disc Specification Cutting Disc for Mild Steel 115mm x 2.5mm Disc 22mm Standard Bore EN12413 Max RPM 13,300Single DiscManufactured in the EU..
€1.10 €1.59 Ex Tax: €0.89
Super Quality 3 Depressed MILD STEEL Cutting Disc 4½" (115mm x 2.5mm x 22mm) - PACK OF 25
Disc Specification Cutting Disc for Mild Steel 115mm x 2.5mm Disc 22mm Standard Bore EN12413 Max RPM 13,300Pack of 25Manufactured in the EU..
€21.95 €39.67 Ex Tax: €17.85
Super Quality 3 Depressed MILD STEEL Cutting Disc 9 Inch (230mm x 3.2mm x 22mm)
Disc Specification Cutting Disc for Mild Steel 230mm x 3.2mm Disc 22mm Standard Bore EN12413 Max RPM 6,650Manufactured in the EU..
€1.90 €4.31 Ex Tax: €1.54
Super Quality 3 Depressed MILD STEEL Cutting Disc 9" (230mm x 3.2mm x 22mm) - PACK OF 25
Disc Specification Cutting Disc for Mild Steel 230mm x 3.2mm Disc 22mm Standard Bore EN12413 Max RPM 6,650Pack of 25Manufactured in the EU..
€43.49 €59.04 Ex Tax: €35.36
Super Quality 3 Depressed STEEL Grinding Disc 4½" (115mm x 6.5mm x 22mm)
Disc Specification Grinding Disc for Mild Steel 115mm x 6.5mm Disc 22mm Standard Bore EN12413 Max RPM 13,300Single DiscManufactured in the EU..
€1.70 €2.83 Ex Tax: €1.38
Super Quality 3 Depressed STEEL Grinding Disc 4½" (115mm x 6.5mm x 22mm) - PACK OF 10
Disc Specification Grinding Disc for Mild Steel 115mm x 6.5mm Disc 22mm Standard Bore EN12413 Max RPM 13,300Pack of 10Manufactured in the EU..
€16.00 €35.55 Ex Tax: €13.01
Super Quality 3 Depressed STEEL Grinding Disc 9" (230mm x 6.5mm x 22mm)
Disc Specification Grinding Disc for Mild Steel 230mm x 6.5mm Disc 22mm Standard Bore EN12413 Max RPM 6,650Single DiscManufactured in the EU..
€3.80 €4.43 Ex Tax: €3.09
Super Quality 3 Depressed STEEL Grinding Disc 9" (230mm x 6.5mm x 22mm) - PACK OF 10
Disc Specification Grinding Disc for Mild Steel 230mm x 6.5mm Disc 22mm Standard Bore EN12413 Max RPM 6,650Pack of 10Manufactued in the EU..
€33.91 €55.35 Ex Tax: €27.57
Super Quality 3 Depressed STONE Cutting Disc 9" (230mm x 3.2mm x 22mm)
Disc Specification Cutting Disc for Stone230mm x 3.2mm Disc 22mm Standard Bore A30T-BF42Max RPM 6,650 80 m/sSingle DiscManufactured in the EU..
€1.50 €4.00 Ex Tax: €1.22
Super Quality 3 Flat 100 x Stainless Steel Cutting Disc 4½" plus FREE BGS Technic Quick Release Nut
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations.A great value abrasive bundle which includes:100 x Super Quality 3 INOX Flat Cutting Disc 4½" (115mm x 1.0mm x 22mm1 x FREE BGS Technic Quick Release Nut | For Angle Grinder | M14 (RRP List price €20) Quick Release Nut Specificationfor quick and toolless changingto be used only with cutting and grinding discsfor standard an..
€79.00 €117.99 Ex Tax: €64.23
Super Quality 3 Flat 50 x Stainless Steel Cutting Disc 9" plus FREE BGS Technic Quick Release Nut
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations.A great value abrasive bundle which includes:50 x Super Quality 3 INOX Flat Cutting Disc 9" (230mm x 1.9mm x 22mm1 x FREE BGS Technic Quick Release Nut | For Angle Grinder | M14 (RRP List price €25) Quick Release Nut Specificationfor quick and toolless changingto be used only with cutting and grinding discsfor standard angle grinders..
€95.00 €135.30 Ex Tax: €77.24
Super Quality 3 Flat Stainless Steel Cutting Disc 4½ Inch (115mm x 1.0mm x 22mm) - Single Disc
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations. Cutting disc for Steel and Stainless Steel115mm x 1.0mmSkinny Disc22mm Standard BoreEN12413Max RPM 13,300Pack of 25Manufactured in the EU..
€0.79 €1.60 Ex Tax: €0.64
Super Quality 3 Flat Stainless Steel Cutting Disc 4½ Inch (115mm x 1.0mm x 22mm) PACK OF 25
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations. Cutting disc for Steel and Stainless Steel115mm x 1.0mmSkinny Disc22mm Standard BoreEN12413Max RPM 13,300Pack of 25Manufactured in the EU..
€20.00 €24.00 Ex Tax: €16.26
Super Quality 3 Flat Stainless Steel Cutting Disc 9 Inch (230mm x 1.9mm x 22mm)
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations. Cutting disc for Steel and Stainless Steel230mm x 1.9mmSkinny Disc22mm Standard BoreEN12413Max RPM 6,650Pack of 25Manufactured in the EU..
€2.39 €3.94 Ex Tax: €1.94
Super Quality 3 Flat Stainless Steel Cutting Disc 9 Inch (230mm x 1.9mm x 22mm) PACK OF 25
The Super Quality 3 range of thin metal cutting discs are the ideal choice when cutting stainless or other metal. Thin blade for cleaner cuts & less vibrations. Cutting disc for Steel and Stainless Steel230mm x 1.9mmSkinny Disc22mm Standard BoreEN12413Max RPM 6,650Pack of 25Manufactured in the EU..
€46.95 €60.15 Ex Tax: €38.17
Super Quality 3 Steel Flat Cutting Consaw Disc 12 Inch (300mm x 3.5mm x 20mm) PACK OF 25
Enhance your cutting efficiency with the Super Quality 3 Steel Flat Cutting Disc, specifically designed for superior performance on steel. This set of 50 high-performance discs is exceptional value, ideal for both professional and industrial use.Key Features:Size: 300mm diameter with a thickness of 3.5mm, perfect for precise and smooth cutting of steel materials.Standard Bore: 20mm bore fits standard machines, ensuring compatibility and easy installation.High Standards: Certified to meet EN12413..
€39.00 €73.19 Ex Tax: €31.71
