Special Offers
Draper COB/SMD LED Rechargeable Inspection Lamp, 7W, 700 Lumens, Orange, 1 x USB Cable Supplied (11761)
7W COB inspection lamp with four light setting, a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hook on the back and also fitted with three high power magnets for hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.COB LED lamp with SMD LED torch180º pivoting headMagnetic base and hookMicro USB charging inputPower indicatorSupplied..
€33.00 €126.08 Ex Tax: €26.83
Draper COB/SMD LED Rechargeable Inspection Lamp, 7W, 700 Lumens, Yellow, 1 x USB Cable Supplied (11762)
7W COB inspection lamp with four light setting, a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hook on the back and also fitted with three high power magnets for hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.COB LED lamp with SMD LED torch180º pivoting headMagnetic base and hookMicro USB charging inputPower indicatorSupplied..
€29.00 €126.08 Ex Tax: €23.58
Draper COB/SMD LED Rechargeable Slimline Inspection Lamp, 3W, 170 Lumens, Green, 1 x USB Cable Supplied (11856)
3W COB inspection lamp with high and low 2 light settings producing 170 lumen output and an SMD LED torch on the tip. Charged via a micro USB cable. Manufactured from shock-resistant plastic and fitted with adouble pivot enabling the lamp to be folded flat or used at any angle and fitted with amagnetic base for hands-free operation. Supplied with a micro USB to USB cable.Pivoting headCOB LED with SMD LED torchPower indicator & micro USB charging inputMagnetic base & hook..
€12.95 €27.60 Ex Tax: €10.53
Draper COB/SMD LED Slimline Inspection Lamp, 7W, 70 - 700 Lumens, Green, 1 x USB Cable Supplied (98346)
7W, COB LED inspection lamp with an SMD LED torch built into the pivoting and swivelling head allowing the light to be used in any 360° position. Fitted with a dimming function delivering a light output of between 70 and 700 lumens, a power indicator, a convenient magnetic base and a hook for hands-free use. Supplied with a USB- C to USB-A cable, just plug into any USB-A charger for up to 15 hours of continuous use with a four-hour charging time (depending on the charger unit).Pivoting and swive..
€59.00 €133.75 Ex Tax: €47.97
Draper Coil Spring Compressor Set (2 Piece)
FEATURES:Hardened and tempered coil spring compressors. The 'Wrap-Over' claw design delivers an increased safety jaw capacity of 95-235mm, Hex size 21mm with a Hex drive of 1/2" and an M16 threaded bar that's applied with a chemically blacked finish.VAT Rated At: 20.00%Barcode: 5010559852147Outer Box Qty 10Weight 1.608kgs..
€36.68 €64.58 Ex Tax: €29.82
Draper Cold Chisel And Punch Set (12 Piece)
FEATURES:Chrome vanadium steel hardened and tempered with a chemically blacked finish and plastic grips. Supplied in storage roll. Display packed.Contents4 x cold chisels: 13 x 150, 16 x 180, 19 x 190, 22 x 205mm1 x taper punch: 5 x 255mm2 x parallel pin punches: 4 and 6 x 150mm2 x parallel taper pin punches: 3 and 6 x 150mm1 x centre punch: 6 x 150mm1 x point chisel: 150mm long1 x cross cut chisel: 150mm long..
€50.71 €93.41 Ex Tax: €41.23
Draper Collet Set MT3-M12 Dia. 4-16mm
Draper Collet Set MT3-M12 Dia. 4-16mm..
€268.45 €542.74 Ex Tax: €218.25
Draper Combi Brush for SWD1100A
FEATURES:Draper Combi Brush for SWD1100A..
€49.93 €73.96 Ex Tax: €40.59
Draper Combination Lock Wall-Mounted Key Box
FEATURES:This durable, weather-resistant aluminium key box is wall mountable and has a four-digit combination lock. It’s ideal for the secure storage of house or padlock keys and other small valuables, and the combination can be set to a chosen code and reset when needed. It comes supplied with a wall-mounting kit.CONTENTS:1 x Combination Lock Wall-Mounted Key Box..
€25.68 €41.98 Ex Tax: €20.88
Draper Combination Roller Cabinet and Tool Chest, 15 Drawer, 26", 680 x 458 x 1322mm (11533)
Fifteen drawer combined roller cabinet and tool chest. Attached with braked and swivelling castors and pulling handles for easy manoeuvrability. Manufactured from sheet steel with a protective powder coated finish. Drawers are fitted with ball bearing runners delivering a smooth operation and a secure locking system with two keys on pallet.15 drawer combined cabinet and tool chestBraked and swivelling castorsManufactured from sheet steelProtective powder coated finishBall bearing runners deliver..
€499.00 €877.84 Ex Tax: €405.69
Draper Combination Roller Cabinet and Tool Chest, 16 Drawer, 26" (11541)
Sixteen drawer combined roller cabinet and tool chest. Attached with braked and swivelling castors and pulling handles for easy manoeuvrability. Manufactured from sheet steel with a protective powder coated finish. Drawers are fitted with ball bearing runners delivering a smooth operation and a secure locking system with two keys on pallet.16 drawer combined cabinet and tool chestBraked and swivelling castorsManufactured from sheet steelProtective powder coated finishBall bearing runners deliver..
€599.00 €1,066.95 Ex Tax: €486.99
Draper Combined MM/AF Socket Set, 1/2" Sq. Dr. (41 Piece) (82136)
Manufactured and tested generally in accordance with DIN3122 and ISO3315 SpecificationsSix point sockets made from chrome vanadium steel that’s hardened and tempered with a micro satin finish. Supplied with a 72 tooth reversible soft grip ratchet and accessories. Packed in a tough plastic storage case.Contents:16 metric sockets size 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32mm10 imperial sockets size 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 5/16, 1"..
€69.00 €163.75 Ex Tax: €56.10
Draper Combined Roller Cabinet and Tool Chest, 15 Drawer, 26", Black (04594)
Fifteen drawer combined roller cabinet and tool chest. Attached with braked and swivelling castors and pulling handle for easy manoeuvrability. Manufactured from sheet steel with a protective powder coated finish. Drawers are fitted with ball bearing runners delivering a smooth operation and a secure locking system with two keys. Carton packed on pallet.15 drawer combined cabinet and tool chestBraked and swivelling castorsManufactured from sheet steelProtective powder coated finishBall bearing r..
€629.00 €1,062.34 Ex Tax: €511.38
Draper Combined Roller Cabinet and Tool Chest, 19 Drawer, 40" (17764)
Nineteen drawer combined roller cabinet and tool chest. Attached with two fixed and two braked, heavy duty swivelling castors a pulling handle and carry handles. Manufactured from sheet steel with a powder coated finish. Drawers are fitted with ball bearing runners for smoother operation and a protective foam liner. Each roller cabinet is fitted with a secure integral locking system Supplied with two keys.19 drawer combined roller cabinet and tool chestTwo fixed and two braked heavy-duty swivell..
€999.00 €1,434.49 Ex Tax: €812.20
Draper Combined Roller Cabinet and Tool Chest, 6 Drawer, 24" (30680)
This workshop and garage storage solution features a tool chest with two drawers and two cupboards, as well as a roller cabinet with four drawers. They can be used individually or combined to suit the task at hand. Both are constructed from sheet steel and have a protective powder coated finish that guards against scratches and corrosion. The spacious drawers have a stylish silver trim and are equipped with ball bearing sliders for smooth operation, along with a 2mm EVA liner to protect tools an..
€179.00 €249.85 Ex Tax: €145.53
Draper Combined Roller Cabinet and Tool Chest, 8 Drawer, 24" (30681)
This workshop and garage storage solution features a tool chest with six drawers and lift-up top, as well as a roller cabinet with two drawers and one cupboard. They can be used individually or combined to suit the task at hand. Both are constructed from sheet steel and have a protective powder coated finish that guards against scratches and corrosion. The spacious drawers have a stylish silver trim and are equipped with ball bearing sliders for smooth operation, along with a 2mm EVA liner to pr..
€209.00 €269.06 Ex Tax: €169.92
Draper Combined Roller Cabinet, Mid Tool Chest and Tool Chest, 14 Drawers, 26" (29455)
This workshop and garage storage solution features a mid tool chest with two drawers and a tool chest with five drawers and lift-up top, as well as a roller cabinet with 7 drawers. They can be used individually or combined to suit the task at hand. Both are constructed from sheet steel and have a protective powder coated finish that guards against scratches and corrosion. The spacious drawers have a stylish silver trim and are equipped with ball bearing sliders for smooth operation, along with a..
€679.00 €830.18 Ex Tax: €552.03
Draper Compact Trolley Jack With Carry Case, 2 Tonne (54635)
This compact trolley jack is portable and ideal for light duty lifting from 130-330mm. Quick to assemble and easily operated using the one-piece handle. It is fitted with rear swivelling castors for manoeuvrability. There is a safety valve to prevent the jack from overloading. Supplied inside a robust plastic storage case with carry handle.Compact and portable designLifting range 130-330mmOne-piece handleFitted with rear swiveling castorsSafety overload protectionSupplied inside a robust plastic..
€59.00 €83.03 Ex Tax: €47.97
Draper Concrete Saw - 650mm
FEATURES:This handsaw is ideal for cutting cellular concrete blocks and soft stone, thanks to its specially designed carbon steel alloy blade. The blade is Teflon® coated to enhance its performance. The comfortable TPR soft grip handle features 90° and 45° angle markings for precision cutting. Plus, there is a hang hole towards the end of the blade to make storage easier.Length 650mmTeeth 1.4tpiSPECIFICATION:Material: 50 Carbon steelBlade thickness: 1.5mmTeeth: 34 YG8 alloyTeeth per Inch: 1.4tpi..
€31.51 €55.12 Ex Tax: €25.62
Draper Continuous Diamond Blade (110mm)
FEATURES:Hardened and tempered diamond blade with continuous rim to provide a smooth cutting finish. Designed for use on ceramic and natural stone tiles. Suitable for dry and wet cutting, with optimum results when used wet. Compatible with most angle grinders and tile cutting machines with a 22.23mm bore.SPECIFICATION:Diameter 110mmBore size 22.23mmSegment height 7mmMaximum speed 13,800rpmKerf 1.8mmBlade construction SinteredWeight 0.073kg..
€5.46 €6.77 Ex Tax: €4.44
Draper Continuous Diamond Blade (115mm)
FEATURES:Hardened and tempered diamond blade with continuous rim to provide a smooth cutting finish. Designed for use on ceramic and natural stone tiles. Suitable for dry and wet cutting, with optimum results when used wet. Compatible with most angle grinders and tile cutting machines with a 22.23mm bore.SPECIFICATION:Diameter 115mmBore size 22.23mmSegment height 7mmMaximum speed 13,300rpmKerf 1.9mmBlade construction SinteredWeight..
€6.35 €7.92 Ex Tax: €5.16
Draper Continuous Diamond Blade (180mm)
FEATURES:Hardened and tempered diamond blade with continuous rim to provide a smooth cutting finish. Designed for use on ceramic and natural stone tiles. Suitable for dry and wet cutting, with optimum results when used wet. Compatible with most angle grinders and tile cutting machines with a 22.23mm bore.SPECIFICATION:Diameter 180mmBore size 22.23mmSegment height 7mmMaximum speed 8,500rpmKerf 2.3mmBlade construction SinteredWeight 0.3kg..
€11.04 €15.99 Ex Tax: €8.98
Draper Continuous Diamond Blade (200mm)
FEATURES:Hardened and tempered diamond blade with continuous rim to provide a smooth cutting finish. Designed for use on ceramic and natural stone tiles. Suitable for dry and wet cutting, with optimum results when used wet. Compatible with most tile cutting machines with a 25.40mm bore.SPECIFICATION:Diameter 200mmBore size 25.40mmSegment height 7mmMaximum speed 7,650rpmKerf 2.3mmBlade construction SinteredWeight 0.39kg..
€13.80 €20.06 Ex Tax: €11.22
Draper Coolant and Fuel Pipe Pliers Set (3 Piece) (28625)
This set of coolant and fuel line disconnect pliers is designed to uncouple quick release fittings commonly found on most vehicles. They are made from high-quality carbon steel and have vinyl grips for better control. The set includes three types of jaw - blue for 8mm x 1/4" and 5/16"; green for 10mm x 3/8"; and red for special applications.Designed for uncoupling quick release fittings on most fuel lines and hosesHigh-quality carbon steel with vinyl gripsThree jaw types - blue 8mm x 1/4" and 5/..
€24.95 €39.21 Ex Tax: €20.28
Draper Corner Clamp
FEATURES:This 90° clamp has independently adjustable jaws to hold material of equal or varying thickness. Mounting holes allow clamp to be securely attached to a work surface. Made from cast aluminium with a powder coated finish for long lasting durability.Capacity 75mmClamp Type CornerSPECIFICATION:Capacity: 75mmCONTENTS:1 x Corner Clamp..
€11.29 €16.15 Ex Tax: €9.18
Draper Corner Clamp (Pack of 2)
FEATURES:This 90° clamp is for corner and T-butt joints and is suitable for boards 10-22mm thick. Boards of differing thickness can also be clamped together. Strong nylon plastic construction with sliding clamp section. The spring mechanism automatically adapts to the board thickness. There is a soft, non-slip contact surface, for fastening the workpiece firmly in place without making pressure marks.Clamp Type CornerPack Size 2CONTENTS:1 x Corner Clamps (Pack of 2)..
€13.05 €18.99 Ex Tax: €10.61
Draper Countersink Bit Set (3 Piece)
FEATURES:Heavy-duty countersink manufactured from alloy steel with five flutes and a 90° head. For countersinking screw holes for flush fitting of screwheads in soft metals, hardwood, soft wood and plastics. Fitted with quick change 1/4" hex. shank. Compatible with drills with a standard 10/13mm chuck.CONTENTS:Countersink Bit Set (3 Piece)..
€14.55 €20.91 Ex Tax: €11.83
Draper Countersink Bit Set (5 Piece)
FEATURES:This set pilot drills and countersinks at the same time, producing a faster finish. Heavy-duty design manufactured from carbon steel C45. Replaceable drill bits manufactured from high-speed steel. Drill bits can be adjusted and fastened with a hex set screw. For countersinking screw holes for flush fitting of screwheads in hardwood, soft wood and plastics. Fitted with quick change 1/4" hex. shank. Compatible with drills with a standard 10/13mm chuck.CONTENTS:Countersink Bit Set (5 Piece..
€18.60 €30.68 Ex Tax: €15.12
Draper Course Polishing Sponge (150mm)
FEATURES:Polishing sponges for use with hook and loop backing pads. Designed for polishing, cutting and restoring paintwork...
€7.38 €16.27 Ex Tax: €6.00
Draper Course Polishing Sponge (180mm)
FEATURES:Polishing sponges for use with hook and loop backing pads. Designed for polishing, cutting and restoring paintwork...
€5.88 €14.28 Ex Tax: €4.78
