Special Offers
Draper T50 Tx-star® Impact Screwdriver Bit
FEATURES:8mm hexagon shank bits suitable for use with Stock Nos. 22322 and 81519 Impact Screwdriver Sets. Sold loose.PZ TYPE bits are compatible with *Pozidriv®/Supadriv® fixing systems.Draper TX-STAR products are compatible with †Torx fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc.†Torx is the registered trademark of Acument Intellectual Properties LLC...
€7.28 €9.15 Ex Tax: €5.92
Draper 'Impact Resistant' Measuring Tape (5m/16ft)
FEATURES:Manufactured to EC Class II AccuracyTough impact resistant ABS cases with soft grip, blade locking buttons on the side and base. The hold and measure buttons allow the user to lock the tape for accurate measurements with the button on base to control speed of return. The nylon coated, matt finished steel blade is marked with clear black and red graduations in metres into cm/mm and feet into inches, 1/8" and 1/16" and stud centre markings every 16". Self-aligning end hook for very accura..
€7.65 €11.23 Ex Tax: €6.22
Draper 'pound Thru' Pz Type No.1 Screwdriver
FEATURES:Screwdrivers with tanged blades preventing them from turning in the handle. Attached with a firmly rooted striking cap, allowing the handle to be struck without damage. Made from chrome vanadium steel that's hardened, tempered and satin chrome plated with a *magnetic tip. The 'soft grip' handle delivers greater user comfort. Display packed.PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc.Blade Length 7..
€2.93 €10.92 Ex Tax: €2.38
Draper 'Pound Thru' Pz Type No.2 Screwdriver
FEATURES:Extra long 450mm screwdrivers. The tanged blades prevent turning in the handle. Attached with a firmly rooted striking cap, allowing the handle to be struck without damage. Made from chrome vanadium steel that's hardened, tempered and satin chrome plated with a magnetic tip. The 'soft grip' handle delivers greater user comfort...
€6.64 €19.22 Ex Tax: €5.40
Draper 'Pound Thru' Pz Type No.3 Screwdriver
FEATURES:Screwdrivers with tanged blades preventing them from turning in the handle. Attached with a firmly rooted striking cap, allowing the handle to be struck without damage. Made from chrome vanadium steel that's hardened, tempered and satin chrome plated with a *magnetic tip. The 'soft grip' handle delivers greater user comfort. Display packed.PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc...
€4.43 €15.76 Ex Tax: €3.60
Draper 'Pound Thru' Soft Grip Pry Bar Set With Hand Guard (4 Piece)
Manufactured from hardened and tempered chrome vanadium steel. These pry bars have a shock-resistant soft grip handle for increased user-comfort. The ends are fitted with striking caps for hammer-through action. The curved blades provide greater leverage and have a blackened finish for added corrosion protection. Supplied with protective caps for the blade tips.Manufactured from hardened and tempered chrome vanadium steelShock-resistant soft grip handles for increased user-comfortFitted with str..
€26.90 €43.82 Ex Tax: €21.87
Draper 0.6mm MB15 MIG Torch Tips (Pack of 5)
FEATURES:Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5...
€5.46 €6.77 Ex Tax: €4.44
Draper 0.6mm Mild Steel MIG Wire - 15kg
FEATURES:Manufactured to EN440 G3Sil (BS2901:A18)Copper coated mild steel MIG wire, on spools, for welding mild and medium tensile steel. For impact toughness down to -20�. For use with Draper MIG welders and other manufacturers similar machines. Manufactured by SIF for Draper Tools. Carton packed.Diameter: 0.6mmWeight: 15.0kg..
€79.69 €203.95 Ex Tax: €64.79
-228x228.jpg "Draper 0.6mm Mild Steel MIG Wire - 5kg")
Draper 0.6mm Mild Steel MIG Wire - 5kg
FEATURES:Manufactured to EN440 G3Sil (BS2901:A18)Copper coated mild steel MIG wire, on spools, for welding mild and medium tensile steel. For impact toughness down to -20�. For use with Draper MIG welders and other manufacturers similar machines. Manufactured by SIF for Draper Tools. Carton packed.Diameter: 0.6mmWeight: 5.0kg..
€50.63 €88.79 Ex Tax: €41.16
Draper 0.8mm Flux Cored MIG Welding Wire (450g)
FEATURES:Made from mild steel. Flux cored 0.8mm gasless wire supplied as a spool. Low alloy self-shielding wire. Suitable for use with most MIG welders.SPECIFICATION:1 x Flux Cored MIG Welding Wire..
€14.18 €20.37 Ex Tax: €11.53
Draper 0.8mm Flux Cored MIG Welding Wire (5kg)
FEATURES:Made from mild steel. Flux cored 0.8mm gasless wire supplied as a spool. Low alloy self-shielding wire. Suitable for use with most MIG welders.SPECIFICATION:1 x Flux Cored MIG Welding Wire..
€123.44 €222.17 Ex Tax: €100.36
Draper 0.8mm Lightweight Oxy Acetylene Cutting Nozzles for Mild Steel
FEATURES:For use with torches for cutting mild steel. Carton packed...
€8.78 €19.29 Ex Tax: €7.14
Draper 0.8mm MB15 MIG Torch Tips (Pack of 5)
FEATURES:Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5...
€5.46 €6.77 Ex Tax: €4.44
Draper 1 Tonne Scissor Jack
FEATURES:Manufactured to EN1494 Specification1 Tonne mechanical scissor jack, with a compact design for easy storage. Integrated rubber saddle prevents damage to the underside of vehicles. Supplied with a winding handle.SPECIFICATION:Capacity: 1 Tonne (1000kg)Lifting range: 200-370mmSaddle size: 50-36mmHandle length: 410mmNett weight: 2.3kg..
€30.98 €35.74 Ex Tax: €25.19
Draper 1.2mm-3/64" Propane Cutting Nozzle
FEATURES:Brass nozzle with chrome outer. Carton packed.Bore: 3/64"For: Propane Thickness: 5-12mm..
€11.04 €16.15 Ex Tax: €8.98
Draper 1.4m Guide Rail for Draper Plunge Saw
FEATURES:This 1.4m guide rail, fitted with anti-slip grip, can be used in isolation or for longer cuts, joined to existing rails with the included connector clip. Designed to increase versatility when replacing or adding to the rails supplied with Draper 1200W Plunge Saw (Stock No. 57341).Size 1.4mSPECIFICATION:Length: 1.4mCONTENTS:1 x Guide Rail for Draper Plunge Saw, 1.4m..
€34.95 €59.20 Ex Tax: €28.41
Draper 1.5 Tonne Scissor Jack
FEATURES:Manufactured to EN1494 Specification1.5 Tonne mechanical scissor jack, with a compact design for easy storage. Integrated rubber saddle prevents damage to the underside of vehicles. Supplied with a winding handle.Capacity: 1.5TRange: 230-390mmSPECIFICATION:Capacity: 1.5 Tonne (1500kg)L..
€33.05 €38.06 Ex Tax: €26.87
Draper 1.5mm 1/4" Hex Hexagonal Insert Bit 50mm Long X 2
FEATURES:Chrome vanadium steel hardened, tempered with shot blast finish. Supplied in 1 or 2's. Display packed.Length: 50mmQuantity: 2Size: 1.5mm..
€2.36 €3.38 Ex Tax: €1.92
Draper 1.6mm Lightweight Oxy Acetylene Cutting Nozzles For Mild Steel
FEATURES:For use with torches for cutting mild steel. Carton packed...
€8.78 €19.29 Ex Tax: €7.14
Draper 1.6mm x 150mm Ceriated Tungsten Electrodes (Pack of 10)
FEATURES:Durable 2% ceriated tungsten electrodes 1.6mm x 150mm. Fine grain structure and annealing helps make them resistant to splitting and weld contamination. Suitable for AD and DC currents and ferrous/non-ferrous welding. Thorium free. Pack of 10...
€16.83 €27.13 Ex Tax: €13.68
Draper 1.6mm x 150mm Thoriated Tungsten Electrode
FEATURES:Colour coded spare electrodes for tig welders. Each has its own unique colour band helping identify which application they are used for. Packed in polybag.CONTENTS:10 x BV2..
€2.21 €4.22 Ex Tax: €1.80
Draper 1.6mm x 150mm Thoriated Tungsten Electrodes (Pack of 10)
FEATURES:Durable 2% thoriated tungsten electrodes 1.6mm x 150mm. Fine grain structure and annealing helps make them resistant to splitting and weld contamination. Suitable for DC currents and ferrous welding. Thorium free. Pack of 10...
€16.83 €27.13 Ex Tax: €13.68
Draper 1.6mm x 150mm Zirconiated Tungsten Electrode
FEATURES:Colour coded spare electrodes for tig welders. Each has its own unique colour band helping identify which application they are used for. Packed in polybag.CONTENTS:10 x BV2..
€2.21 €4.35 Ex Tax: €1.80
Draper 1.6mm-1/16" Propane Cutting Nozzle
FEATURES:Brass nozzle with chrome outer. Carton packed.Bore: 1/16"For: PropaneThickness: 10-75mm..
€11.04 €16.15 Ex Tax: €8.98
Draper 1/16" Acetylene Cutting Nozzle
FEATURES:For general purpose hand cutting. Carton packed.Bore: 1/16"For: Oxy AcetyleneThickness: 10-75mm..
€11.04 €16.15 Ex Tax: €8.98
Draper 1/2 BSP Female Thread Air Line Coupling
FEATURES:Designed for machine applications with high airflow demands. BSP taper. Maximum airflow rate 3420L/min (120cfm) at 6.9bar (100psi). Maximum working pressure 20.7bar (300psi). Display packed.Thread 1/2"Type Female..
€50.52 €87.33 Ex Tax: €41.08
Draper 1/2 BSP Male Thread Air Line Coupling
FEATURES:Designed for machine applications with high airflow demands. BSP taper. Maximum airflow rate 3420L/min (120cfm) at 6.9bar (100psi). Maximum working pressure 20.7bar (300psi). Display packed.Thread: 1/2"Type: Male..
€50.52 €87.33 Ex Tax: €41.08
Draper 1/2 inch Sq. Dr. Metric Impact Socket Set 83092 (10 Piece)
Socket forged from chrome vanadium steel hardened, tempered and chemically blackened for corrosion protection. Hole for accessory spring loaded ball. Packed in a plastic storage case.Contents: 10, 12, 13, 14, 15, 17, 19, 22, 24, 27mmChrome vanadium steel hardened, tempered and chemically blackened for corrosion protectionSafety Note: ONLY impact sockets and accessories can be used with air or electric powered wrenches. NEVER use silver chrome vanadium steel sockets which can shatter and cause pe..
€24.95 €34.37 Ex Tax: €20.28
Draper 1/2 Sanding Sheets with Hook and Loop, 115 x 230mm, 240 Grit (Pack of 10) (55865)
This pack of 1/2 sanding sheets (115 x 230mm) of 240 grit are made from premium quality aluminium oxide that is resin bonded to provide improved grain adhesion, anti-static qualities and long-lasting performance. The heavy duty E-Weight backing paper makes the sanding sheet more durable - able to withstand the toughest jobs. The hook and loop backing offers decent adhesion to facilitate the fast changing of sanding sheets. The 14 pre-punched 8mm holes improve dust extraction. Ideal for sanding a..
€7.53 €9.08 Ex Tax: €6.12
Draper 1/2 Sanding Sheets with Hook and Loop, 115 x 230mm, 80 Grit (Pack of 10) (55863)
This pack of 1/2 sanding sheets (115 x 230mm) of 80 grit are made from premium quality aluminium oxide that is resin bonded to provide improved grain adhesion, anti-static qualities and long-lasting performance. The heavy duty E-Weight backing paper makes the sanding sheet more durable - able to withstand the toughest jobs. The hook and loop backing offers decent adhesion to facilitate the fast changing of sanding sheets. The 14 pre-punched 8mm holes improve dust extraction. Ideal for sanding an..
€7.53 €9.08 Ex Tax: €6.12
