Special Offers
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Opel / Vauxhall 1.6 SIDI
for checking and setting the engine timing when replacing the timing chainsuitable for following Opel / Vauxhall models:Cascada, Astra J, Zafira C, Insignia (2013-2016)engines:SIDI, SIDI Turbo, SIDI Turbo EcoFLEXengine codes:LVP/A16XHT, LWC/A16SHT, LVP/B16XHT, LWC/B16SHT, LWC/A16SHLscope of delivery:camshaft alignment tool, to be used as OEM EN-51148crankshaft pulley holding tool, to be used as OEM EN-51147balance shaft sprocket locking tools, to be used as OEM EN-51153chain tensioner locking pi..
€249.25 €318.19 Ex Tax: €202.64
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Opel 1.0, 1.4 L Petrol Engines
for checking and setting the engine timingsuitable for Opel 1.0 / 1.4 L petrol engines with turbocharger and 1.4 L naturally aspirated petrol enginessuitable for Opel 1.0 L 3-cylinder turbo engines (LE1/B10XFL, LE1/B10XFT, LE1/B10XHL), 1.4 L 4-cylinder naturally aspirated engines (LV7/B14XE) and 1.4 L 4-cylinder turbo engines (LE2/B14XHL, LE2/B14XHT), built in e. g. Opel / Vauxhall Adam, Adam Rocks, Astra K, Corsa E (2014-2017) Turbo / SIDI / Ecoflexscope of delivery:camshaft alignment tool (1),..
€127.13 €140.55 Ex Tax: €103.36
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Porsche 911 (996, 997)
to check and adjust the camshaft timingis required when renewing the cylinder head gasket, changing the camshaft, etc.scope of delivery:1 camshaft holding tool, suitable for engine M96/03, to be used as OEM 96851 camshaft locking tool, suitable for engines M97/01 & M96/03, to be used as OEM 96862 locking pins, suitable for engines M97/01 & M96/03, to be used as OEM 9595 / 9595/1 Width 189 mm Gross weight 916 g Height 32 mm ..
€156.46 €201.68 Ex Tax: €127.20
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Porsche Panamera, Cayenne V8 | 8 pcs.
to check and adjust the camshaft timingis required when changing the cylinder head gasket, replacing the camshaft, etc.scope of delivery:camshaft gauges suitable for Panamera / Cayenne as of 2008, to be used as OEM 9678/1camshaft gauges suitable for Cayenne, to be used as OEM 9678auxiliary chain tensioner suitable for Cayenne as of 2008, to be used as OEM 9683/127 mm socket, 10 mm (3/8") drive, 30 mm length, suitable for Cayenne, to be used as OEM 9714crankshaft aligning tool, to be used as OEM ..
€299.43 €352.74 Ex Tax: €243.44
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for VAG 2.0 TDI Common Rail
for checking and setting the engine timingsuitable for following vehicle models:Audi A3 2.0L TDI (8V), engine code CRUA, (2015)VW Beetle 2.0L TDI, engine code CVCA (2015)VW Golf 2.0L TDI, engine code CRUA (2015)VW Jetta 2.0L TDI (EA288), engine code CVCA (2015)VW Passat 2.0L TDI (NMS Chassis), engine code CVCA (2015)scope of delivery:crankshaft locking tool, to be used as OEM T10490tooth belt tensioner locking pin, to be used as OEM T10115camshaft counterholder, to be used as VAG OEM T10172high ..
€137.37 €147.59 Ex Tax: €111.68
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for VAG 2.8, 3.0 TFSi
for checking and setting the engine timingsuitable for Audi 2.8 / 3.0 TFSi, petrol direct injection engines in Audi A6 as of 2005scope of delivery:crankshaft locking pin, to be used as OEM T40069camshaft adjusting tool, to be used as OEM T40133chain tensioner locking tool, to be used as OEM T40071camshaft adjuster pre-tensioning tool, to be used as OEM T10172bolts for pre-tensioning tool (4 pcs.), to be used as OEM T10172/2two-pin wrench, to be used as OEM 3212crankshaft pulley bolt adaptor, to ..
€194.83 €215.42 Ex Tax: €158.40
BGS Technic Tool Tray 1/3: Extension Bar, Adaptor and Universal Joint Set | 17 pcs.
scope of delivery:3 "Wobble" Extension Bars | 6.3 mm (1/4") | length 50 - 100 - 250 mm, knurled (BGS 2232, 2231, 2219)2 "Wobble" Extension Bars | 10 mm (3/8") | length 75 - 100 mm, knurled (BGS 242, 243)3 "Wobble" Extension Bars | 12.5 mm (1/2") | length 50 - 125 - 250 mm, knurled (BGS 233, 234, 235)1 Socket Adaptor | internal square 6.3 mm (1/4") - external square 10 mm (3/8") (BGS 271)1 Socket Adaptor | internal square 10 mm (3/8") - external square 6.3 mm (1/4") (1/4") (BGS 269)1 Socket Adapt..
€87.58 €99.65 Ex Tax: €71.20
BGS Technic Tool Tray 1/3: File Set | 5 pcs.
files with plastic handlesincludes the following tools:1 flat file, 250 mm, 1st cut (coarse)1 flat file, 200 mm, 2nd cut (medium fine)1 half-round file, 200 mm, 1st cut (coarse)1 triangular file, 150 mm, 2nd cut (medium fine)1 round file, 150 mm, 1st cut (coarse) Width 189 mm Gross weight 992 g Height 32 mm Length 408 mm..
€50.43 €55.51 Ex Tax: €41.00
BGS Technic Tool Tray 1/3: Flare Nut Wrench and Special Socket | 10 mm (3/8") | 13 pcs.
includes the following tools:6 open end ring spanners, satin chrome plated: 8 x 10 - 9 x 11 - 12 x 13 - 14 x 15 - 16 x 18 - 17 x 19 mm1 special flare nut wrench with reinforced hexagon ends, double cranked, length: 175 mm, satin chrome plated: 10 x 11 mm6 special sockets, internal square 10 mm (3/8"), slotted: 10 mm (slot 7.4 mm) - 11 mm (slot 8.8 mm) - 12 mm (slot 9.1 mm) - 14 mm (slot 10.5 mm) - 17 mm (slot 13.3 mm) - 19 mm (slot 14.4 mm)for the assembly of top and side wired temperature senso..
€150.55 €165.66 Ex Tax: €122.40
BGS Technic Tool Tray 1/3: Flywheel / Crankshaft Pulley Locking and Chain Cover Separating Tool Set | for Renault, Nissan
for locking the flywheel and front pulley and separating the chain cover when replacing the timing chainsuitable for following models:Renault 1.4 / 1.6 / 2.0 / 2.5 / 3.5L petrol engines with timing chainpetrol engines 1.4 L (H4JT) / 1.6 L ( M5M) / 2.0L (M4R) / 2.5 L (2TR) / 3.5 L (V4Y)for locking the flywheel on Diesel engines 2.0 L (M9R) / 2.3 L (M9T), use with BGS 8421scope of delivery:crankshaft pulley holding tool, to be used as OEM MOT 2019 / MOT 1789flywheel locking tool, to be used as OEM..
€121.18 €189.43 Ex Tax: €98.52
BGS Technic Tool Tray 1/3: Gearbox Separating Tool Set | for VAG DSG Gearbox (0AM)
for separating the transmission housingsuitable for the following vehicle models with 7-speed DSG transmission (0AM):Audi:A1 (2010-) FWD L4 1.4L 1.6LA3 (2008-) FWD/AWD L4 1.2L 1.4L 1.6L 1.8LQ3 (2011-) FWD/AWD L4 1.4L 1.6L 1.8LSkoda:Fabia (2010-) FWD L4 1.2L 1.4LModela (2011-) FWD L4 1.4L 1.6LOctavia (2009-) FWD L4 1.4L 1.6L 1.8L 2.0LSuperb (2008-) FWD L4 1.8LSeat:Altea / XL (2009-) FWD L4 1.6L 1.8LIbiza (2009-) FWD L4 1.2L 1.4L 1.6LLeon (2007-) FWD L4 1.8LVolkswagen:Beetle (2011-) FWD L4 1.4L 1...
€143.27 €177.12 Ex Tax: €116.48
BGS Technic Tool Tray 1/3: Glow Plug Removal and Thread Repair Set | M8, M10 | 17 pcs.
simplifies the assembly and disassembly and professional repair of glow plug threadsextractor for fixed glow plugsstep drills to drill out damaged glow plugs 7 x 5.5 mm and 9 x 5.5 mmtaps for regrooving of the glow plug threads: M8 x 1.0 mm - M10 x 1.0 mm - 6.3 mm (1/4") x 28UNFratchet tap holderE-type socket E10 Width 189 mm Gross weight 1654 g Height 32 mm Length 408 mm..
€234.19 €245.10 Ex Tax: €190.40
BGS Technic Tool Tray 1/3: Hammer and Chisel Set | 14 pcs.
includes the following tools:hammer with interchangeable heads, ~ 35 mm5 interchangeable heads, diameter approx. 35 mm, made from copper, aluminium, plastic, nylon, steeloverall length: 305 mmhickory handlemachinist€™s hammerhickory handlemanufactured in accordance with DIN 1041weight: 300 gcorner pin drive, chisel and punch sethardened hexagonal shaftpin punches: 3-4-5-6-8 mm1 flat chisel 15mm1 cross-cut chisel 4mm1 center punchlength 150 mm Width 189 mm G..
€97.17 €135.68 Ex Tax: €79.00
BGS Technic Tool Tray 1/3: Handheld Lamp and Magnetic Lifter | 3 pcs.
scope of delivery:COB LED Workshop Lamp with Magnet and Hook (BGS 85345)for perfect illumination of dark work areasABS plastic housing with roughened, rubberized surface for a secure hold of the lamp in the hand2 fold-out and 360° swiveling hooks on the back of the housing180° rotatable handle lockable in 8 stepsLED charging indicator on the back of the housing (red / green)with hooks for fixing the lamp in many placesstrong magnet on base and two magnets on the back allow to fix on most metalli..
€95.45 €104.67 Ex Tax: €77.60
BGS Technic Tool Tray 1/3: Hole Punch Set | 15 pcs.
includes the following tools:13 interchangeable hole punches 5 - 6 - 8 - 10 - 11 - 13 - 16 - 19 - 22 - 25 - 28 - 32 - 35 mm1 quick change punch holder with ergonomic handle design and spring-mounted centre punch, suitable for paper, plastic film and rubber, ideal for punching paper seals1 machinist's hammer, 400 g, shock-resistant handle, protection metal sleeve, safety pin, round ring wedge, forged hammer head, made in accordance with DIN 1041 Width 189 mm ..
€74.69 €92.42 Ex Tax: €60.72
BGS Technic Tool Tray 1/3: Impact Bit Socket Set | 12.5 mm (1/2") | 24 pcs.
bit sockets for internal hexagon, T-Star (for Torx) and spline (for XZN) screw headscompact set compositionsuitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringtool tray made from high-resistance foamthe tools are protected in the hard foam tray and are stowed in the recesses in a non-slip mannereach individual tool has it´s appropriate placesuitable for all BGS workshop trolleysoutput profile 1: internal hexagonoutput profile 1: T-Star (for Torx)output pro..
€130.87 €147.59 Ex Tax: €106.40
BGS Technic Tool Tray 1/3: Impact Sockets Hexagon | 12.5 mm (1/2") | 10 - 24 mm | 20 pcs.
with groove and hole for retaining ballespecially suitable for impact usehexagon Pro Torque® socketsScope of deliveryimpact sockets, length 38 mm 10 - 12 - 13 - 14 - 15 - 17 - 19 - 21 - 22 - 24 mmimpact sockets, length 72 mm 10 - 12 - 13 - 14 - 15 - 17 - 19 - 21 - 22 - 24 mm Width 189 mm Gross weight 3838 g Height 32 mm Length 408 mm..
€113.16 €129.33 Ex Tax: €92.00
BGS Technic Tool Tray 1/3: Injector Extractor Set | for Trucks
for disassembly of injectors on truckssuitable for pump-nozzle systems (e. g. Delphi) and conventional injectorsmaterial: carbon steelsurface finish 1: zinc platedsurface finish 2: phosphatedbuiled in vehicle models from:Volvo, Scania, Mercedes-Benz, MAN, Renault and Ivecoscope of delivery:1 pulling hook, external thread M14 x 1.51 joint, external thread M18 x 1.51 adapter M18 x 1.51 sliding hammer handle, internal thread M18 x 1.51 sliding hammer weight, 2.73 kg1 sliding hammer shaft, external ..
€211.17 €305.64 Ex Tax: €171.68
BGS Technic Tool Tray 1/3: Knife and Shears Set | 6 pcs.
includes the following tools:1 universal shears, 180 mm1 electrician's scissors, 145 mmheavy-duty stainless steel blades2 component handle with soft grips for comfort with spring and security lockone saw-type bladewith wire stripping gap1 folding knife, 145 mmmaterial: aluminium, anodisedfor cutting carpet, cardboard, foils, etc.locking mechanism for locking the knife in open state and unlocking mechanism at the back of the handle for folding the knifeblade locking mechanism with quick release f..
€58.27 €73.22 Ex Tax: €47.38
BGS Technic Tool Tray 1/3: L-Type Wrench Set | extra long | T-Star (for Torx), T-Star tamperproof (for Torx), Internal Hexagon | 27 pcs.
compact set compilation in a workshop trolley tool trayextra long version of the individual L-type wrenchesperfectly suitable for screws in hard to reach areaseach set in sturdy plastic folding holder for easy removal and storagelasered size marking on the L-type wrenchescontinuous hardenedscope of delivery:1 L-type wrench set | extra long | T-Star (for Torx) T10 - T50 | 9 pcs. (BGS 793)1 L-type wrench set | extra long | T-Star tamperproof (for Torx) T10 - T50 | 9 pcs. (BGS 794)1 L-type wrench s..
€75.52 €64.66 Ex Tax: €61.40
BGS Technic Tool Tray 1/3: Lock Ring Pliers Set for Drive Shafts | 3 pcs.
for assembly of locking rings on driveshaftsscope of delivery:1 Lock Ring Pliers for Drive Shafts, 30..
€87.33 €79.72 Ex Tax: €71.00
BGS Technic Tool Tray 1/3: Locking Pliers | 4 pcs.
adjustable contact pressurescope of delivery:1 self grip pliers, 140 mm1 self grip pliers, 185 mm1 self grip pliers, 220 mm1 long nose pliers, 175 mm Width 189 mm Gross weight 1220 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel..
€60.89 €61.56 Ex Tax: €49.50
BGS Technic Tool Tray 1/3: Machinist's File Set | 5 pcs.
non-slip 2-component handleheight of the insert without tools: 32 mmscope of delivery:1 tool tray 1/3 | empty | for bgs 4197 (BGS 4197-1)1 mechinist's file | hand | 1st cut | 200 mm (BGS 6550)1 mechinist's file | hand | 2nd cut | 200 mm (BGS 6551)1 mechinist's file | halfround | 1st cut | 200 mm (BGS 6553)1 mechinist's file | triangular | 2nd cut | 150 mm (BGS 6593)1 mechinist's file | round | 1st cut | 150 mm (BGS 6576) Width 189 mm Gross weight ..
€61.25 €57.43 Ex Tax: €49.80
BGS Technic Tool Tray 1/3: Measuring Tool Set | 7 pcs.
includes the following tools:1 digital vernier caliper with digital display, 150 mm, scale in mm/inch, reading 1/100 mm, zero reset in any position, metric/inch conversion, + / - display, incl. battery1 x 20-blades precision feeler gauges 100 mm long, 0.05 - 1.0 mm1 contour gauge, pin type, length: 125 mm1 measuring tape, 19 mm x 5 m, with locking function and belt clip, in accordance with EEC1 scriber, 150 mm, carbide metal tip1 digital tire depth gauge, 0 - 28 mm, measuring range up to 28 mm, ..
€111.19 €124.61 Ex Tax: €90.40
BGS Technic Tool Tray 1/3: Metal Shears, Step Drill | 5 pcs.
tinmans Shears, cuts left + straight, 260 mmtooth jaw forged from chrome vanadium steel, right + straight cutting, 260 mmHSS step drill, titanium nitride, ~ 4 - 12 mm, steps: 4, 5, 6, 7, 8, 9, 10, 11, 12 mmHSS step drill, titanium nitride, ~ 4 - 20 mm, steps: 4, 6, 8, 10, 12, 14, 16, 18, 20 mmHSS step drill, titanium nitride, ~ 4 - 30 mm, steps: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 mm Width 189 mm Gross weight 1536 g Height ..
€97.42 €115.61 Ex Tax: €79.20
BGS Technic Tool Tray 1/3: Multi-Function and Miter Shears Set | for Plastic Tubes | 8 pcs.
for cutting plastic water pipes, plastic connecting pipes, plastic strips, branches, cables, etc.integrated protractor allows quick and easy cutting to perfect mitersuitable for pipe diameters of 16 - 19 - 25 mmadjustable cutting angle 45 - 60 - 75 - 90 - 105 - 120 - 135 degreesstabil steel frame made of SK5 steelergonomic, non-slip plastic handles for comfortable workparticularly suitable for plumbers, electricians and carpentersblade material: stainless steelmaterial of the holding forms: alum..
€75.74 €95.90 Ex Tax: €61.58
BGS Technic Tool Tray 1/3: Oil Pan Sockets / Oil Filter Chain Wrench | 22 pcs.
Scope of deliveryProfessional Oil Filter Chain Wrenchpro version with duplex chainchain width 13 mmfor rusted oil filterseasy handlingsuitable for all steel filter cartridges with diameter 60 - 115 mmSpecial Oil Pan Sockets, internal hexagon drive, 10 mm (3/8"), 21 pcs.black finish9 hexagon sockets 8 - 9 - 10 - 12 - 14 - 17 mm, 5/16", 10 mm (3/8"), 12.5 mm (1/2")8 square sockets 8 - 11 - 12 - 13 - 14 mm, 5/16", 10 mm (3/8"), 12.5 mm (1/2")1 internal square socket 10 mm1 triangle socket 10 mm1 sp..
€107.26 €122.54 Ex Tax: €87.20
BGS Technic Tool Tray 1/3: Pliers Set | 3 pcs.
includes the following tools:diagonal side cutter, 165 mm2-component handleslong nose pliers, straight, 200 mm2-component handleswaterpump pliers with box joint, 240 mm, aperture max. 38 mmforged, black finishhandles dip insulated Width 189 mm Gross weight 888 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€62.73 €59.20 Ex Tax: €51.00
BGS Technic Tool Tray 1/3: Precision Pliers Set "Mini" | 6 pcs.
spring loaded2-component handlesincludes the following tools:combination pliers, 115 mmdiagonal side cutters, 115 mmlong nose pliers, 130 mmbent nose pliers, 125 mmend cutting pliers, 110 mmneedle pliers, 150 mm Width 189 mm Gross weight 798 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel..
€70.11 €68.20 Ex Tax: €57.00
BGS Technic Tool Tray 1/3: Ratchet Combination Wrench Set | 8 - 19 mm | 12 pcs.
fine toothed (72 tooth)scope of delivery:1 Ratchet Combination Wrench | 8 mm (BGS 6508)1 Ratchet Combination Wrench | 9 mm (BGS 6509)1 Ratchet Combination Wrench | 10 mm (BGS 6510)1 Ratchet Combination Wrench | 11 mm (BGS 6511)1 Ratchet Combination Wrench | 12 mm (BGS 6512)1 Ratchet Combination Wrench | 13 mm (BGS 6513)1 Ratchet Combination Wrench | 14 mm (BGS 6514)1 Ratchet Combination Wrench | 15 mm (BGS 6515)1 Ratchet Combination Wrench | 16 mm (BGS 6516)1 Ratchet Combination Wrench | 17 mm (..
€123.00 €129.48 Ex Tax: €100.00
