Special Offers
BGS Technic Tool Tray 1/3: Camshaft Counterholding Tool Set | for VAG
for counter-holding when loosening and fastening oil pump and camshaft sprocket boltsalso suitable for turning the crankshaft when checking the engine timingsuitable for the following EA211 engines:1.0 MPI, engine codes: CHYA, CHYC, CPGA, CHYB1.0 TSI, engine codes: CHZE, CHZK, CHZA, CHZB, CHZC, CHZD, CHZJ1.2 TSI, engine codes: CJZB, CJZC, CYVA, CJZA, CJZD, CYVB1.4 TSI, engine codes: CPWA, CZCC, CMBA, CZCA, CHPA, CPTA, CZDA, CVNA, CZEAbuilt in the following VAG models:Audi A1, A3 (8V), A4 (B9), A..
€218.80 €259.27 Ex Tax: €177.89
BGS Technic Tool Tray 1/3: Camshaft Sprocket Locking Tool Set | universal
for locking camshaft sprockets when renewing the tooth beltsuitable for engines with 1, 2 or 4 camshafts (V-engines), also suitable for locking between camshaft sprocket and diesel injection pump sprockets on certain diesel enginesuniversal application on vehicles of the following manufacturers::Audi, Alfa Romeo, Chrysler, Citroen, Ford, Honda,Hyundai, Isuzu, Land Rover, Lexus, Mazda,Mitsubishi, Peugeot, Renault, MG, Seat, Skoda,Subaru, Toyota, Opel, Volkswagen, Volvoscope of delivery:twin camsh..
€177.02 €198.58 Ex Tax: €143.92
BGS Technic Tool Tray 1/3: Circlip Pliers Set | 4 pcs.
for dismantling and assembly of snap ringsspecial hardened tips, ~ 1.8 mmPVC dipped handlesincludes the following tools:circlip pliers for external snap rings, 180 mm, angularcirclip pliers for external snap rings, 180 mm, straightcirclip pliers for internal snap rings, 180 mm, angularcirclip pliers for internal snap rings, 180 mm, straightheight of the insert without tools: 32 mm Width 189 mm Gross weight 694 g Height 32 mm ..
€104.11 €119.15 Ex Tax: €84.64
BGS Technic Tool Tray 1/3: Clutch Aligning Tool Set | for Trucks | 6 pcs.
for centering of the clutch discrequired when replacing truck single and double clutch discsscope of delivery:centering mandrel (for clutch disc), 42 - 52 mmcentering mandrel (for clutch disc), 36 - 45 mmcentering sleeve (for pilot bearing), 30 mmcentering sleeve (for pilot bearing), 27 mmcentering sleeve (for pilot bearing), 25 mmcentering sleeve (for pilot bearing), 20 mmreplacement O-rings Width 189 mm Gross weight 2954 g Height 32 ..
€205.66 €227.82 Ex Tax: €167.20
BGS Technic Tool Tray 1/3: Combination Spanner Set | 24 - 32 mm | 4 pcs.
cold forged, ring end 15° offsetprofile on ring side: 12-pointincludes the following tools:4 combination spanners: 24 - 27 - 30 - 32 mmheight of the insert without tools: 32 mm Width 189 mm Gross weight 1852 g Height 66 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€84.87 €84.01 Ex Tax: €69.00
BGS Technic Tool Tray 1/3: Combination Spanner Set | 6 - 22 mm | 12 pcs.
cold forgedring head 15° angledprofile on ring side: 12-pointScope of delivery:12 combination spanners 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 17 - 19 - 22 mm Width 189 mm Gross weight 1246 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€72.57 €74.40 Ex Tax: €59.00
BGS Technic Tool Tray 1/3: Combined Bit Set | 49 pcs.
includes the following tools:14 bits, short and long models, 10 mm (3/8") drive, internal hexagon: 4 - 5 - 6 - 7 - 8 - 10 - 12 mm14 bits, short and long models, 10 mm (3/8") drive, T-Star (for Torx): T20 - T25 - T30 - T40 - T45 - T50 - T5510 bits, short and long models, 10 mm (3/8") drive, spline (for XZN): M5 - M6 - M8 - M10 - M129 bits, 30 mm long, 10 mm (3/8") drive, spline (for Ribe): M5 - M6 - M7 - M8 - M9 - M10 - M11 - M12 - M131 bit adaptor, 10 mm (3/8") drive, internal hexagon 10 mm (3/8..
€81.67 €100.69 Ex Tax: €66.40
BGS Technic Tool Tray 1/3: Consumables | for plastic Repair Set BGS 9388
accessory kit for plastic repair set with gas soldering iron BGS 9388scope of delivery:2 welding heads, 9 mm and 12 mm1 screwdriver, 3 x 50 mm1 cleaning brush1 cleaning rod3 stainless steel meshes for reinforcement, 100 x 60 mm6 welding rods for ABS plastic, length 170 mm6 welding rods for PS plastic, length 170 mm6 welding rods for PE plastic, length 170 mm6 welding rods for PP plastic, length 170 mm Width 189 mm Gross weight 410 g Heigh..
€63.71 €67.76 Ex Tax: €51.80
BGS Technic Tool Tray 1/3: Crankshaft Pulley Holder and Rotating Tool Set | for BMW 2.5D
for rotating the diesel engine crankshaft and holding the crankshaft pulley while loosening or tightening the middle pulley boltallows safe and damage-free removing and installation of crankshaft pulleyssuitable for 2.5 l diesel engines, built in BMW models: 325, 330, 335, 525, 530, 535, 730engine codes: M57N256D2, M57306D3, M57306D4, M57306D5, M57D30A, M57N206D3, M57N2306D3, M57N306D2, M57N306D3, M57N306D5, N57N306D2, N57N306D3scope of delivery:crankshaft pulley holding tool, to be used as OEM ..
€227.25 €306.09 Ex Tax: €184.76
BGS Technic Tool Tray 1/3: Crankshaft Pulley Tool Set | for MINI Cooper engines W11
allows a safe disassembly and assembly of the crankshaft pulley (vibration damper) on 1.6l MINI Cooper and MINI Cooper S engines (type W11)slots in the puller disc allow disassambling of both types of W11 pulleysincludes a thrust pin that prevents damage to the crankshaft noseto be used as OEM 118450 / 118441 / 118270scope of delivery:puller discmounting thrust piecethrust pinpulling spindlemounting spindle6 fastening screws Width 189 mm Gross weight 20..
€148.58 €160.49 Ex Tax: €120.80
BGS Technic Tool Tray 1/3: Crimping Pliers Set | with 5 Pairs of Pressing Jaws
scope of delivery:1 crimping tool set with ratcheting function, adjustable jaws and pressure point unlocking1 crimping jaws set for closed non-insulated terminal ends, AWG (20-18) - (16-14) - (12-10) - 8 or DIN 1.5 - 2.5 - 6 - 10 mm² or JIS 1.25 - 2 - 5.5 - 8 mm²1 crimping jaws set for insulated terminal ends, AWG (22-18) - (16-14) - (12-10) or DIN (0.5-1.0) - (1.5-2.5) - (4-6) mm²1 crimping jaws set for open, non-insulated terminal ends, AWG (20-18) - (16-14) - (12-10) or DIN (0.5-1.0) - (1.5-2..
€154.49 €175.85 Ex Tax: €125.60
BGS Technic Tool Tray 1/3: Crimping Tool and Wire Strippers | 7 pcs.
scope of delivery:1 crimping tool set with ratcheting function, adjustable locking device and pressure point unlocking, exchangeable crimping jaws1 crimping jaws set for closed non-insulated terminal ends, AWG (20-18) - (16-14) - (12-10) - 8, DIN 1.5 - 2.5 - 6 - 10 mm², JIS 1.25 - 2 - 5.5 - 8 mm²1 crimping jaws set for insulated terminal ends, AWG (22-18) - (16-14) - (12-10), DIN (0.5-1.0) - (1.5-2.5) - (4-6) mm²1 crimping jaws set for open, non-insulated terminal ends, AWG (22-18) - (16-14) - (..
€182.04 €196.22 Ex Tax: €148.00
BGS Technic Tool Tray 1/3: Crowfoot Spanner Set | 10 mm (3/8") / 12.5 mm (1/2") / 20 mm (3/4") | 10 pcs.
for manual operation1 crowfoot spanner 10 mm (3/8") drive: 19 mm6 crowfoot spanners 12.5 mm (1/2") drive: 21 - 22 - 24 - 27 - 30 - 32 mm3 crowfoot spanners 20 mm (3/4") drive: 36 - 41 - 46 mm Output profile 12-point Width 189 mm Gross weight 2484 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€159.78 €200.65 Ex Tax: €129.90
BGS Technic Tool Tray 1/3: Cylinder Head Gasket Alignment Tool Set | for VAG
for alignment of gasket and cylinder head to engine blockreplaces fitting tubes, which are no longer installed in many VAG enginesprevents misalignment and damage to the cylinder head gasketfacilitates cylinder head assemblyscope of delivery:1 disassembly tool with handle, M6 x 1.0LH, to be used as VAG OEM 34501 disassembly tool with hexagon, M6 x 1.0LH, to be used as VAG OEM 3450/32 alignment pins, M10 x 1.5, to be used as VAG OEM 3450/12 alignment pins, M10 x 1.5, to be used as VAG OEM 3450/22..
€92.89 €103.28 Ex Tax: €75.52
BGS Technic Tool Tray 1/3: Differential Cage Bearing Puller
for disassembling bearings on the differential cagesuitable for a variety of motor vehicles and light commercial vehiclesscope of delivery:retaining boltsspindle 3/4" x 16 UNF, outer hexagon 22 mm drivepuller bridge with holes for retaining boltsclamping bridgepuller feet, lenght 102 mmstepped disc, diameter 44.4 / 28.5 mmstepped disc, diameter 41.2 / 31.7 mmstepped disc, diameter 38.1 / 28.5 mmstepped disc, diameter 34.1 / 23.8 mm Width 189 mm Gross weight..
€185.58 €210.11 Ex Tax: €150.88
BGS Technic Tool Tray 1/3: Double Open End Spanner Set | 6 - 22 mm | 8 pcs.
cold forged size spanner lengthincludes the following tools:8 double open end spanners: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 Width 189 mm Gross weight 1070 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€52.89 €60.09 Ex Tax: €43.00
BGS Technic Tool Tray 1/3: Double Ring Spanner Set | 6 x 7 - 20 x 22 mm | deep offset Ends | 8 pcs.
cold forgedprofile on ring side: 12-pointincludes the following tools:8 double ring spanners: 6 x 7 - 8 x 9 - 10 x 11 - 12 x 13 - 14 x 15 - 16 x 17 - 18 x 19 - 20 x 22 mm Width 189 mm Gross weight 1640 g Height 32 mm Length 408 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated..
€72.57 €75.88 Ex Tax: €59.00
BGS Technic Tool Tray 1/3: Double Vanos Adjustment Tool Set for BMW M52TU / M54 / M56
for setting the Vanos units on BMW M52TU / M54 / M56 enginesincludes the following tools:VANOS setting tool, to be used as OEM 116150pressure connection, to be used as OEM 113450secondary sprocket mounting device, to be used as OEM 116180 Width 189 mm Gross weight 1880 g Height 32 mm Length 408 mm To be used as OEM1 11 6 150 | 11 3 450 | 11 6 180 BMW..
€97.42 €112.20 Ex Tax: €79.20
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Alfa Romeo / Lancia 1.75
for checking and setting the engine timingsuitable for Alfa Romeo Giulietta, 159, Spider, Brera 1.75L TBi and Lancia Delta 1.75L DI Turbo Jetengine codes: 940A1.000, 939B1.000scope of delivery:camshaft locking tool, to be used as OEM 2000033500crankshaft locking tool, to be used as OEM 2000003000, EN-46788, 1860771000, 1860905000, 1860905010, 2192543000flywheel locking tool, to be used as OEM 2000033600, 1820630000, 1820007000, 1820228000, 1820240000, 1860898000, 1820240000 ..
€186.76 €197.55 Ex Tax: €151.84
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for BMW S65
for adjusting the engine timing, when replacing the timing chain, cylinder head gasket, etc.suitable for following models with S65 engines: BMW M3 E90 / E92 / E93 (>2007) Wiesmann MF4 (>2009)scope of delivery:camshaft adjusting tool (inlet), to be used as OEM 11 9 971camshaft adjusting tool (exhaust), to be used as OEM 11 9 972crankshaft locking tool, to be used as OEM 11 5 320vanos adjusting tool, to be used as OEM 11 5 370chain tensioner locking tool, to be used as OEM 11 5 2906 mounting screw..
€144.89 €324.83 Ex Tax: €117.80
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for BMW, MINI 1.5, 2.0 Diesel
for checking and adjusting the engine timingsuitable for the following models:BMW:114d / 116d / 118d / 125d (F20/21) 2015-2017214d / 216d / 218d / 220d / 225d (F22 / 23 / 45 / 46), 2014-2017316d / 318d / 320d / 325d (F30 / 31 / 34), 2015-2017420d / 425d / 418d (F32 / 33 / 36), 2015-2017518d / 520d (F10 / 11), 2014-2017520d / 525d (G30 / 31 / F90) 2016-620d GT (G32GT) 2018-725d / 725Ld (G11/12) 2016-X1 16d / 18d / 20d / 25d (F48), 2015-2017X2 18d / 18dX / 20dX / 25dX (F39) 2018-X3 18d / 20dX (F25..
€195.82 €206.71 Ex Tax: €159.20
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Ford 1.0, 3-cylinder Ecoboost
for checking / adjusting the engine timingsuitable for Ford engines 1.0L 3-cylinder, with 74 KW / 88 KW / 92 KW / 103 KW, installed on e.g. Fiesta / Focus / B-MAX / EcoSportEngine codes M1DD / M1JA / M1JC / M1JE / M1JHM1JJ / M1DA / M2DA / M2DB / M2DC / SFDBSFJA / SFJB / SFJC / SFJD /includes the following tools:camshaft fixing tool, to be used as OEM 303-1605 (x 2)camshaft adjuster setting tool, to be used as OEM 303-1606 (x 2)crankshaft locking pin, to be used as OEM 303-1604flywheel locking to..
€249.25 €310.07 Ex Tax: €202.64
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Ford 1.5L 3 Cylinder Duratec
for checking and adjusting the engine timingsuitable for:newer Ford 1.5L 3 cylinder Duratec enginesbuild in:Ford EcosportFord FiestaFord Focusscope of delivery:1 camshaft locking tool, to be used as OEM 303-16391 flywheel locking tool, to be used as OEM 303-16431 balance shaft alignment tool, to be used as OEM 303-16471 scissor gear tool, to be used as OEM 303-1648 Width 189 mm Gross weight 1756 g Height 32 mm Length ..
€192.27 €206.65 Ex Tax: €156.32
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Ford 2.5, Volvo 1.6 - 2.5 & 2.4D
for setting the camshaft and crankshaft timing when replacing the cylinder head gasketsuitable for following models:FordFocus 2.5 RS / ST, Mondeo 2.5, S-Max 2.5, Galaxy 2.5 ST (2005-)engine codes: 2.5 Turbo (Euro 4), HUBA / HUWA / HYDA / JZDAVolvoC30 (06-10), C70 (98-10), S40 (96-10), S60 (00-09), S70 (97-07), S80 (98-06), V40 (96-10), V50 (04-10), V70 (97-07), XC70 (02-07), XC90 (02-10)engine codes: 1.6 (B4164S), 1.8 (B4184S), 1.9T (B4194T), 2.0 (B4204S / B4204T), 2.0T (B5204T3 / B5204T4 / B520..
€249.25 €317.45 Ex Tax: €202.64
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Jaguar, Land Rover 5.0 V8
for adjusting and checking the engine timingrequired for working on valve drive and renewing the cylinder head gasketsuitable for following models with 5L V8 engine: X150€“XK(10MY), X250€“XF(10MY), X351€“XJ(10MY)scope of delivery:camshaft alignment tools, to be used as OEM 303-1445crankshaft timing pin, to be used as OEM 303-1447flywheel locking tool, to be used as OEM 303-1448camshaft turning tool, to be used as OEM 303-1452timing chain pre-tensioning tool, to be used as OEM 303-1482 ..
€249.25 €329.27 Ex Tax: €202.64
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Jaguar, Land Rover, Ford, Citroën 2.0, 2.2, 2.4, 3.2 Diesel
for adjusting and checking the engine timingrequired for e. g. working on the valve drive and renewing the cylinder head gasketsuitable for the following models:Ford Mondeo (2000 - 2007), Transit (2000 - 2011)Citroen Relay (2006 - 2011), Jumper IIIFiat Ducato (2006 - 2011)Jaguar X-Type (2001 - 2010)Land Rover Defender (2007 - 2011)Peugeot Boxer III (2006 - 2011)LDV Convoy (2002 - 2006)with DURATORQ (PUMA) diesel engines2.0L engine codes: ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, HJBA, HJBB, HJBC..
€175.15 €216.16 Ex Tax: €142.40
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Jeep 3.0 V6 Diesel
for adjusting the engine timing when replacing the timing chain, cylinder head gasketsuitable for following vehicles:Jeep Grand Cherokee 3.0 V6 CRD (2011-2015), engine code: EXF VM23DJeep Grand Cherokee 3.0 Multijet (2011-2015), engine code: EXF VM44Dscope of delivery:camshaft locking tool for right cylinder head, to be used as OEM VM10338-1camshaft locking tool for left cylinder head, to be used as OEM VM10338-2tensioner locking pin, to be used as OEM VM1039acrankshaft timing pin, to be used as..
€220.02 €251.60 Ex Tax: €178.88
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Land Rover 3.6 TD V8
for adjusting the engine timing when replacing the timing chain and cylinder head gasketsuitable for following models:Range Rover (L332) 3.6 TD V8 (2006-2011), engine code: 368DTRover Sport L320 3.6 TD V8 (2006-2011), engine code: 369DTscope of delivery:camshaft alignment tools (2x) with fixing screws, to be used as OEM 303-1236flywheel locking tool, to be used as OEM 303-1243crankshaft timing pin, to be used as OEM 303-1238camshaft rotating pin, to be used as OEM 303-1239 ..
€173.58 €192.68 Ex Tax: €141.12
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Land Rover, Jaguar V8
for adjusting and checking the engine timingrequired for e.g. working on valve drive and renewing the cylinder head gasketsuitable for 3.2, 3.5, 4.0, 4.2, 4.4L engines in the following models:Jaguar XJ8 (97-09), engine AJ26 AC, BC, LC, 1B, 5G, SBJaguar XJR (97-09), engine AJ27 KB, CC, MA, 2B, 9G, TBJaguar S-Type (99-08), engine AJ28 KC, CE, MB, 3B, HB, PCJaguar XF (08-09), engine AJ34 3.5, DC, NB, 1G, HGJaguar XK8 (97-09), engine RB, EC, NCJaguar XKR (98-09), engine GB, PARange Rover (new) (06-0..
€175.15 €199.32 Ex Tax: €142.40
BGS Technic Tool Tray 1/3: Engine Timing Tool Set | for Opel (Vauxhall), Saab, Chevrolet 2.0l / 2.4l
for adjusting engine timing when replacing timing chain, etc.suitable for 2.0 L & 2.4 L twin cam turbo charged petrol enginessuitable for the following models:Vauxhall (Opel) Astra, Insignia, AntaraChevrolet Captiva, HHR, MalibuSaab 9-5 with engines:OPC, OPC/VXR, Turbo, E85, Turbo T-Biengine codes:2.0L > LHU, A20NFT, LTG, A20NHT, LDK, A20NHT2.4L > A24XE, A24XF, LE5, LE9scope of delivery:crankshaft pulley alignment tool, to be used as OEM EN-48585flywheel holding tool, to be used as OEM EN-43653,..
€224.99 €274.78 Ex Tax: €182.92
