Special Offers
BGS Technic T-handle Universal Joint Socket | 15 mm
sliding bar and universal jointt-bar width: 200 mm Gross weight 570 g Length 340 mm Material Chrome Vanadium Steel Wrench size 15 mm..
€6.40 €19.18 Ex Tax: €5.20
BGS Technic T-Handle Wrench Set | T-Star (for Torx) T10 - T50 | 9 pcs.
2-sided use, short and long shaftergonomic handlesmetal stand with mounting holesincludes the following tools:T-handle wrench, T-Star (for Torx)T10 x 100 mmT15 x 115 mmT20 x 120 mmT25 x 130 mmT27 x 140 mmT30 x 150 mmT40 x 160 mmT45 x 175 mmT50 x 200 mm Gross weight 1300 g Material Chrome Vanadium Steel..
€52.12 €57.72 Ex Tax: €42.38
BGS Technic T-Handle | external square 6.3 mm (1/4") | 230 mm
ergonomically designed handleblade length 180 mm Gross weight 164 g Length 230 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated Packaging suitable for wall hanging Yes..
€15.94 €15.49 Ex Tax: €12.96
BGS Technic T-Handle | wobble type 12.5 mm (1/2") | 230 mm
especially suited by the tilt function for hard to reach placesergonomic handlewith suspension hole Gross weight 240 g Length 230 mm Material Chrome Vanadium Steel Surface finish Satin chrome plated Packaging suitable for wall hanging Yes..
€14.17 €21.84 Ex Tax: €11.52
BGS Technic T-Type Wrench Set | internal Hexagon 3 - 8 mm | 5 pcs.
ergonomically shaped T-handlesincludes the following tools:internal hexagon 3 mm, length 100 mminternal hexagon 4 mm, length 100 mminternal hexagon 5 mm, length 150 mminternal hexagon 6 mml, length 150 mminternal hexagon 8 mm, length 200 mm Gross weight 652 g Material Chrome Vanadium Steel Surface finish Satin chrome plated Packaging suitable for wall hanging Yes..
€30.72 €42.36 Ex Tax: €24.98
BGS Technic Table Bench Vice | rotatable | Jaws 70 mm | with Vacuum Suction Base
with vacuum suction base for quick attachment to smooth surfacesideal when space is limited in the laboratory and for smaller mechanical tasksalso suitable for tinkering or repair workpractical ball joint and removable rubber protection jaws round off the versatilitythe ball-and-socket joint allows the vice to be continuously adjusted 360..
€36.87 €44.22 Ex Tax: €29.98
BGS Technic Tank Sensor Wrench, adjustable | 12.5 mm (1/2") Drive
all-purpose, adjustable from 80 to 199 mmsuitable for most models of Mercedes, BMW, Audi, Volkswagen, Citroen, etc.for removing and tightening the plastic ring on fuel tank sender units Gross weight 1074 g Packaging suitable for wall hanging Yes..
€66.17 €63.78 Ex Tax: €53.80
BGS Technic Tank Sensor Wrench, adjustable | 24 mm Drive
all-purpose, adjustable from 75 to 160 mmfor removing and tightening the plastic ring on fuel tank sender units Gross weight 536 g Packaging suitable for wall hanging Yes..
€26.57 €32.32 Ex Tax: €21.60
BGS Technic Tap Adaptor Socket Set | 6,3 mm (1/4") / 10 mm (3/8") Drive | 8 pcs.
internal square 1/4"(6.3 mm) and 3/8" (10 mm) driveworks with a ratchet or sliding handlesuitable for taps: 1.5 mm - 12 mm, 1/16"- 1/2" NF/NCwith magnet for holding the tapideal in tight places where a tap holder cannot be usedon metal rail Drive profile Internal square Gross weight 324 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€56.46 €57.13 Ex Tax: €45.90
BGS Technic Tap Adaptor Socket | 10 mm (3/8") Drive | 6.4 mm
for operation with a ratchet or sliding handlesuitable for tap: 6.4 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 54 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€11.51 €14.69 Ex Tax: €9.36
BGS Technic Tap Adaptor Socket | 10 mm (3/8") Drive | 7.0 mm
for operation with a ratchet or sliding handlesuitable for tap: 7.0 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 54 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€11.51 €14.69 Ex Tax: €9.36
BGS Technic Tap Adaptor Socket | 10 mm (3/8") Drive | 7.3 mm
for operation with a ratchet or sliding handlesuitable for tap: 7.3 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 54 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€11.51 €14.69 Ex Tax: €9.36
BGS Technic Tap Adaptor Socket | 10 mm (3/8") Drive | 8.4 mm
for operation with a ratchet or sliding handlesuitable for tap: 8.4 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 58 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€11.51 €14.69 Ex Tax: €9.36
BGS Technic Tap Adaptor Socket | 6.3 mm (1/4") Drive | 2.8 mm
for operation with a ratchet or sliding handlesuitable for tap: 2.8 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 1/4 " Drive profile size, metric 6,3 mm Gross weight 20 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€10.63 €14.69 Ex Tax: €8.64
BGS Technic Tap Adaptor Socket | 6.3 mm (1/4") Drive | 3.4 mm
for operation with a ratchet or sliding handlesuitable for tap: 3.4 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 1/4 " Drive profile size, metric 6,3 mm Gross weight 22 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€10.63 €14.69 Ex Tax: €8.64
BGS Technic Tap Adaptor Socket | 6.3 mm (1/4") Drive | 4.0 mm
for operation with a ratchet or sliding handlesuitable for tap: 4.0 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 1/4 " Drive profile size, metric 6,3 mm Gross weight 22 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€10.63 €14.69 Ex Tax: €8.64
BGS Technic Tap Adaptor Socket | 6.3 mm (1/4") Drive | 4.6 mm
for operation with a ratchet or sliding handlesuitable for tap: 4.6 mmwith magnet for holding the tapperfect in narrow places where a tap holder cannot be used Drive profile Internal square Drive profile size, inch 1/4 " Drive profile size, metric 6,3 mm Gross weight 24 g Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€10.63 €14.69 Ex Tax: €8.64
BGS Technic Tap and Die Set for Wheel Studs & Nuts | 12 pcs.
for recutting damaged threads on wheel bolts, wheel nuts and wheel hubssuitable for internal and external threads with sizes M12 x 1.25, M12 x 1.5, M14 x 1.5titanium (TiN) coated taps and diesscope of delivery:1 threading die | M12 x 1.25 x 30 mm (BGS 71039-1)1 threading die | M12 x 1.5 x 30 mm (BGS 71039-2)1 threading die | M14 x 1.5 x 30 mm (BGS 71039-3)1 die holder | for threading dies | for BGS 71039 (BGS 71039-4)1 tap | M12 x 1.25 (BGS 71039-8)1 tap | M12 x 1.5 (BGS 71039-9)1 tap | M14 x 1...
€61.35 €58.99 Ex Tax: €49.88
BGS Technic Tap and Die Set | Inch Sizes | 1/4" - 1" | 45 pcs.
imperial sizes20 taps for internal threads and 20 dies for external threads (one each size):fine threads: 1/4" 28UNF - 5/16" 24UNF - 3/8" 24UNF - 7/16" 20UNF - 1/2" 20UNF - 9/16" 18UNF - 5/8" 18UNF - 3/4" 16UNF - 7/8" 14UNF - 1" 14UNFrough threads: 1/4" 20UNC - 5/16" 18UNC - 3/8" 16UNC - 7/16" 14UNC - 1/2" 13UNC - 9/16" 12UNC - 5/8" 11UNC - 3/4" 10UNC - 7/8" 9UNC - 1" 8UNC1 adjustable tap wrench1 die holder1 tap holder1 adaptor for die holder1 screwdriver, slot drive 6 mmin a plastic case ..
€164.33 €162.70 Ex Tax: €133.60
BGS Technic Tap and Die Set | Inch Sizes | 1/4" - 1/2" | 56 pcs.
17 taps for internal threads (one each size):4NS366NC328NC3210NC2410NF3212NC241/4"NC201/4"NF285/16"NC185/16"NF243/8"NC163/8"NF247/16"NC147/16"NF201/2"NC131/2"NF201/8"NPT2717 dies for external threads (one each size):4NS366NC328NC3210NC2410NF3212NC241/4"NC201/4"NF285/16"NC185/16"NF243/8"NC163/8"NF24,7/16"NC147/16"NF201/2"NC131/2"NF201/8"NPT271 adjustable tap wrench 1/16" - 1/2"1 die holder 25 x 9 mm1 tool holder with sliding handle for taps | fits 1/8" - 1/4", clockwise and counter-clockwise, rev..
€117.10 €126.53 Ex Tax: €95.20
BGS Technic Tap and Die Set | M3 - M12 | 32 pcs.
7 tap sets DIN 3527 dies DIN 223 25 x 9 mm: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.751 die holder 25 x 9 mm1 tap wrench (DIN 1814) no. 11 screwpitch gauge1 screwdriverin a metal case Gross weight 1430 g Material HSS G steel..
€110.58 €121.95 Ex Tax: €89.90
BGS Technic Tap and Die Set | M3 - M12 | 32 pcs.
7 tap sets DIN 3527 dies DIN 223 25 x 9 mm: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.751 die holder 25 x 9 mm1 tap wrench (DIN 1814) no. 11 screwpitch gauge1 screwdriverin a metal case Gross weight 1408 g Material Carbon Steel (GCr15)..
€71.22 €66.58 Ex Tax: €57.90
BGS Technic Tap and Die Set | M3 - M12 | 44 pcs.
7 tap sizes (DIN 352), each size includes starter, plug and bottoming tap M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.757 dies (DIN 223) M3 x 0.5 (..
€185.98 €175.25 Ex Tax: €151.20
BGS Technic Tap and Die Set | M3 - M12 | 56 pcs.
17 taps for internal threads and 17 dies for external threads (one each size):M3 x 0.5M3 x 0.6M4 x 0.7M4 x 0.75M5 x 0.8M5 x 0.9M6 x 0.75M6 x 1.0M7 x 0.75M7 x 1.0M8 x 1.0M8 x 1.25M10 x 1.25M10 x 1.5M12 x 1.5M12 x 1.751/8" x NPT271 adjustable tap wrench1 tap holder1 die holder 25 x 9 mm1 tool holder with sliding handle for taps, M3 - M6, clockwise and counter-clockwise, reversible1 automatic centre punch5 screw extractors, heavy-duty, with square drive for tool holders, sizes 1, 2, 3, 4, 55 screw ..
€113.16 €123.73 Ex Tax: €92.00
BGS Technic Tap and Die Set | M6 - M24 | 45 pcs.
20 taps for internal threads and 20 dies for external threads (one each size)M6 x 0.75 - M8 x 1.0 - M6 x 1.0 - M8 x 1.25 - M10 x 1.25 - M10 x 1.50 - M12 x 1.50 - M14 x 1.50 - M16 x 1.50 - M18 x 1.50 - M20 x 1.50 - M22 x 1.50 - M24 x 1.50 - M12 x 1.75 - M14 x 2.0 - M16 x 2.0 - M18 x 2.5 - M20 x 2.5 - M22 x 2.5 - M24 x 3.01 adjustable tap wrench1 tap holder1 die holder1 adaptor for die holder1 Screwdriver, slot drive 6 mm Gross weight 5428 g Material ..
€157.34 €151.04 Ex Tax: €127.92
BGS Technic Tap and Die Set | Metric / Inch Sizes | 110 pcs.
especially for fine threads2 die holders2 tap holders1 T-holder for taps35 taps (starter and plug tap for each size) and dies in follwing sizes 4"-40UNC - 6"-32UNC - 8"-32UNC - 10"-24UNC - 10"-32UNF - 12"-24UNC - 1/4"-20UNC - 1/4"-28UNF - 1/4"-24UNS - 1/4"-32UNS - 5/16"-18UNC - 5/16"-24UNF - 3/8"-16UNC - 3/8"-24UNF - 7/16"-14UNC - 7/16"-20UNF - 1/2"-13UNC - 1/2"-20UNF - 9/16"-12UNC - 9/16"-18UNF - 5/8"-11UNC - 5/8"-18UNF - 3/4"-10UNC - 3/4"-16UNF - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M10 x 1.0 - ..
€216.38 €224.13 Ex Tax: €175.92
BGS Technic Tap and Die Set | Tin-Coated | M6 - M24 | 45-tlg.
20 taps for internal threads, 20 dies for external threads (one each size): M6 x 0,75 - M8 x 1,00 - M6 x 1,00 - M8 x 1,25 - M10 x 1,25 - M10 x 1,5 - M12 x 1,5 - M14 x 1,5 - M16 x 1,5 - M18 x 1,5 - M20 x 1,5 - M22 x 1,5 - M24 x 1,5 - M12 x 1,75 - M14 x 2,0 - M16 x 2,0 - M18 x 2,5 - M20 x 2,5 - M22 x 2,5 - M24 x 3,01 adjustable tap wrench1 die holder1 tap holder1 adaptor for die holder1 screwdriver, slot drive 6 mmin a plastic case Gross weight 7219 g M..
€177.02 €168.46 Ex Tax: €143.92
BGS Technic Tap Set | Starter & Plug Tap | M10 x 0.75 mm | 2 pcs.
Gross weight 48 g For thread/incline M10 x 0,75 Material Carbon Steel (GCr15)..
€5.02 €6.04 Ex Tax: €4.08
BGS Technic Tap Set | Starter & Plug Tap | M10 x 1.0 mm | 2 pcs.
Gross weight 50 g For thread/incline M10 x 1,0 Material Carbon Steel (GCr15)..
€5.31 €6.33 Ex Tax: €4.32
