Special Offers
BGS Technic Steering Head Bearing Remover | 35 - 55 mm
allows dismantling of steering head bearingssuitable for bikes with 35 to 55 mm bearing assemblies Gross weight 360 g Length 305 mm Material Chrome Molybdenum Steel Packaging suitable for wall hanging Yes..
€50.68 €49.74 Ex Tax: €41.20
BGS Technic Steering Wheel external Puller | for GM (Opel)
suitable for Opel models from 2007 Gross weight 612 g Hook foot thickness at the top 5,5 mm Hooked footh 3,5 mm Hook length 12 mm Material Chrome Vanadium Steel Hex drive size 17 mm Clamping depth 80 mm Clamping width 35 mm Spindle length 95 mm Packaging suitable for wall hanging Yes..
€60.52 €58.17 Ex Tax: €49.20
BGS Technic Steering Wheel Level
for quick and accurate alignment of the steering wheeloptimal use in the assembly of steering wheelscan be used universally for cars, vans and trucksincreased adjustment range for smaller steering wheel diameteradjustable from 255 to 370 mm Gross weight 240 g Material Aluminium Packaging suitable for wall hanging Yes..
€85.85 €71.89 Ex Tax: €69.80
BGS Technic Steering Wheel Sleeve Puller | for VW
is needed to pull the steering shaft sleevewhen replacing the turn signal / wiper switch unitsuitable for VW Golf II / III / IV, Jetta, Passat, Polo and Vento since '88external hexagon 17.0 mm Gross weight 756 g..
€146.12 €157.39 Ex Tax: €118.80
BGS Technic Step Drill and Twist Drill Set | 4 - 12 / 4 - 20 mm | 2 - 5 mm | 10 pcs.
scope of delivery:1 step drill 4-12 mm1 step drill 4-20 mm2 twist drills 2 mm2 twist drills 3 mm2 twist drills 4 mm2 twist drills 5 mm Gross weight 264 g Material HSS steel Packaging suitable for wall hanging Yes..
€31.49 €37.05 Ex Tax: €25.60
BGS Technic Step Drill Set | Ø 4 - 30 mm | 3 pcs.
HSS steel 6542nitride coatedincludes the following tools:Step drill Ø 4-12 mmStep drill Ø 4-20 mmStep drill Ø 6-30 mm Gross weight 414 g Packaging suitable for wall hanging Yes..
€74.78 €80.75 Ex Tax: €60.80
BGS Technic Step Drill Set | Titanium-Nitrided | Ø 4 - 30mm | 3 Piece
little abrasion, longer life2 mm ascending stepsscope of delivery:step drill Ø 4 - 12 mm in the following steps: 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 mmstep drill Ø 4 - 20 mm in the following steps: 4 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 mmstep drill Ø 4 - 30 mm in the following steps: 4 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 - 26 - 28 - 30 mm..
€50.43 €45.46 Ex Tax: €41.00
BGS Technic Step Drill | 5.5 - 7 mm | for BGS 8297
suitable for BGS 8297 Gross weight 38 g Surface finish Titanium-nitrided..
€29.40 €29.52 Ex Tax: €23.90
BGS Technic Step Drill | 5.5 - 9 mm | for BGS 8297
suitable for BGS 8297 Gross weight 42 g Surface finish Titanium-nitrided..
€29.40 €29.52 Ex Tax: €23.90
BGS Technic Step Drill | for BGS 148
suitable for BGS 148 Gross weight 54 g Surface finish Titanium-nitrided..
€24.11 €24.35 Ex Tax: €19.60
BGS Technic Step Drill | titanium-nitrided | Ø 4 - 22 mm
little abrasion, longer life2 mm ascending steps Gross weight 74 g Packaging suitable for wall hanging Yes..
€17.56 €19.18 Ex Tax: €14.28
BGS Technic Step Drill | titanium-nitrided | Ø 4 - 32 mm
little abrasion, longer life2 mm ascending steps Gross weight 172 g Packaging suitable for wall hanging Yes..
€20.91 €21.55 Ex Tax: €17.00
BGS Technic Step Drill | titanium-nitrided | Ø 6 - 40.5 mm
drive shaft: 10 mm11 steps: 6.0 - 8.5 - 10.5 - 12.5 - 16.5 - 20.5 - 25.5 - 29.0 - 32.5 - 36.5 - 40.5 mm Gross weight 248 g Material HSS steel Surface finish Titanium-nitrided Packaging suitable for wall hanging Yes..
€30.75 €31.88 Ex Tax: €25.00
BGS Technic Step Drill | Ø 6 - 30 mm
sizes: 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 - 26 - 28 - 30 mmmade of HSS 6542 Gross weight 224 g Packaging suitable for wall hanging Yes..
€48.95 €46.64 Ex Tax: €39.80
BGS Technic STI Short Machine Tap | HSS-G | M10 x 1.0 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 40 g..
€54.12 €49.74 Ex Tax: €44.00
BGS Technic STI Short Machine Tap | HSS-G | M10 x 1.25 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 42 g..
€41.82 €36.90 Ex Tax: €34.00
BGS Technic STI Short Machine Tap | HSS-G | M10 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 50 g..
€51.66 €43.84 Ex Tax: €42.00
BGS Technic STI Short Machine Tap | HSS-G | M11 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 64 g..
€54.12 €51.22 Ex Tax: €44.00
BGS Technic STI Short Machine Tap | HSS-G | M12 x 1.0 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 62 g..
€56.58 €52.71 Ex Tax: €46.00
BGS Technic STI Short Machine Tap | HSS-G | M12 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 64 g..
€51.66 €49.59 Ex Tax: €42.00
BGS Technic STI Short Machine Tap | HSS-G | M12 x 1.75 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 66 g..
€56.58 €49.74 Ex Tax: €46.00
BGS Technic STI Short Machine Tap | HSS-G | M14 x 1.25 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 94 g..
€68.88 €58.61 Ex Tax: €56.00
BGS Technic STI Short Machine Tap | HSS-G | M14 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 90 g..
€68.88 €60.82 Ex Tax: €56.00
BGS Technic STI Short Machine Tap | HSS-G | M16 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 172 g..
€59.04 €55.07 Ex Tax: €48.00
BGS Technic STI Short Machine Tap | HSS-G | M18 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 130 g..
€56.58 €53.59 Ex Tax: €46.00
BGS Technic STI Short Machine Tap | HSS-G | M20 x 1.5 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 174 g..
€49.08 €45.61 Ex Tax: €39.90
BGS Technic STI Short Machine Tap | HSS-G | M24 x 2.0 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 292 g..
€68.88 €62.30 Ex Tax: €56.00
BGS Technic STI Short Machine Tap | HSS-G | M5 x 0.8 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 14 g..
€32.47 €31.14 Ex Tax: €26.40
BGS Technic STI Short Machine Tap | HSS-G | M6 x 1.0 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 84 g..
€34.44 €32.03 Ex Tax: €28.00
BGS Technic STI Short Machine Tap | HSS-G | M7 x 1.0 mm
with straight grooveonly suitable for cutting the external threads of the threaded inserts Gross weight 26 g..
€39.36 €41.18 Ex Tax: €32.00
