Special Offers
BGS Technic Lambda Sensor Tester & Simulator
for testing heated and non-heated O2 sensors with 1 to 4 cablesLED indicator indicates the O2 sensor signalsimulates O2 sensor signal rich or lean, to test the ECU responsesuitable for engines with zirconium and titanium O2 sensorsthe tester identifies the connected cable, mass, heater or ECU voltage (if available)cable piercing clip for easy connectionlow battery indicatorsealed switches for workshop environmentdurable ABS housingbattery: 9V, 6F22 or equivalent, alkaline (included)operating env..
€135.99 €152.96 Ex Tax: €110.56
BGS Technic Laser Distance Meter
easy to handle, small distance meter with many functionssingle and continuous measurementsfor measuring lengths and calculating area and volumecalculation methods: direct and indirect calculation (Pythagorean theorem)memory function for measurement dataeasy to read display with backlight functiondust and spray-proof housing for use under difficult conditionsadditional spirit level for aligning the deviceaccuracy: +/- 1.5 mmunit of measurement: m / inch / feetlaser class: class IIlaser wavelength..
€76.72 €95.37 Ex Tax: €62.38
BGS Technic Lead Perlon Cable | 15 m x 3 mm
for installing antenna cables etc. Gross weight 130 g Packaging suitable for wall hanging Yes..
€10.33 €9.43 Ex Tax: €8.40
BGS Technic LED / UV Pen Light
for optimized illumination of dark work areas in industry, workshops, camping or at homecan be used without a power supplysmall, compact and particularly bright by using LED technology5 W COB LED main light source and 0.8 W UV spot LEDspecial UV light for hardening special adhesives and detecting leaks with fluorescent liquidswith magnetic baseIllumination time up to 4 hoursretaining clip for breast pocket or belt with on/off functionsimple one-handed operation Battery type ..
€22.02 €25.03 Ex Tax: €17.90
BGS Technic LED Battery Bonnet Lamp
engine compartment lighting with 120 SMD LED, switchable to 60 SMD LEDshorizontally or vertically usablefoot (two-sided), 200° swiveling & 30° rotatable3 magnets per sidehook (on both sides), 360° swivelingoff / on switch (on both sides)120 SMD LEDbrightness: 800 lmcharging time: approx. 6 hourshandle type: 2-component handlehousing material: ABS-plastictotal weight: 780 g (with charger) / 680 g (without charger)scope of delivery:LED battery-powered light230V charger12V car adaptor ..
€92.10 €111.76 Ex Tax: €74.88
BGS Technic LED garage light | 180 W
perfect for illuminating the garage or workshopmore wide-ranging application scenarios and enhanced illumination of areas compared to conventional light bulbsenergy saving due to use of LED technology10 adjustable segments, for individual illumination as requiredcan be adjusted up to 90°4 folding main spotlights, each with 2 folding segments1 fixed main spotlight in the center of the lightquick and easy installation in an E26 or E27 bulb basethe light can simply be screwed into existing bulb soc..
€61.47 €58.99 Ex Tax: €49.98
BGS Technic LED Head Lamp with Focus | 3 W
ideal for work where both hands are neededadjustable light cone (focus), from spot to floodlightmultifunction key for operating mode; 1 W / 3 W / red and white LED flashes / offadjustable, elastic headband for a secure fitadjustable lamp head inclinationsplashproof according to IPX3power source: 1.5 V AAA batteries, 3 pieces (included)light source: 3 Watt CREE Chip Power LED150 lumenslighting range: up to 100 mmaterial: ABS + aluminum Gross weight 126 g Wei..
€18.27 €19.18 Ex Tax: €14.85
BGS Technic LED magnetic Pick-Up Tool and Inspection Mirror Set
scope of delivery:1 magnetic pick up tool with LED light extendable to 665 mm, capacity 450 g1 magnetic pick up tool extendable to 665 mm, capacity 3500 g3 inspection mirrors, mirror Ø 21 - 31 - 38 mmpractical storing pouchincl. batteries Gross weight 372 g..
€78.62 €85.63 Ex Tax: €63.92
BGS Technic LED Telescope Inspection Mirror | 285 - 870 mm
non-slip telescopic griprotating and folding mirrorsmirror size: 41 x 62 mm2 LEDsincl. battery Gross weight 112 g Max. length 870 mm Min. length 285 mm Packaging suitable for wall hanging Yes..
€17.42 €18.88 Ex Tax: €14.16
BGS Technic LED Telescope Inspection Mirror | 290 - 876 mm
non-slip telescopic griprotating and folding mirrorsmirror size: 41 x 64 mm2 LEDincl. 2 batteries Gross weight 112 g Max. length 876 mm Min. length 290 mm Packaging suitable for wall hanging Yes..
€10.63 €11.50 Ex Tax: €8.64
BGS Technic LED Tweezers
tweezers with LED light to illuminate the work areawith LED on / off switchrubberized recessed grips for the ideal grip of the fingers on the tweezerscomfortable even in poor lighting conditionsmade of sturdy stainless steellight and handybroad and beveled tipsideal as a precision mechanic's tool and in model makingluminous intensity: 15000 MCDmaterial thickness tips: 4.4 mm Battery type 3 x AG3 Width 20 mm Gross weight 52 g..
€8.27 €9.43 Ex Tax: €6.72
BGS Technic LED Workshop-Light | 6 W
used to illuminate dry indoor areas20 SMD LEDs (Type 2835)brightness: 350 - 450 lumenscolor temperature: 6000 - 7000 Kpower supply: 220 - 240 V / 50 Hzcable: 5 meters rubber wire (IP20) Gross weight 452 g Power 6 W Packaging suitable for wall hanging Yes..
€27.55 €28.04 Ex Tax: €22.40
BGS Technic LED-Headlight | 12 LED
adjustable lightbatteries included Gross weight 165 g Packaging suitable for wall hanging Yes..
€12.99 €14.45 Ex Tax: €10.56
BGS Technic LED-Worklight
magnetic base ~ 23 mmmany different types of application possible200 mm flexible swan neckincl. batteries Gross weight 86 g Packaging suitable for wall hanging Yes..
€12.69 €12.83 Ex Tax: €10.32
BGS Technic Letter Punch Set | 10 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case Gross weight 2090 g Hardness grade 46 - 52 HRC Material Carbon Steel (C45)..
€45.51 €45.17 Ex Tax: €37.00
BGS Technic Letter Punch Set | 3 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case Gross weight 470 g Hardness grade 46 - 52 HRC Material Carbon Steel (C45)..
€18.30 €17.26 Ex Tax: €14.88
BGS Technic Letter Punch Set | 4 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case Gross weight 464 g Hardness grade 46 - 52 HRC Material Carbon Steel (C45)..
€16.73 €16.96 Ex Tax: €13.60
BGS Technic Letter Punch Set | 5 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case Gross weight 632 g Hardness grade 46 - 52 HRC Material Carbon Steel (C45)..
€18.45 €19.91 Ex Tax: €15.00
BGS Technic Letter Punch Set | 6 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case BGS technic KG, a traditional German, family-owned, owner-managed company, has been offering a constantly growing selection of hand tools and special automotive tools for over 45 years...
€23.37 €24.35 Ex Tax: €19.00
BGS Technic Letter Punch Set | 8 mm
suitable for punching letters into steel and iron according to DIN 1451engraving on offset surface with depth limitationcapital letters A to Zsymbol/characters "&"packed in plastic case Gross weight 1414 g Hardness grade 46 - 52 HRC Material Carbon Steel (C45)..
€33.21 €31.73 Ex Tax: €27.00
BGS Technic Letterbox locking cylinder | 18 x 20 mm
suitable for letterboxes, cabinets, drawers, furniture, etc.chrome plated zinc housing, robust qualitythread diameter: 18 mmouter diameter: 22 mmtotal installation length: approx. 28 mminstallation length up to latch: 20 mmlatch dimensions: 42 x 13 x 2 mmuse length: approx. 24 mm2 keys Gross weight 40 g Packaging suitable for wall hanging Yes..
€5.61 €6.92 Ex Tax: €4.56
BGS Technic Level | for Camber Gauge from BGS 1523
similar to BGS 1523 Gross weight 40 g..
€46.49 €50.18 Ex Tax: €37.80
BGS Technic Lever Barrel Pump | for Urea (AUS32)
for transfering fluidssuitable for 60 / 200 / 220 l barrelssuitable for the following liquids: AUS32, water, lubricants, windshield washer fluid, antifreeze, mild detergents, agricultural chemicals, etc.delivery volume: 0.5 l per strokeflow rate 20 l/minpluggable suction tube 350 - 980 mmwith 2 m flexible hoseadaptor thread size: 2" BSPtemperature range: -5 - 45 °Cmain materials: polypropylene, polyethylene, fluor elastomer seals Gross weight 1278 g..
€79.80 €83.71 Ex Tax: €64.88
BGS Technic Lever Pump for Plastic Barrels
for transferring liquids from plastic barrels with screw connection, 9G inchsuitable for oil, coolant, etc.oil-resistant flexible hosewith non-drip nozzle and a drain back nozzle holderself-priming down-stroke style pump Gross weight 966 g Flow rate 0,06 l/stroke Max. medium temperature 60 °C Suction pipe length 325 mm Hose length 1,27 m..
€80.29 €113.38 Ex Tax: €65.28
BGS Technic Lever Pump for Plastic Barrels | with DIN 61 Screw Cap
for transferring and pumping liquids from plastic containersdirect mounting and fixing of the pump by screwing it onto the canister threadsafe dosing by manual pump operationflexible PVC hose enables direct transfer of the liquid into measuring cups or measuring vesselssuitable for liquids such as machine oil, cooling lubricant concentrates, coolant, antifreeze, etc.please clean well when changing productsflow rate: max. 60 ml/strokethread standard: DIN 61material nozzle end piece: steel (zinc p..
€86.20 €95.90 Ex Tax: €70.08
BGS Technic Lever Type Grease Gun
supplied complete with delivery tip and tubeperfect suitable for automotive applicationssuitable for filling from filling pump, collecting container or with standard cartridgesstrong corpus with 0.049" (1.2 mm) wall thicknessheavy duty follower springCNC machined aluminium die cast headRolled threads for quick & easy reloadingVariable Strokeconvenient greasing even in tight spaces with limited movement of handlenon-slip textured powder coated finishergonomic rubber grip on hand leveraluminum die..
€39.82 €47.08 Ex Tax: €32.38
BGS Technic Lever Type Grease Gun | 400 g
can be filled with 400 g grease cartridges (DIN 1284), bulk grease and filling deviceoptional accessories: flexible delivery tube BGS 3066 Gross weight 1297 g..
€24.57 €34.69 Ex Tax: €19.98
BGS Technic Line Ratchet Wrench Set | 6 pcs.
suitable for working on pipe screws eg. brake lines, servo lines, oil cooler pipes, etc.ratchet function when moving the wrench headmaterial: head made of Cr-Mo, black finishedhandle made of hardened steel, chrome platedavailable in the following sizes:10 - 11 - 13 - 17 - 19 - 22 mm Gross weight 1060 g..
€141.11 €143.06 Ex Tax: €114.72
BGS Technic Lithium Grease for Grease Gun BGS 9311 | 2 Tubes
includes 2 tubes with 100 gtemperature range: 10 - 120 °Cdropping point: 180 °C Gross weight 274 g Packaging suitable for wall hanging Yes..
€44.03 €54.33 Ex Tax: €35.80
BGS Technic Loading Ramp Protection / Approach Bumper | for Truck
prevents damage to the building as well as to the truck, trailer or swap bodyreliably absorbs the force of start-up or impactwear-resistant loading ramp safety systemto avoid high repair costs of the loading ramp and the associated gate constructioneasy and quick installation due to tapered, pre-drilled holesdimensions: 450 x 250 x 100 mmhole diameter external: 53 mmhole diameter internal: 20 mm Operating temperature -55 - 55 °C Gross weight 10928 g ..
€163.54 €178.07 Ex Tax: €132.96
