Special Offers
BGS Technic Induction Coil for Induction Heater | 45 mm | angled 90° | for BGS 2169, 3390, 3391
for heating screws, nuts, shafts, etc.suitable for induction heater BGS 2169, 3390, 3391angled 90° typewire diameter: 4 mmcoil height: approx. 23 mmlength approx. 220 mmcoil internal diameter approx. 45 mm Gross weight 100 g..
€35.67 €40.74 Ex Tax: €29.00
BGS Technic Induction Coil for Induction Heater | 45 mm | straight type | for BGS 2169, 3390, 3391
for heating screws, nuts, shafts, etc.suitable for induction heater BGS 2169, 3390, 3391straight typewire diameter: 4 mmcoil height: approx. 23 mmlength approx. 230 mmcoil internal diameter approx. 45 mm Gross weight 118 g..
€35.67 €40.74 Ex Tax: €29.00
BGS Technic Induction Coil for Induction Heater | for Tie Rods | 65 mm | for BGS 2169, 3390, 3391
for heating screws, nuts, shafts, etc.suitable for induction heater BGS 2169, 3390, 3391bented typewire diameter: 4.5 mmlength approx. 215 mmcoil internal diameter approx. 27.5 mm Gross weight 108 g..
€40.59 €36.75 Ex Tax: €33.00
BGS Technic Induction Coil for Induction Heater | with ceramic protection | for BGS 2169, 3390, 3391
allows an optimum distance for heating componentshigh temperature resistancesuitable for induction heater BGS 2169, 3390, 3391 Gross weight 170 g..
€45.51 €44.43 Ex Tax: €37.00
BGS Technic Induction Coil Set for Induction Heater | angled 90° | for BGS 2169, 3390, 3391 | 8 pcs.
for heating screws, nuts, shafts, etc.suitable for induction heater BGS 2169, 3390, 3391angled 90° typewire diameter: 4 mmcoil height: approx. 23 mmlength approx. 220 mmincludes coils with the following internal diameters15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm Gross weight 1078 g..
€175.15 €183.53 Ex Tax: €142.40
BGS Technic Induction Coil Set for Induction Heater | for BGS 2169, 3390, 3391 | 12 pcs.
for heating screws, nuts, shafts, etc.suitable for induction heater BGS 2169, 3390, 3391scope of delivery:1 Induction Coil | flat (BGS 2169-5)1 Induction Coil | for Tie Rods (BGS 2169-10)1 Induction Coil | for small surfaces (BGS 2169-9)1 Ferrite Core for BGS 2169-91 Retaining Spring for BGS 2169-91 Induction Coil | with ceramic protection (BGS 2169-8)1 Induction Coil | 20 mm | angled 90°1 Induction Coil | 23 mm | angled 90°1 Induction Coil | 26 mm | angled 90°1 Induction Coil | 32 mm | angled 9..
€169.74 €193.12 Ex Tax: €138.00
BGS Technic Induction Coil Set for Induction Heater | straight type | for BGS 2169, 3390, 3391 | 8 pcs.
for heating screws, nuts, shafts, etc.suitable for induction heater product 2169, 3390, 3391straight typewire diameter: 4 mmcoil width: approx. 23 mmlength approx. 230 mmincludes coils with the following internal diameters15 - 19 - 20 - 23 - 26 - 32 - 38 - 45 mm Gross weight 1066 g..
€175.15 €183.53 Ex Tax: €142.40
BGS Technic Induction Coil, for Induction Heater | for small surfaces | for BGS 2169, 3390, 3391
allows a pinpoint heatingespecially suitable for heating of components which are difficult to access e.g. bearing rings in gearboxes, etc.suitable for induction heater BGS 2169, 3390, 3391 Gross weight 88 g..
€111.19 €137.60 Ex Tax: €90.40
BGS Technic Induction Heater | 1.2 kW
compact, lightweight handheld induction heaterwith LED lightningprinciple of operation:there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats upallows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torchwithin the shortest possible time, e.g. rusty nuts are heated and can be loosenedusing o..
€667.45 €795.88 Ex Tax: €542.64
BGS Technic Induction Heater | 1.5 kW
principle of operation:there is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats upallows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torchwithin the shortest possible time, e.g. rusty nuts are heated and can be loosenedusing on e. g. ball joint pinch bolts and other items on axle and engin..
€729.76 €1,077.90 Ex Tax: €593.30
BGS Technic Induction Heater | Trucks / Agricultural Machines | liquid cooled | 3.7 kW
principle of operation:extra strong heater for trucks and agricultural machinesthere is an alternating magnetic field, the metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as an electrical resistance and thus heats upallows heating of screws/nuts without heating surrounding components too much or even destroying them, as it is often the case when heated with a torchwithin the shortest possible time, e.g. rusty nuts are heated and can be loosenedusing for e.g. ..
€5,016.73 €5,904.87 Ex Tax: €4,078.64
BGS Technic Induction Wire for Induction Heater | for BGS 2169, 3390, 3391
for heating flanges, bearing housing, shafts, gears, exhaust connections, etc.malleable, therefore universal applicationsuitable for induction heater BGS 2169, 3390, 3391wire diameter: 4 mmwire length: 800 mm Gross weight 62 g..
€40.59 €36.31 Ex Tax: €33.00
BGS Technic Industrial Plug (male) | 16 A/250 V
with rubber protection sleeve Gross weight 64 g..
€6.20 €8.25 Ex Tax: €5.04
BGS Technic Industrial Safety Set | 2 pcs.
is not only suitable for your construction site, gardening but also for other noise situationsideal initial equipment for versatile work in the do-it-yourself sectorcan be worn in combination to ensure safe basic protection for eyes and earsdust goggles protect the eyes from splinters, chips, flying sparks, sanding particles and dustthe goggles can be individually adjusted to the person using the elastic rubber strapoverhead earmuffs protect the ears from loud noisesnormal communication is possi..
€14.28 €18.88 Ex Tax: €11.61
BGS Technic Injection Nozzle Extractor | for MAN, Mercedes-Benz | four teeth
extractor made of carbon steel with four tooth and 27 mm hexagon for counterholdingsuitable for MAN and Mercedes truckspuller spindle M 14spindle with 6 mm hex drive for mounting the nozzle on the spindleallows easy and professional removal of the nozzle Gross weight 390 g Length 105 mm..
€43.05 €42.21 Ex Tax: €35.00
BGS Technic Injection Pump Assembling and Disassembling Tool Set | for Ford 2.0 ECOblue
for removing and installing the diesel high-pressure pumphigh pressure pump wheel is held in correct positionno adjustment of the engine timing necessarysuitable for the following vehicle models with 2.0 TDCi ECOblue engine:Ford Edge (2018-2021)Ford Focus (2018-)Ford Galaxy (2018-2021)Ford Kuga (2019-)Ford Mondeo (2019-2021)Ford Ranger (2019-)Ford S-MAX (2018-2021)Ford Transit (2016-)Ford Transit Custom (2016-)Ford Tourneo Custom (2016-)for engine code:BC2X, BCCA, BCCB, BCCC, BCDA, BCFB, BCRA, B..
€154.49 €168.02 Ex Tax: €125.60
BGS Technic Injection Pump Locking Pin | for Nissan 2.2 & 2.5 Diesel
for locking the injection pump in timing position on 2.2 / 2.5 l chain driven Diesel enginessuitable for the following models:Nissan Cabstar, Navara, Pathfinder, Primera, X-Trail, Almera and Almera Tinoto be used as OEM KV11106030 Gross weight 20 g To be used as OEM1 KV11106030 Nissan..
€15.74 €20.50 Ex Tax: €12.80
BGS Technic Injection Pump Locking Tool | for BGS 8155
injection pump locking pin from BGS 8155 Gross weight 26 g To be used as OEM1 3359 | T20102 Audi To be used as OEM2 3359 | T20102 Seat To be used as OEM3 3359 | T20102 Skoda To be used as OEM4 3359 | T20102 Volkswagen..
€7.68 €8.70 Ex Tax: €6.24
BGS Technic Injection Pump Sprocket Holding Tool | for Ford 2.2 & 3.2 TDCi Duratorq (Puma)
allows removal of Diesel injection pump without disturbing the engine timingholds pump sprocket and timing chain in positionremoving of the timing chain is not requiredsuitable for following models:Ford Transit 2.2 Duratorq as of 2006Ford Transit 3.2 Duratorq as of 2006Ford Ranger 2.2 Duratorq as of 2011additional tool for engine timing tool set (BGS 9010)incl. mounting screwsto be used as OEM 303-1317 Gross weight 222 g To be used as OEM1 303-1317 Ford..
€43.05 €41.33 Ex Tax: €35.00
BGS Technic Injection Pump Sprocket Remover | for Hyundai / KIA 2.0 / 2.2 CRDI
used to remove the sprocket on high pressure diesel pumpssuitable for Hyundai & KIA 2.0 / 2.2 CRDI engines with a timing chainto be used as OEM 09331-1M100 Gross weight 368 g To be used as OEM1 09331-1M100 Hyundai To be used as OEM2 09331-1M100 Kia..
€82.41 €76.03 Ex Tax: €67.00
BGS Technic Injection Pump Wheel Puller | adjustable opening | 20 - 30 mm
for removal of e.g. suspension ball joints, tie rod joints, etc.this tool is made from special chrome molybdenum / S45C steel for max. torqueadjustable pressure range up to 70 mm Gross weight 2160 g Fork opening 20 - 30 mm Surface finish Chrome plated..
€239.51 €249.38 Ex Tax: €194.72
BGS Technic Injection Pump Wheel Puller | for BMW, Opel
from BGS 8750 Gross weight 222 g To be used as OEM1 135120 BMW To be used as OEM2 LRT12-119 Land Rover To be used as OEM3 KM-825 Opel..
€30.26 €33.95 Ex Tax: €24.60
BGS Technic Injection Pump Wheel Puller | for VAG
for removing the high pressure fuel pumpto be used OEM T10489 suitable for VAG 1.4 L, 1.6 L, 2.0 L TDi engines, built following vehicle models:Volkswagen Golf (2013-)Audi A3 (2013-1)Skoda Rapid (2012-)Skoda Octavia (2013-)Skoda Fabia (2014-)Skoda Superb (2015-)Skoda Kodiaq (2016-)Seat Alhambra (2011-)Seat Ibiza (2008-)Seat Leon (2013-)Seat Ateca (2013-) Gross weight 586 g To be used as OEM1 T10489 Audi To be used as OEM2 T10489 Seat ..
€73.80 €88.52 Ex Tax: €60.00
BGS Technic Injector Alignment Tool for Ford Duratorq | 2 pcs.
for aligning the injectors to the fuel linesit is essential to have the injectors correctly aligned to avoid the risk of a fractured pipesuitable for Ford Duratorq engines 2.0 / 2.2 / 2.4 DI / TDCI / TDDI, built in Ford Mondeo 2000-2007 / Ford Transit 2000-2006 / Jaguar X-Typemetal bar allows aligning of two injectors at the same time, to be used as OEM 303-678adjustable tool for aligning injectors, to be used as OEM 303-711 Gross weight 288 g Packaging sui..
€40.34 €44.43 Ex Tax: €32.80
BGS Technic Injector Copper Ring Assortment | 150 pcs.
for sealing of e.g. injectors on Common-Rail Diesel injection systems (CDI)material: T2 copperscope of delivery:10 injectors copper ring assortment, external Ø 13.8 mm x internal Ø 7.3 mm, thickness: 1.4 mm10 injectors copper ring assortment, external Ø 14.6 mm x internal Ø 7.5 mm, thickness: 1.3 mm10 injectors copper ring assortment, external Ø 14.6 mm x internal Ø 7.5 mm, thickness: 3.0 mm10 injectors copper ring assortment, external Ø 15.0 mm x internal Ø 7.0 mm, thickness: 2.0 mm10 injectors..
€41.70 €41.92 Ex Tax: €33.90
BGS Technic Injector Copper Ring Assortment | 551 pcs.
scope of delivery:30 sealing rings Ø 15.0 x 8.0 x 1.5 mm, universal use12 sealing rings Ø 15.0 x 7.0 x 1.5 mm, for Mercedes-Benz30 sealing rings Ø 13.0 x 7.5 x 2.5 mm, for Renault30 sealing rings Ø 15.0 x 7.5 x 1.5 mm, for Iveco Ford BMW MAN30 sealing rings Ø 15.0 x 7.5 x 2.0 mm, for Iveco Ford BMW MAN30 sealing rings Ø 15.45 x 8.0 x 2.0 mm, universal use12 sealing rings Ø 13.5 x 10 x 2.0 mm, for Mazda30 sealing rings Ø 15.5 x 7.5 x 2.5 mm, for Ford12 sealing rings Ø 15.5 x 7.5 x 1.5 mm, for Lan..
€151.34 €169.49 Ex Tax: €123.04
BGS Technic Injector Disassembly Claw
suitable for BGS 62005claw internal width: 12.2 mm Gross weight 482 g..
€75.37 €89.03 Ex Tax: €61.28
BGS Technic Injector Extractor Set | for Trucks | 4pcs.
for extracting of Bosch and Delphi pump-nozzle-units and traditional truck injectorssuitable for truck models from Volvo, Scania, Mercedes-Benz, Man, Renault and Ivecoscope of delivery:sliding hammer rod with handlesliding hammerpulling adaptorpulling hook Gross weight 4820 g..
€206.54 €217.05 Ex Tax: €167.92
BGS Technic Injector Extractor Set | for VAG | universal
for removing common rail injectors and VAG pumpe nozzle unitsespecially suitable for burnt / stuck injectorsscope of delivery:sliding hammervice clamp for common rail injectorspulling hook for VAG pump nozzle units Gross weight 3782 g..
€171.71 €245.25 Ex Tax: €139.60
BGS Technic Injector Extractor Tool Kit
for assembly and removal of diesel injectorsvarious adaptors make the kit suitable for most diesel injectorsincludes also the following components:3 different slide hammers1.6 kg, length: 160 mm2.7 kg, length: 460 mm5.1 kg, length: 600 mmpulling claws with fork opening:13.7 x 18 mm, length: 105 mm12.7 x 19 mm, length: 130 mmslotted hexagon sockets, length: 100 mm, 12.5 mm (1/2“) drive: 25 - 27 - 28 - 29 - 30 mminjector extractor, sleeve design with shells: external Ø 35 mm, internal Ø 29 mmspind..
€245.98 €302.69 Ex Tax: €199.98
