Special Offers
BGS Technic Hydraulic Double Piston Foot Pump
suitable for all BGS hydraulic toolstwo step pressure rating:1. step: 13.8 bar (200 psi)2. step: 700 bar (10165 psi)oil capacity: 700 mloil volume per stroke1. step 13.0 ml2. step 2.8 mloil port thread: 10 mm (3/8") NPThose length 2.5 m Gross weight 13532 g..
€526.93 €649.69 Ex Tax: €428.40
BGS Technic Hydraulic Drive Shaft Puller Set | 125 - 215 mm
for pushing oout the prop shafts or removing the wheel hubstrong puller for cars, vans and vehicles with a bolt circle diameter of 125 - 215 mmespecially suitable for glued or rusty drive shaftspressure force of the hydraulic cylinder is 10 t, can be used with impact spindle instead (included)quick and easy adjustment of the pulling lefs and diametersuitable for wheel hubs with 3, 4, 5, and 6 holeshydraulic spindle 10 t, 1 1/2" thread and pressure tip, sliding handle with 22 mm hex drive, length..
€232.02 €270.94 Ex Tax: €188.63
BGS Technic Hydraulic Drive Shaft Puller Set | 98 - 125 mm
for extracting drive shafts from wheel hubsespecially for glued and rusty drive shaftsfits on 4- and 5-hole hubs with hole circle diameter of 98 to 125 mmfor wheel bolt sizes up to M14applicable for VW, Audi, Seat, Skoda, Opel / Vauxhall, Volvo, Fiat, Renault, Peugeot, Citroen, etc.capacity of hydraulic ram: 10 to.puller feet, internal thread 1-1/2“x16-UNhydraulic spindle, 10 t, internal thread 1-1/2“x16-UNextractor spindle, manual, external hexagon 19 mm, internal thread 11/16“x10-UNthread redu..
€147.58 €227.97 Ex Tax: €119.98
BGS Technic Hydraulic Drive Shaft Puller | 100 - 139.7 mm
hydraulic extractor for drive shafts facilitates the removal of stuck or rusted drive shaftshigh power efficiency due to hydraulic actuationhydraulic capacity 12 thydraulic spindle can be operated manually or with a ratchetrobust design for daily use in workshopssuitable for 3-, 4-, 5- and 6-hole hubs with bolt circle 100 - 139.7 mmsuitable for wheel studs up to M14suitable for larger cars, SUV and vans Gross weight 3720 g Material Steel (S45C)..
€227.50 €280.48 Ex Tax: €184.96
BGS Technic Hydraulic Drive Shaft Puller | 98 - 125 mm
hydraulic ram 12 tonespecially for glued and rusty drive shaftsfits on 4- and 5-hole hubs with hole circle diameter of 98 to 125 mmfor wheel bolt size up to M14for big cars, SUVs and light trucksspindle can be turned by hand or ratchet Gross weight 3438 g..
€357.98 €407.52 Ex Tax: €291.04
BGS Technic Hydraulic Hose with Coupling | 1.8 m
for use with e. g. BGS 1609max. pressure: 689 bar (10000 psi) Gross weight 1670 g Length 1,8 m..
€234.19 €248.20 Ex Tax: €190.40
BGS Technic Hydraulic Lifter | for Motorcyclses and ATV | 680 kg
suitable for motorcycles with underslung frame & ATVrubberized lifting frame Overall height 325 mm Width 360 mm Gross weight 27000 g Max. lifting height 420 mm Lifting height min. 145 mm Stroke 275 mm Length 865 mm Frame width 335 mm Frame length 325 mm Rated load capacity 680 kg..
€288.56 €350.23 Ex Tax: €234.60
BGS Technic Hydraulic Oil | minerally | 1 l
optimally alloyed mineral hydraulic oil with a high performance level and a wide range of applications within the entire industryoffers excellent wear protection even under extreme loads due to effective additivesis particularly characterized by good viscosity-temperature behavior, high aging resistance and reliable corrosion protectionuniversally applicable on all hydraulic systemsrecommended for hydraulic systems subject to high thermal loads with all types of high-pressure pumps, in sensitive..
€18.45 €20.60 Ex Tax: €15.00
BGS Technic Hydraulic Puller Set | 10 t | 25 pcs.
hydraulic ram 10 ton2 extension rodsone twin head and one triple head3 legs each in following lengths: 100, 150 und 200 mmmax. pulling width240 mm at 100 mm puller legs length280 mm at 150 mm puller legs length300 mm at 200 mm puller legs lengthclamping width (A) min. / max. in mm: min. 14 mm / max. 62 mmpuller bolt receiving thread (B): 5/8" x 18 UNFclamping bolt distance (C) in mm: 111 mmcamping bolt thread (D): 5/8" x 18 UNFpuller bolt distance (E) min. / max. in mm: min. 64 mm / max. 210 mm ..
€234.09 €358.94 Ex Tax: €190.32
BGS Technic Hydraulic Pump for BGS 1689 | 10 t
Gross weight 7230 g..
€141.89 €147.80 Ex Tax: €115.36
BGS Technic Hydraulic Pump for BGS 9790 | 10 t
powerful hydraulic hand pumphydraulic hosesuitable for hydraulic workshop press | 10 t (BGS 9790) Gross weight 6560 g Pressure capacity 10 t..
€249.25 €324.78 Ex Tax: €202.64
BGS Technic Hydraulic Workshop Press | 10 t
facilitates renewal of e. g. wheel bearings, gear shaft bearings, rubber bushings etc.large work area with individually adjustable supporting surface pressurebig pressure gauge range: 0 - 1000 psi (0 - 14500 bar)working range from 0 to 300 mm (adjustable in 3 steps)working pressure: 10 tstroke: 130 mm Width 400 mm Gross weight 49400 g Pressure capacity 10 t Height 1020 mm Length 690 mm..
€493.48 €580.29 Ex Tax: €401.20
BGS Technic Hydraulic Workshop Press | 20 t
facilitates renewal of e. g. wheel bearings, gear shaft bearings, rubber bushings etc.large work area with 9-way adjustable supporting surfacebig pressure gauge working: 0 - 14500 psi (0 - 1000 Bar)working range from 0 - 1030 mmoverall dimensions: (L x W x H) 710 x 550 x 1750 mmstroke: 150 mmnet weight 95 kg Width 550 mm Gross weight 94000 g Height 1750 mm Length 710 mm..
€734.36 €851.98 Ex Tax: €597.04
BGS Technic Hygiene Masks | 10 pcs.
one size fits allwith flexible rubber band Gross weight 34 g Packaging suitable for wall hanging Yes..
€6.09 €6.92 Ex Tax: €4.95
BGS Technic Ignition Coil Extractor for VAG
for dismantling of ignition coils, which are mounted directly on the spark plugsuitable for e.g. following models as of year 2013: VW Golf - Audi A3 - Seat Leon - Škoda Octavia with FSI 1.2, 1.4, 2.0 engines with timing chain Gross weight 78 g..
€34.69 €41.62 Ex Tax: €28.20
BGS Technic Ignition Coil Extractor Set | for VAG | 4 pcs.
for fast and safe assembly and removal of ignition coils with power output stageprevents damage to the coil and on the housingcovers most VAG models scope of delivery:ignition pullers with T-handle, to be used as OEM T10095 A suitable for: 6 cylinder & 5 cylinder injection engines, for following vehicles: VW Golf (> 1998), Passat (> 1997), Sharan (> 1996), Touareg (> 2003), Bora (> 1999), Eos 3.2L (> 2006), T5 3.2L (> 2004), Phaeton (> 2003), Audi A3 3.2L (> 2004), Audi TT 3.2L (1999-2007)igniti..
€65.44 €67.17 Ex Tax: €53.20
BGS Technic Ignition Coil Puller for VAG
for removing ignition coils on VAG models as of 2013pencil type for inserting in mounting hole of the ignition coilsuitable for 4 cylinder 1.2 / 1.4 / 1.8 / 2.0 FSI / TFSI engines, built in e. g. VW Golf, Audi A3, Seat Leon, Skoda Octaviato be used as OEM T10530 Gross weight 120 g Packaging suitable for wall hanging Yes To be used as OEM1 T10530 Audi To be used as OEM2 T10530 Volkswagen To be used as OEM..
€70.85 €68.06 Ex Tax: €57.60
BGS Technic Ignition Module Puller Set | for Opel | 2 pcs.
for the easy and gentle removal of Opel ignition coilssuitable for Opel 3- and 4- cylinder1.0-1.2-1.4-1.6-1.8-2.0-2.2 l petrol direct enginesinstalled in e. g. Agila-A, Astra-F, Astra-G, Astra-H,Astra-J, Calibra, Combo, Corsa-B, Corsa-C, Corsa-D,Frontera-A, Frontera-B, Insignia, Meriva-A, Meriva-B,Omega-B, Signum, Tigra-A, Tigra-B, Vectra-B, Vectra-C,Zafira-A, Zafira-Bengine codes:LDD, LDE, LLU, LUH, LUJ, 2HO, A10XEP, A14NEL, A14NET,A14XER, X14NZ, X14SZ, X14XE, A16LET, A16XER, X16SZR,X16XE, X16X..
€15.46 €21.24 Ex Tax: €12.57
BGS Technic Ignition Module Puller | for VAG
for the easy and gentle removal of VAG ignition coilssuitable for VAG engines 1.0-1.2-1.4 TSI / TFSI -2.0 GTIbuilt in:VW Up -2011, Polo -2012, Golf -2013, Beetle -2014, Caddy -2015, Passat -2014,Tiguan -2015, Touran -2015, Sharan -2015Audi A1 -2012, A3 -2013Seat Mii -2011, Ibiza -2013, Leon -2013Skoda Citigo -2011, Fabia -2014, Octavia -2013engine codes:CJZB, CJZA, CBZB, CJZD, CYVB, CTHD, CTHA, CZCA, CZDB,CZDA,CMBA,CPVA,CPCB,CHPACPTATA,CAXA,CAVA,CAPB,CAVD, CXSA, CDGA, CXEA, CTHD, CXSB, CMBA, CKM..
€36.78 €40.74 Ex Tax: €29.90
BGS Technic Ignition Timing Light | 12 V
for ignition timing adjustment and checkingsuitable for all 12-V petrol engines, where ignition time adjustment is technically possibleignition signal output via terminal for 1st Cylinderbright stroboscope lamp provides good readability of the ignition time marking Gross weight 618 g..
€61.47 €75.88 Ex Tax: €49.98
BGS Technic Impact Adaptor and Impact Ball Joint Set | 6.3 mm (1/4"), 10 mm (3/8"), 12.5 mm (1/2") | 11 pcs.
compact set compositiona practical helper whether for assembly and installation worksuitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringwith this set you always have the right adapter to keep in readinessfor covering various screwing applications, even in hard-to-reach areasrobust and durablethe tool is protected in the plastic compartment and stowed in the recess in a non-slip mannersafe and tidy storage in blow mold case..
€49.00 €67.85 Ex Tax: €39.84
BGS Technic Impact Adaptor and Universal Joint Set | 6.3 mm (1/4") - 25 mm (1") | 11 pcs.
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringincludes the following tools:Adaptor 6.3 mm (1/4“) drive - 10 mm (3/8")driveAdaptor 10 mm (3/8") drive - external square 6.3 mm (1/4")Adaptor 10 mm (3/8") drive - external square 12.5 mm (1/2")Adaptor drive 12.5 mm (1/2“) drive - external square 10 mm (3/8")Adaptor drive 12.5 mm (1/2“) drive - external square 20 mm (3/4")Adaptor drive internal square 20 mm (3/4") - external square 12.5 mm (1/2")Adaptor dri..
€82.41 €99.36 Ex Tax: €67.00
BGS Technic Impact Adaptor Set | 6 pcs.
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringincludes the following tools:1 adaptor 6.3 mm (1/4“) drive - external square 10 mm (3/8"), max. capacity 60 Nm1 adaptor 10 mm (3/8") drive - external square 6.3 mm (1/4"), max. capacity 60 Nm1 adaptor 10 mm (3/8") drive - external square 12.5 mm (1/2"), max. capacity 200 Nm1 adaptor 12.5 mm (1/2“) drive - external square 10 mm (3/8"), max. capacity 200 Nm1 adaptor 12.5 mm (1/2“) drive - external square 20 ..
€49.08 €47.67 Ex Tax: €39.90
BGS Technic Impact Ball Joint Set | 3 pcs.
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringScope of delivery:6.3 mm (1/4") drive |external square 6.3 mm (1/4")10 mm (3/8") drive | external square 10 mm (3/8")12.5 mm (1/2") drive | external square 12.5 mm (1/2") Gross weight 418 g Material Chrome Molybdenum Steel Packaging suitable for wall hanging Yes..
€45.26 €52.71 Ex Tax: €36.80
BGS Technic Impact Ball Joint Socket Set | 12.5 mm (1/2") Drive | 4 pcs.
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ringsizes: 16 - 17 - 18 - 19 mmsingle sizes available under BGS 5200-16, 5200-17, 5200-18, 5200-19includes the following tools:Impact ball joint socket, , 12.5 mm (1/2") drive 16 mmImpact ball joint socket, , 12.5 mm (1/2") drive 17 mmImpact ball joint socket, , 12.5 mm (1/2") drive 18 mmImpact ball joint socket, 12.5 mm (1/2") drive 19 mm Output profile Hexagon Dri..
€79.95 €67.61 Ex Tax: €65.00
BGS Technic Impact Ball Joint Socket | 12.5 mm (1/2") Drive | 16 mm
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring Output profile Hexagon Drive profile Internal square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 174 g Length 65 mm Material Chrome Molybdenum Steel Wrench size 16 mm..
€18.30 €16.67 Ex Tax: €14.88
BGS Technic Impact Ball Joint Socket | 12.5 mm (1/2") Drive | 17 mm
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring Output profile Hexagon Drive profile Internal square Drive profile size, inch 1/2 " Drive profile size, metric 12,5 mm Gross weight 186 g Length 65 mm Material Chrome Molybdenum Steel Wrench size 17 mm..
€15.99 €16.96 Ex Tax: €13.00
