Special Offers

BGS Technic Digital Calliper | 150 mm

extra large displayscale in mm/inch, reading 1/100 mmzero reset in any position, metric/inch conversion+/- displaybattery included (LR44)packed in plastic case Gross weight 409 g Material Stainless steel (4Cr13) Packaging suitable for wall hanging Yes..

€43.05 €38.38 Ex Tax: €35.00

BGS Technic Digital Clamp Meter

LCD display, 3 1/2-digit (up to 1999 count)reading rate: 3 reading/secpolarity indicationoverload indicationdimensions: (L x W x H) 193 x 73 x 25 mmweight: 145 g (incl. battery)power requirements: 2 x 1.5V (AAA)incl. storage bag, 2 measuring cables and 2 batteriesmeasuring ranges:DC voltage: 200 V / resolution: 100 mV, 600 V / resolution: 1 VAC voltage: 200 V / resolution: 100 mV, 600 V / resolution: 1 VAC current: 2000 mA / resolution 1 mA, 20 A / resolution 10 mA, 600 A / resolution 1 Aresista..

€33.21 €34.98 Ex Tax: €27.00

BGS Technic Digital Compression Tester for Petrol Engines

for compression measurement with hose adaptor or rubber-cone measuring tubespark plug thread adaptor: M10x1.0 - M12x1.25 - M14x1.25 - M18x1.563 mm gauge with LCD-displayswitchable units (psi, bar, kpa)pressure memory for up to 12 cyl.pressure range 0.1 - 20.6 bar (2.0 – 299.5 psi)resolution: 0.05 bar, 0.5 psi, 5 kpaautomatic zero pressure calibrationswitchable backlightautomatic off function, saves battery Battery type 1 x AAA | 1,5 V Gross weight 960 ..

€92.10 €104.53 Ex Tax: €74.88

BGS Technic Digital Current Tester for Fuse Contact

current measurements directly at the fuse box of cars and truckshelps to e. g. find "hidden" currentsapplication: to measure, remove the original fuse and connect the tester plugprotection of the circuit is still provided by a fuse in the testerplugs both for mini fuse and standard fuse socketssuitable for 12 V and 24 V systemsmax. current: 20 A Gross weight 102 g Packaging suitable for wall hanging Yes..

€55.35 €50.18 Ex Tax: €45.00

BGS Technic Digital Dial Gauge

switchable from inches to mmmeasuring range: 0 - 12.7 mm (1/2")reset button for 0-positionautomatic turn-offsuitable for standard measuring stands for e. g. BGS 1938clamping ~ 8 mm, hardened and polishedhardened ball tip Gross weight 252 g..

€84.87 €74.99 Ex Tax: €69.00

BGS Technic Digital Electronic Soldering Station

ideal for electricians, schools, car electricians and for development and productionsoldering iron holder and cleaning spongedigital LCD temperature display simultaneously shows the set and actual temperaturecompact designelectronic temperature controlreaches set temperature after a short timesecure, low operating voltage on soldering irontemperature pre-selection by 200°, 300°, 400° buttons, fine adjustment is done via + and - buttonsconversion button for switching the unit from °C to °Fpotenti..

€114.85 €146.76 Ex Tax: €93.38

BGS Technic Digital Laser Thermometer | -50 °C to +500 °C

accurately measures hot and cold temperaturesideal for various applications, helps to detect problems in car engines, heating and cooling systems, production and also in the food industryworks contactless by infrared lasertemperature range: -50 °C to +500 °C (-58 °F to +932 °F)accuracy +/- 1.5 %laser wave length: 8 - 14 um, laser class IIresponse time approx. 1 seconddistance to spot size D/S 12 : 1measuring range can be switched between: °C / °Fpower: 2 x 1.5V AAA- Batteries, not included in th..

€55.35 €55.51 Ex Tax: €45.00

BGS Technic Digital LCD Protractor with Level | 450 mm

for transferring and measuring anglesHOLD-function for holding the measured valuelighted LCD-displayworking range angle 0 to 220°resolution 0,1°angle precision +/- 0,5°2 vials (horizontal and vertical)aluminium housingincl. 9V battery Gross weight 579 g Packaging suitable for wall hanging Yes..

€66.30 €59.79 Ex Tax: €53.90

BGS Technic Digital Micrometer | 0 - 13 mm

for quick and easy determination of e.g. brake disc thickness, also suitable for all other measurementsmeasurement is carried out via spring mechanism, opens by pressing an opening leverresolution: 0.01 mm Gross weight 82 g Packaging suitable for wall hanging Yes..

€20.17 €22.58 Ex Tax: €16.40

BGS Technic Digital Micrometer | 0 - 25 mm

for precise measuring of e. g. shims at gears, valves, etc.measuring range: 0 - 25 mmdisplay resolution: 0.001 mmmeasuring resolution: +/- 4 µmmeasuring force: 5 - 10 Nincl. CR 2032 battery Gross weight 320 g..

€95.45 €106.89 Ex Tax: €77.60

BGS Technic Digital Multimeter

7-segment display, 12.5 mm, 3.5 numberssuitable for measurements in CAT II ranges such as household appliances with connectors, car electronics, etc.has the most common measuring ranges:DC voltage: 200 mV, 2000 mV, 20 V, 200 V, 600 VAC voltage: 200 V, 600 Vdirect current: 200 µA, 2000 µA, 20 mA, 200 mA, 10 Aresistance: 200 ohm, 2000 ohm, 20 kiloohm, 200 kiloohm, 2000 kiloohmdiode testtransistor test (hfe) via adaptorbattery info display shows if battery should be replacedoperating temperature: 1..

€19.96 €21.84 Ex Tax: €16.23

BGS Technic Digital Multimeter

3.5-digit LCDlow battery indicationoverload protectionmanual range selectionsafety sockets and plugsmeasuring ranges:DC voltage: 200 mV, 2000 mV, 20 V, 200 V, 250 VAC voltage: 200 V, 250 VDC current: 200 µA, 2000 µA, 20 mA, 200 mA, 10 Aresistance: 200 Ohm, 2000 Ohm, 20 kOhm, 200 kOhm, 2000 kOhmaudible continuity sounds under 50 Ohmdiode test with forward voltage reading Gross weight 236 g Packaging suitable for wall hanging Yes..

€36.65 €37.64 Ex Tax: €29.80

BGS Technic Digital Multimeter with Clamp for DC and AC Current

designed especially for the automotive sector, but can also be used in other areas3 - 3/4 digits LCD max. display value 3999battery: 2x 1.5 V AAA or similarlow battery indicatorstorage condition: from -10 °C to +50 °C, max. 85% RHdimensions: 194 x 71 x 38 mmweight: about 215 g (including batteries)suitable for category CAT IImeasuring ranges:AC and DC voltage measuring ranges: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 Vresistance: 400 Ohm, 4 KOhm, 40 KOhm, 400 KOhm, 4 MOhm, 40 MOhmAC and DC curre..

€115.72 €131.25 Ex Tax: €94.08

BGS Technic Digital Multimeter | 3 1/2-digit

shock resistant plastic protectionwith put-up hingeenergy-saving LCD displaydata hold buttompower supply: 9V block batterysuitable for measurements in CAT II areameasuring ranges:DC voltage: 200 mV - 2 V - 20 V - 200 V - 600 VAC voltage: 200 V - 600 Vresistance: 200 Ohm - 2-component Ohm - 20 KOhm - 200 KOhm - 2 MOhmDC current: 20 µA - 200 µA - 2 mA - 20 mA - 200 mA - 10 Adiode forward voltage Gross weight 439 g Packaging suitable for wall hanging Yes..

€50.74 €53.59 Ex Tax: €41.25

BGS Technic Digital Multimeter | 3 1/2-digit

suitable for measurements in CAT II area3 1/2 digit, 7 segments, 12.5 mm LCDindication for overflow, polarity and low battery voltagemeasuring ranges for resistance, AC voltage, DC voltage, diode voltage drop and hFE transistor measurementsoperating temperature: 10°C ~ 40°C, 0 ~ 75% relative humiditypower supply: 2x 1.5 V AAA batteryweight: 140 g (incl. battery)DC voltage measuring ranges:200 mV, resolution: 10 µV, accuracy: ±0.5% +10 digit2000 mV, resolution: 1 mV, accuracy: ±1% +5 digit20 V, r..

€22.02 €26.27 Ex Tax: €17.90

BGS Technic Digital Protractor

3 tools in one: protractor, inclinometer and levelextra large backlit LCD display for easier readingbeeper will sound at: 0° , 10° , 20° , 30° , 40° , 50° , 60° , 70° , 80° , 90°stores measured datadisplay automatically reads uprightdegree and slope conversionauto power off, low battery warningmeasuring range: 4 x 90°accuracy: 0.1°battery type: 3 V CR2032 x 3 pcs. (not included)operating temperature: 0°C - 40°Crelative humidity: 40% - 80% Width 50 mm Gross ..

€95.45 €97.15 Ex Tax: €77.60

BGS Technic Digital Stroboscopic Gun | for Gasoline and Diesel Engines

electronic angle adjustment allows precise flash of the markersespecially suitable for engines that have no angle mark on the pulleyfurther measurements are possible over the easy-to-read 7-segment display:dwell at 2, 3, 4, 5, 6 and 8-cylinder enginesvoltage and power loss testengine speedalso used for testing the start of diesel injectionsignal is picked up by a piezoelectric transducer to be mounted on the diesel linefiring angle: 0 to 60°drive speed: 200 to 9990 rpmdwell: 0 - 99.9%power suppl..

€460.69 €524.18 Ex Tax: €374.54

BGS Technic Digital Stroboscopic Gun | for Gasoline Engines

electronic angle adjustment allows for precise flash of the markersespecially suitable for engines that have no angle mark on the pulleyfurther measurements are possible over the easy-to-read 7-segment display:dwell at 2, 3, 4, 5, 6 and 8-cylinder enginesvoltage and power loss testengine speedfiring angle: 0 to 60°drive speed: 200 to 9990 rpmdwell: 0 - 99.9% Gross weight 916 g..

€203.69 €216.31 Ex Tax: €165.60

BGS Technic Digital Tachometer

digital displayphotoelectronicmeasuring range: 5 – 99,999 rpmaccuracy +0.05% +1din plastic case Gross weight 552 g..

€61.99 €53.15 Ex Tax: €50.40

BGS Technic Digital Thermometer with Stainless Steel Sensor Probe

wide range of applications, suitable for e.g. air conditioning, food processing, heating and ventilating, agriculture, automobile, photography, food storage, refrigeration, laboratory, etc.memory of the last measured valuelow battery displaysensor fault displayauto power off after 15 min.switch between °C and °Ftemperature range: -50°C to +300°C (-58°F ~ +572°F)temperature steps: 0.1 °Caccuracy: (-20°C - 80°C) +/- 1°Cpower: 1.5 V battery (LR44)length of probe: 125 mmincl. measuring tip protector..

€16.97 €21.84 Ex Tax: €13.80

BGS Technic Digital Torque Adaptor | 10 mm (3/8") | 27 - 135 Nm

suitable for tightening screw connections according to the specified torquecan be used as a torque attachment with any drive element such as a conventional reversible ratchetfor controlled clockwise and counterclockwise tighteningvery high measuring accuracy, documented with a test certificatelarge illuminated LCD displaydisplay mode: Track (concurrent display) and Peak (peak value detection)with automatic switch-off functionreaching the desired torque is indicated by an acoustic signal (buzzer)..

€117.49 €123.87 Ex Tax: €95.52

BGS Technic Digital Torque Adaptor | 12.5 mm (1/2") | 40 - 200 Nm

suitable for tightening screw connections according to the specified torquecan be used as a torque attachment with any drive element such as a conventional reversible ratchetfor controlled clockwise and counterclockwise tighteningvery high measuring accuracy, documented with a test certificatelarge illuminated LCD displaydisplay mode: Track (concurrent display) and Peak (peak value detection)with automatic switch-off functionreaching the desired torque is indicated by an acoustic signal (buzzer)..

€100.74 €129.33 Ex Tax: €81.90

BGS Technic Digital Torque Adaptor | 6.3 mm (1/4") | 6 - 30 Nm

suitable for tightening screw connections according to the specified torquecan be used as a torque attachment with any drive element such as a conventional reversible ratchetfor controlled clockwise and counterclockwise tighteningvery high measuring accuracy, documented with a test certificatelarge illuminated LCD displaydisplay mode: Track (concurrent display) and Peak (peak value detection)with automatic switch-off functionreaching the desired torque is indicated by an acoustic signal (buzzer)..

€117.49 €123.87 Ex Tax: €95.52

BGS Technic Digital Torque Wrench | 10 mm (3/8") | 27 - 135 Nm

for precise adjustment of the torquefine toothdigital displayalways shows current torque in display when workingmakes acoustic signal when reaching the preset torqueworks in both left and right directionaccuracy: +/- 2 %resolution: 0.1 Nmsize: 380 x 35 x 35 mmmemory capacity: 50 data setsmeasuring units: Kg-cm, Kg-m, Ib-in, Ib-ft, N-mbattery: 1.5V AAA (2 pcs)operation temperature: -10 °C ~ 60 °C (13.9°F ~ 139.9°F)operation humidity: 15 % ~ 90 %auto shut off after 80 seconds, when not in use ..

€177.12 €203.90 Ex Tax: €144.00

BGS Technic Digital Torque Wrench | 12.5 mm (1/2") | 40 - 200 Nm

for precise adjustment of the torquefine toothdigital displayalways shows current torque in display when workingmakes acoustic signal when reaching the preset torqueworks in both left and right directionaccuracy: +/- 2 %resolution: 0.1 Nmsize: 480 x 40 x 40 mmmemory capacity: 50 data setsmeasuring units: Kg-cm, Kg-m, Ib-in, Ib-ft, N-mbattery: 1.5V AAA (2 pcs)operation temperature: -10 °C ~ 60 °C (13.9°F ~ 139.9°F)operation humidity: 15 % ~ 90 %auto shut off after 80 seconds, when not in use ..

€184.50 €209.52 Ex Tax: €150.00

BGS Technic Digital Torque Wrench | 6.3 mm (1/4") | 6 - 30 Nm

for precise adjustment of the torquefine toothdigital displayalways shows current torque in display when workingmakes acoustic signal when reaching the preset torqueworks in both left and right directionaccuracy: +/- 4 %resolution: 0.1 Nmsize: 290 x 35 x 35 mmmemory capacity: 50 data setsmeasuring units: Kg-cm, Kg-m, Ib-in, Ib-ft, N-mbattery: 1.5V AAA (2 pcs)operation temperature: -10 °C ~ 60 °C (13.9°F ~ 139.9°F)operation humidity: 15 % ~ 90 %auto shut off after 80 seconds, when not in use ..

€169.74 €197.11 Ex Tax: €138.00

Special Offers

Everyday Welding Supplies, Ireland's No1!

Shopping Cart

Menu