Special Offers
BGS Technic Dead Blow Hammer | Soft Head | Ø 50 mm
for car body work and tire servicewith square bar steel handleserrated surface for secure gripnon-sparkling due to uniformly rubber coverspecial absorbing effect through steel balls in the hammer headsubstantially higher blow effect than in conventional hammeringfor conservative working with less recoil Gross weight 916 g Head diameter 50 mm Length 310 mm Stem length 250 mm..
€18.41 €21.09 Ex Tax: €14.97
BGS Technic Dead Blow Hammer | Soft Head | Ø 50 mm | 850 g
for car body work and tire servicewith filled square steel polyvinyl chloride composite handleserrated surface for secure gripfree of sparks due to uniformly rubber coverspecial absorbing effect through steel balls in the hammer headsubstantially higher blow effect than in conventional hammering for conservative working with less recoil Gross weight 1022 g Colour head/heads Black Head diameter 50 mm Head weigh..
€21.40 €28.49 Ex Tax: €17.40
BGS Technic Dead Blow Hammer | Soft Head | Ø 55 mm | 765 g
for car body work and tire servicewith thermoplastic rubber (TPR) polypropylene (PP) composite handlesteel-reinforced handlerubberized surface for secure gripspecial absorbing effect through steel balls in the hammer headsubstantially higher blow effect than in conventional hammeringfor conservative working with less recoil Gross weight 842 g Colour head/heads Blue Handle type 2 component handle Head diameter ..
€34.32 €35.36 Ex Tax: €27.90
BGS Technic Dead Blow Hammer | Soft Head | Ø 60 mm | 1300 g
for car body work and tire servicewith steel pipe handle with rubber coveringserrated surface for secure grip free of sparks due to uniformly rubber coverspecial absorbing effect through steel balls in the hammer headsubstantially higher blow effect than in conventional hammering for conservative working with less recoil Gross weight 1306 g Colour head/heads Black Head diameter 60 mm Head weight 1300 g ..
€43.05 €44.28 Ex Tax: €35.00
BGS Technic Dead Blow Hammer | Soft Head | Ø 65 mm | 1275 g
for car body work and tire servicewith thermoplastic rubber (TPR) polypropylene (PP) composite handlesteel-reinforced handlerubberized surface for secure gripspecial absorbing effect through steel balls in the hammer headsubstantially higher blow effect than in conventional hammeringfor conservative working with less recoil Gross weight 1328 g Colour head/heads Blue Handle type 2 component handle Head diameter..
€39.24 €39.79 Ex Tax: €31.90
BGS Technic Deburring Tool
blade rotates 360° in handle, thus ideally suitable for deburring holes Gross weight 52 g Handle type 2 component handle Blade length 47 mm Length 135 mm Packaging suitable for wall hanging Yes..
€17.68 €26.57 Ex Tax: €14.38
BGS Technic Decoration Clip Assortment | transparent | 20 pcs.
suitable for fairy lights, decoration material, etc.demage-free hangig without drillingsticks to all smooth surfaces like windows, cupboards, controlsself-adhesivedamage-free hanging without drillingremovable without residuemax. load bearing capacity: 200 g (per clip)scope of delivery: 20 clips and 24 adhesive pads Width 13 mm Gross weight 26 g Colour Transparent Height 18 mm Packaging suitable for wall ..
€4.43 €4.56 Ex Tax: €3.60
BGS Technic Deep Hole Pipe Spanner Set | 6 - 22 mm | 11 pcs.
both ends with hexagon socketseach size with a straight and an angled endscope of delivery:L-type socket wrench 6 mmL-type socket wrench 7 mmL-type socket wrench 8 mmL-type socket wrench 10 mmL-type socket wrench 11 mmL-type socket wrench 12 mmL-type socket wrench 13 mmL-type socket wrench 14 mmL-type socket wrench 17 mmL-type socket wrench 19 mmL-type socket wrench 22 mm Output profile Hexagon Gross weight 3182 g Material Chr..
€84.62 €98.03 Ex Tax: €68.80
BGS Technic Deep Hole Pipe Spanner Set | 8 - 19 mm | 12 pcs.
especially suitable for stud bolts and deep nuts on threaded rods, where a normal ring wrench in offset design cannot be usedsolid design with two hexagonal socketswith deep hole above the hexagon socket on the 90° offset sidefor insertion of pivot pinsfacilitates work due to leverage effectcold forgedin tetron pouchmaterial: chrome vanadium steelsurface finish: satin chrome plateddrive profile: hexagonscope of delivery:1 deep hole pipe wrench, hexagon, 8 mm, length 118 mm1 deep hole pipe wrench..
€78.41 €88.52 Ex Tax: €63.75
BGS Technic Delivery Tip for Grease Gun
can be used with air hosethread 1/8" PT Gross weight 42 g Packaging suitable for wall hanging Yes..
€4.13 €8.11 Ex Tax: €3.36
BGS Technic Delivery Tip for Grease Gun
can be used with air hosethread M10 x 1.0 Width 64 mm Gross weight 34 g Height 19 mm Length 87 mm Material Carbon Steel Packaging suitable for wall hanging Yes..
€5.90 €4.27 Ex Tax: €4.80
BGS Technic Delivery Tip for Grease Gun | angled
for use with pressure hosethread 1/8" PT90 ° angledfor use with grease nipple and grease gun Gross weight 112 g Packaging suitable for wall hanging Yes..
€13.28 €14.60 Ex Tax: €10.80
BGS Technic Demo Block for Hex Wrench Set | for BGS 8512
for demonstration of benefits of BGS 8512 Width 170 mm Gross weight 540 g Height 30 mm Length 40 mm Material Chrome Vanadium Steel Packaging suitable for wall hanging Yes..
€47.97 €48.71 Ex Tax: €39.00
BGS Technic Demo Block for Multi Socket
for demonstration of benefits of Multi Socket, 10 mm (3/8") drive, 9 - 21 mm, BGS 2533 or Multi Socket, 12.5 mm (1/2") drive, 11 - 32 mm, BGS 2531 Gross weight 800 g..
€98.15 €147.65 Ex Tax: €79.80
BGS Technic Demo Block | for Gear Lock Sockets
to demonstrate the multiple uses of the Gear Lock profilethe supplied nut (19 mm) fits perfectly on all permanently installed screw heads: hexagonal, 12-point, inch, E-profile, square, multi-tooth and finished nuts with a damaged flank Gross weight 980 g..
€157.24 €157.39 Ex Tax: €127.84
BGS Technic Dent Mirror | Ø 800 mm
ideal for better identification of dents and bumps, e.g. hail damage, stone-chipping or small parking damagesasymmetric lines for presice detection of minor deformationssuitable for mobile use, folds in secondsin practical storage pouch Ø 300 mmwith plastic handle Gross weight 468 g..
€90.77 €95.08 Ex Tax: €73.80
BGS Technic Dent Removal Pen
for pushing out small dents, e.g. hail damage, etc.made of plastic, front rounded Gross weight 36 g Diameter 18 mm Length 120 mm Material Plastic..
€3.94 €5.60 Ex Tax: €3.20
BGS Technic Dent Repair Handle
to removing dentssuitable for dent repair pads BGS 874 Gross weight 116 g..
€30.75 €30.85 Ex Tax: €25.00
BGS Technic Dent Repair Kit
for inexpensive dent repairScope of delivery:hot melt glue gun with 2 glue stick pieces1 plastic scraper for removing glue1 soft panel beating pen1 soft dent removal pensolvent Gross weight 604 g..
€27.64 €35.72 Ex Tax: €22.48
BGS Technic Dent Repair Kit with Sliding Hammer | 11 pcs.
universal sliding hammer 3 kgfor dent pulling9 different hooks and accessoriessliding hammer thread: 7/8" x 14 UNF Gross weight 7938 g..
€83.62 €109.25 Ex Tax: €67.98
BGS Technic Dent Repair Kit with Sliding Hammer | 9 pcs.
sliding hammer 2 kgshaft manufactured from solid metalwith soft plastic handleincl. various adaptorssliding hammer thread: 5/8" x 18 UNF Gross weight 3216 g..
€84.13 €75.88 Ex Tax: €68.40
BGS Technic Dent Repair Pads | for BGS 865 | 12 pcs.
suitable for BGS 865also suitable for BGS 865-6 and 865-7includes the following pads:round, adhesive surface convex: Ø 15 - 20 - 25 mmround, adhesive surface straight: Ø 32 - 36 - 42 mmoval, adhesive surface straight: 23 x 34 - 28 x 41 - 33 x 48 mmrectangle, adhesive surface straight: 20 x 30 - 23 x 35 - 32 x 49 mm Gross weight 48 g..
€24.48 €26.27 Ex Tax: €19.90
BGS Technic Dent Repair Pads | for BGS 865 | 6 pcs.
suitable for BGS 865, BGS 865-6 and 865-7scope of delivery:1 dent repair pad, rectangular, large: 32 x 16 mm1 dent repair pad, round, large: diameter Ø 32 mm1 dent repair pad, round, middle: diameter Ø 19 mm1 dent repair pad, round, small: diameter Ø 13 mm1 dent repair pad, oval: 32 x 13 mm1 dent-pad, star-shaped: max. Ø 14 mm Gross weight 80 g Length 22 mm Material Aluminium..
€28.29 €30.70 Ex Tax: €23.00
BGS Technic Dent Repair Set | 12 pcs.
for pushing out small dents, e.g. hail damage, etc.2 Retainer plates 155 mm long1 aluminium handle 90 mm long1 aluminium handle 130 mm longwith following interchangeable heads:1 cylinder form Ø 16 mm, 56 mm long1 cylinder form, tapered, Ø 6 mm, 56 mm long1 wedge shape, round, 8 x 16 mm, 56 mm long1 wedge shape, square, 8 x 16 mm, 56 mm long1 wedge shape, round, 4 x 16 mm, 56 mm long1 wedge shape, square, 4 x 16 mm, 56 mm long1 conical, sharp, 56 mm long1 conical, round, 56 mm long ..
€126.94 €143.21 Ex Tax: €103.20
BGS Technic Dent Repair Sliding Hammer Set
460 mm sliding hammer with adaptor head for pads,sliding hammer weight: For up to 180 gadaptor head thread: M12 x 1.75material: aluminum, anodisedincludes the following pads:round, adhesive surface convex: Ø 15 - 20 - 25 mmround, adhesive surface straight: Ø 32 - 36 - 42 mmoval, adhesive surface straight: 23 x 34 - 28 x 41 - 33 x 48 mmrectangle, adhesive surface straight: 20 x 30 - 23 x 35 - 32 x 49 mm Gross weight 1076 g..
€96.43 €104.67 Ex Tax: €78.40
BGS Technic Denting Iron Set | 23 pcs.
suitable for removing dentsincludes irons with round, flat, point and ball headsmade of 5 to 14 mm round stainless steel45° up to 135° bent headslength: 250 mm to 1150 mmPVC dipped handlesin aluminum transport casewith strip holders for denting irons Gross weight 18700 g..
€717.63 €835.00 Ex Tax: €583.44
BGS Technic Denting Iron Set | 30 pcs.
suitable for removing dents, ideal even with hail damageallows repair of dents without paintingno need to disassemble car body partsdisassembly of panels is rarely necessaryrepair costs can be kept low, no painting costset consists of all bumping tools needed in various lengths and shapesmade of stainless and carbon steelalso contains air inflating pillow, trim strip wedge and other parts Gross weight 8082 g..
€316.16 €355.40 Ex Tax: €257.04
BGS Technic Denting Iron Set | 8 pcs.
for the removal of dents in a car’s body without damaging the finishideal for removing small dents and damaging caused by hailmade of stainless steelvarious head formsdelivered in a handy carrying casescope of delivery:2 half-round bars 210 / 220 mm1 round bar 420 mm1 half-round pointed bar 600 mm2 angled ball-headed bars 460 / 1000 mm, plastic head with M5 x 0.81 thread1 pointed bar 500 mm1 special-type hooked bar 1070 mm Gross weight 852 g..
€215.79 €252.33 Ex Tax: €175.44
BGS Technic Derailleur Hanger Alignment Tool
for easy measuring and straightening of bent derailleur hangersdeviations can be corrected and controlled by pulling or pushing the leverprecise measurement with numerical scalemeasuring tip with rotatable scale for easy handling and readability in any positionnarrow thread output shaft for use on many wheelssuitable for wheels from 20 - 29"external thread output shaft (derailleur hanger): M10 x 1.0 Gross weight 1166 g Length 420 mm Materi..
€228.84 €280.48 Ex Tax: €186.05
BGS Technic Diagonal Side Cutters | Stripper function | 165 mm
with solid 2-component soft grip handlesred/blackstripping function 1.5 mm..
€9.74 €10.02 Ex Tax: €7.92
