Special Offers
BGS Technic Compressed Air Pressure Reducer | max. 10 to 6.3 bar
supplies a constant 6.3 bar outlet pressure regardless of the inlet pressureprevents excessive operating pressure and is suitable for most pneumatic toolssaves energy and increases the service life of compressed air toolslight and compact designno additional pressure gauge requiredinlet pressure max.: 10 bar (145 PSI)outlet pressure: constant 6.3 bar (90 PSI)accuracy: 10 %flow rate: 1300 l/min (45 CFM)inlet thread: 6.3 mm (1/4")outlet thread: 6.3 mm (1/4") Gross weight 1..
€77.93 €81.14 Ex Tax: €63.36
BGS Technic Compression / Pressure Loss Adapter | for Citroen, Jaguar, Peugeot, Volvo
suitable for compression tester products 8008, 8400, 8401M8 x 1.0length 122 mm Gross weight 48 g..
€26.08 €23.62 Ex Tax: €21.20
BGS Technic Compression / Pressure Loss Adapter | for FIAT Ducato
suitable for compression tester products 8008, 8400, 8401M8 x 1.0length 96 mm Gross weight 44 g..
€26.08 €23.62 Ex Tax: €21.20
BGS Technic Compression / Pressure Loss Adapter | for Ford, PSA, Jaguar, Mazda
suitable for compression tester products 8008, 8400, 8401M8 x 1.0length 81 mm Gross weight 42 g..
€26.08 €23.62 Ex Tax: €21.20
BGS Technic Compression / Pressure Loss Adapter | for Mercedes-Benz
suitable for compression tester products 8008, 8400, 8401M8 x 1.0length 112 mm Gross weight 47 g..
€26.08 €23.62 Ex Tax: €21.20
BGS Technic Compression / Pressure Loss Adapter | for VAG
suitable for compression tester products 8008, 8400, 8401M8 x 1.0length 105 mm Gross weight 44 g..
€26.08 €23.62 Ex Tax: €21.20
BGS Technic Compression Tester for Diesel Engines
included various adaptors (for glowplugs and injector nozzles) make this kit useful for many car typessuitable for nearly all brands, such as: BMW, Mercedes-Benz, Ford, VW, Toyota, Renault, Volvo, Mazda, PSA, Opel, Nissan, Vauxhallscope of delivery:1 manometer 0 - 70 bar, accuracy +/- 5%1 angled adaptor5 glow plug adaptors:M10 x 1.25 mm, 114.5 mm longM10 x 1.0 mm, 119 mm longM10 x 1.25 mm, 73.5 mm longM12 x 1.25 mm, 54 mm longM14 x 1.25 mm, 72 mm long3 injector adaptors:M20 x 1.5 mm, 78 mm longM..
€127.82 €129.48 Ex Tax: €103.92
BGS Technic Compression Tester for Diesel Engines
for testing the compression on diesel enginesallows professional examination and assessment of the engine conditionincludes test tools for many vehicle modelsScope of delivery:pressure gauge 70 bar, with 500 mm hoseglow plug adaptor, M8 x 1.0, length: 104 mmglow plug adaptor, M10 x 1.0, length: 84 mmglow plug adaptor, M10 x 1.0, length: 92 mmglow plug adaptor, M10 x 1.0, length: 113 mmglow plug adaptor, M10 x 1.0, length: 120 mmglow plug adaptor, M10 x 1.25, length: 65 mmglow plug adaptor, M10 x..
€86.08 €116.79 Ex Tax: €69.98
BGS Technic Compression Tester for Petrol and Diesel engines
compression pressure testing up to 50 bar (725 psi) possiblequick coupling in straight or angled versionscope of delivery:glow plug adaptors for the following brands: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Isuzu, Land Rover, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall and Volvoinjector adaptors M20, M22, M24 and Stanadyne injectors for Fordspark plug adaptors M10, M12, M14 and M18suitable for most cars, trucks, buses, agricultural ..
€700.90 €824.22 Ex Tax: €569.84
BGS Technic Compression Tester Kit for Petrol Engines
for compression measurements with hose adaptor or rubber-cone measuring tubespark plug thread adaptor:M10x1.0 - M12x1.25 - M14x1.25 - M18x1.5analogous pressure gaugepressure gauge scale: 0 - 300 psi / 0 - 2000 kpa (0-20 bar)with pressure release valvescope of delivery:pressure gauge with quick coupling & pressure release valveconnecting hose with quick couplercompression test pipe, angled typecompression test pipe, straight typespark plug thread adapter M18 x 1.5spark plug thread adapter M14 x 1..
€57.81 €57.58 Ex Tax: €47.00
BGS Technic Compression Tester | M10 + M14
suitable for motorcycles and cars with M10 mm or M14 mm spark plug300 mm long, flexible test hoselarge (Ø 70 mm) easy to read scale - accuracy: +/- 3%gauge range: from 0 to 21 bar / 21.5 kg/cm² / 300 PSIblow off valveto probe engine valve and piston ringsApplication: Shut down power of ignition coil before working with this tool! Gross weight 314 g..
€39.24 €39.26 Ex Tax: €31.90
BGS Technic Compression Tester | M14 + M18
suitable for motorcycles and cars with M14 mm or M18 mm spark plug300 mm long, flexible test hoselarge (Ø 70 mm) easy to read scale - accuracy: +/- 3%gauge range: from 0 to 21 bar / 21.5 kg/cm² / 300 PSIblow off valveto probe engine valve and piston ringsApplication note: Shut down power of ignition coil before working with this tool! Gross weight 332 g Packaging suitable for wall hanging Yes..
€39.24 €39.26 Ex Tax: €31.90
BGS Technic Concrete Drill Set | 4 - 10 mm | 5 pcs.
in plastic caseScope of delivery:Concrete drill Ø 4 mmConcrete drill Ø 5 mmConcrete drill Ø 6 mmConcrete drill Ø 8 mmConcrete drill Ø 10 mm Gross weight 138 g Packaging suitable for wall hanging Yes..
€7.68 €7.81 Ex Tax: €6.24
BGS Technic Cone Cutter Set | HSS | 3 Sizes | 3 pcs.
size 1: 3 - 14 mmsize 2: 8 - 20 mmsize 3: 16 - 30.5 mm Gross weight 476 g Packaging suitable for wall hanging Yes..
€40.59 €38.08 Ex Tax: €33.00
BGS Technic Connector Assortment | 350 pcs.
for repairing of existing cabling and for new wiring with splash water protected and dustproof connectorsincludes the following connector parts:50 green F1.0 wire seals for outer diameter 1.2 - 1.8 mm50 yellow F1.4 wire seals for outer diameter 1.6 - 2.4 mm50 male terminals for cable cross section 0.3 - 0.5 mm..
€166.10 €171.12 Ex Tax: €135.04
BGS Technic Connector Assortment | 425 pcs.
for repairing of existing cabling and for new wiring, with splash water protected and dustproof connectorswire seal material: silicone, seal outer diameter: 5.1 mmterminal material: brasshousing material: PA66+GFtemperature range: -40 to 120..
€47.36 €46.94 Ex Tax: €38.50
BGS Technic Connector for BGS 62650 | M12 x 1.5 mm
suitable for tester for diesel injector sockets BGS 62650 Gross weight 74 g..
€79.95 €79.57 Ex Tax: €65.00
BGS Technic Connector for BGS 62650 | M14 x 1.5 mm
suitable for tester for diesel injector sockets BGS 62650 Gross weight 76 g..
€79.95 €79.57 Ex Tax: €65.00
BGS Technic Connector R123, R124 for BGS 8027, 8098 | black
Gross weight 64 g..
€7.68 €8.99 Ex Tax: €6.24
BGS Technic Connector R123/R125 for BGS 8027, 8098 | blue
Gross weight 54 g..
€7.68 €8.99 Ex Tax: €6.24
BGS Technic Contour Gauge | 250 mm
for quickly copying and transferring bodywork contoursuseful for for carpenters and for modellingwith 4 magnets on the reversemax. measuring depth: 30 mmmax. measuring width: 260 mm Width 282 mm Gross weight 477 g Length 105 mm..
€22.63 €25.53 Ex Tax: €18.40
BGS Technic Contour Gauge | 250 mm | lockable
for quickly copying and transferring bodywork contourssuitable for carpenters and model builderslockable, no unintentional adjustment after transferring the contourwith 4 magnets on the back sidemax. measuring depth: 30 mmmax. measuring width: 255 mm Width 282 mm Gross weight 460 g Length 105 mm Material ABS plastic..
€45.51 €39.26 Ex Tax: €37.00
BGS Technic Contour Gauge | 510 mm
for quickly copying and transferring bodywork contoursuseful for for carpenters and for modellingwith 8 magnets on the back sidemax. measuring depth: 30 mmmax. measuring width: 510 mm Width 535 mm Gross weight 901 g Length 105 mm..
€43.05 €39.56 Ex Tax: €35.00
BGS Technic Contour Gauge | metal | 125 mm
for quickly copying and transferring bodywork contoursuseful for for carpenters and for modellingmax. measuring depth: 30 mmmax. measuring width: 125 mm Gross weight 144 g Length 125 mm Material Metal Packaging suitable for wall hanging Yes..
€5.90 €6.63 Ex Tax: €4.80
BGS Technic Contrast Agent for Leak Detectors / Leak Tester | 250 ml | for BGS 8037
suitable for BGS 8037 Gross weight 255 g Content 250 ml..
€62.73 €60.82 Ex Tax: €51.00
BGS Technic Control Arm Supporting Tool
for supporting, raising and lowering the wheel bearing housing (pivot bearing) via the wheel studsenables exact positioning of the heightindispensable tool for disassembly and assembly of suspension struts and suspension jointssuitable for use with a transmission jack with maximum piston diameter of 30 mm Gross weight 1056 g..
€162.36 €177.12 Ex Tax: €132.00
BGS Technic Convex Mirror | Ø 450 mm
perfect companion in hard-to-see places and blind spotsround shape with flexible, curved mirror surfacefor use in parking lots, driveways, warehouses, supermarkets and other areasalso recommended for viewing remote areas in larger sales areas such as gas stations, kiosks or retail storesfor indoor and outdoor useinsensitive to frost, hail, heat, strong wind and sunmirror backside in light red signal colorwith separate screw bracket for mounting on posts Ø 50 - 60 mmincl. bracket with hinge techn..
€89.79 €84.10 Ex Tax: €73.00
BGS Technic Coolant Liquid | 3 l | for BGS 2170
suitable for induction heater BGS 2170 Gross weight 3200 g..
€85.02 €97.88 Ex Tax: €69.12
BGS Technic Coolant Thermostat Wrench | for VAG
for removal and installation of the coolant thermostatsuitable for the following vehicle models:Audi A3 (2013-) and Volkswagen Golf (2013-) 1.4 l direct injection with turbochargerto be used like OEM T10508 Drive profile Internal square Drive profile size, inch 3/8 " Drive profile size, metric 10 mm Gross weight 80 g Material Chrome Molybdenum Steel Surface finish Nickel plated ..
€40.59 €44.22 Ex Tax: €33.00
BGS Technic Cooler Adaptor for BGS 8514 | for DAF-XF 95, XF 105
for truck cooling system tester BGS 8514suitable for: DAF-XF 95, XF 105 Gross weight 220 g..
€57.81 €58.31 Ex Tax: €47.00
