Special Offers

BGS Technic Bearing and Bush Driver Set | XXL | 21 pcs.

suitable for mounting bearings and sealing ringsparticularly useful when used with a hydraulic pressscope of delivery:17 mounting pads Ø 70 to 150 mm (5 mm steps)273 mm metal handle for use with a hammer Gross weight 19194 g Material Carbon steel..

€225.83 €273.45 Ex Tax: €183.60

BGS Technic Bearing Assembly Tool Set | for Motorcycles

for smooth assembling of wheel bearings, steering head bearings and other bearingsincluding tools for following diameter sizes 32 - 36 - 38 - 42 - 46 mmsuitable for Kawasaki, Honda and Harley Davidsonscope of delivery:1 press nut with crank1 mounting screw1 nylon washer2 step rings for Kawasaki2 step rings for Honda1 step ring for Harley Davidson1 washer plate1 pressure washer Gross weight 5151 g Material Carbon steel Surface finish Sa..

€325.36 €380.06 Ex Tax: €264.52

BGS Technic Bearing Cup Press Tool | for 1" to 1.1/2" Bearing Cups

for pressing the upper and lower bearing cup into the head set tube of the bicycle frame, as well as bearing cups into threadless bottom bracket shellsquick adjustment of the draw-in length through the draw-in spindle with 9 grooves and pressure piece with quick lock functionsuitable for bearing cups in sizes 1" - 1.1/8" - 1.1/4" - 1.1/2"scope of delivery:spindle nut with handlestep pressure piece without lock, Ø 25 - 29.5 - 32.5 - 39 - 50 mmspindle with 9 adjusting grooves, Ø 18 mmstep pressure..

€286.22 €339.60 Ex Tax: €232.70

BGS Technic Bearing for BGS 67301

suitable for BGS 67301 Gross weight 122 g..

€13.28 €13.27 Ex Tax: €10.80

BGS Technic Bearing Inner Ring Puller, 2-arm | for VW, Audi

for removing the inner bearing ring on wheel hubspressure piece for support on the wheel hub stumppre-tension bracket ensures a secure hold on the bearing ringsuitable for VW and Audi models Gross weight 1752 g..

€111.98 €132.82 Ex Tax: €91.04

BGS Technic Bearing Puller Set | 10 pcs.

max. puller depth 200 mmclamping width: 20 - 100 mminterchangeable heads Ø 5.5 - 6 - 8 mm Gross weight 1163 g..

€65.19 €57.43 Ex Tax: €53.00

BGS Technic Belt Gauge

for adjusting initial tension of the drive beltcan be used for all types of cars as long as technical specifications on recommended tension is provided1 rotation of the adjusting nut changes the piston load approx. 10 Ntension can be read on front and back side of the tool Gross weight 368 g Packaging suitable for wall hanging Yes..

€52.89 €46.05 Ex Tax: €43.00

BGS Technic Belt Pulley Counterholding Wrench

suitable for VW 1.4 / 1.6 / 2.0 l engines (engine codes ADX, AEA, AEE, AEH, AEX, AFH, AFK, AGP,AGR, AHW, AJM, AKL, ALN, AMF, ANA, ANY, APE, APF,ARM, ATJ, AUA, AWH)for counterholding the belt pulley of 4-valve engines with pin diameter 11.5 mmalso for counterholding the belt pulley of 2-valve enginessuitable for the following models:VW: Beetle, Bora, Caddy, Golf, Lupo, Polo, Sharan, Touran, TransporterAudi: A2 / A3 / A4 / A6, TTSkoda: Fabia, Octavia, Superb Gross weight 2..

€84.13 €91.54 Ex Tax: €68.40

BGS Technic Belt Pulley Counterholding Wrench | for BMW M52TU / M54 / M56

for holding the crankshaft pulley while loosening or tightening the middle pulley boltallows safe and damage-free removal / installation Gross weight 4618 g To be used as OEM1 11 8 190 | 11 8 200 | 11 8 210 BMW..

€234.19 €242.15 Ex Tax: €190.40

BGS Technic Belt Pulley Counterholding Wrench | for BMW M52TU / M54 / M56

for holding the crankshaft pulley while loosening or tightening the middle pulley boltallows safe and damage-free removal / installationto be used with 12.5 mm (1/2") ratchet, sliding T-bar, etc. Gross weight 3458 g To be used as OEM1 11 8 190 | 11 8 200 | 11 8 210 BMW..

€194.83 €217.78 Ex Tax: €158.40

BGS Technic Belt Pulley Puller | Universal

allows easy removal of the crankshaft pulley, provides a counterholding function to prevent rotation of the crankshaftcounter holder with 12.5 mm (1/2") drivevariable mounting distance 54 - 120 mmincludes fastening screws M8 and M10 Gross weight 1218 g..

€106.27 €114.87 Ex Tax: €86.40

BGS Technic Belt Pulley Wrench for Ribbed and Flat Drive Belts

for holding back ribbed drive belt pulleys (for example when loosening belt pulley bolts) Gross weight 572 g Packaging suitable for wall hanging Yes..

€79.95 €72.93 Ex Tax: €65.00

BGS Technic Belt Pulley Wrench for Ribbed Belts | for BMW N54 / N55

for replacing the serpentine beltsboth ends with T-Star (for Torx) T60suitable for BMW engines N54 / N55material: S45 Steel Gross weight 1326 g Material Steel (S45C)..

€71.22 €73.66 Ex Tax: €57.90

BGS Technic Belt Pully Wrench for V-Belt Pulleys

for assembly of pulleys (counterholder)universally applicable850 mm long strap Gross weight 568 g Packaging suitable for wall hanging Yes..

€54.12 €54.03 Ex Tax: €44.00

BGS Technic Belt Tensioner Pulley Wrench | for Mercedes-Benz M270

extra slim design for tensioning the V-ribbed belt tensioning armsuitable for tensioning pulleys with OE part number: A2702000070, A2702000170, 2702000370 and similarsuitable for Mercedes-Benz M270 enginesto be used like OEM W270589000700installed in the following vehicle models:Mercedes-Benz A-Class (W176) A160, A180, A200, A220, A250, A45 AMGMercedes-Benz A-Class (W177) A220, A250Mercedes-Benz B-Class (W242) B160, B180, B200, B220, B250Mercedes-Benz B-Class (W246) B160, B180, B200, B220, B250M..

€24.11 €29.46 Ex Tax: €19.60

BGS Technic Belt tensioner Wrench | for Ford Duratorq Engines

suitable for Ford Duratorq 2.0 / 2.2 (TDDI / TDCI) engine codes: D5BA / D6BA / HJBA / HJBC / FMBA / N7BA / QJBB / QJBA Gross weight 598 g..

€49.69 €51.81 Ex Tax: €40.40

BGS Technic Belt Tensioner Wrench | for Opel / Vauxhall, Chevrolet

for releasing the belt tensioner and renewing the drive beltto be used as OEM EN-44811suitable for the following models:Opel, Vauxhall, Chevrolet, Pontiac, etc. Output profile External square Output profile size 9,4 mm Gross weight 380 g Length 310 mm To be used as OEM1 EN-44811 Chevrolet To be used as OEM2 EN-44811 Opel To be used as OEM3 EN-44811 Pontiac ..

€26.08 €32.47 Ex Tax: €21.20

BGS Technic Bench Vice Clamping Tool | for Struts

for clamping MC Pherson struts in bench vicesfacilitates working on spring and shock absorbersprotective rubber jaws prevent damage to the strutsuitable for fixed mounting on the workbenchtensioning range: 34 mm - 68 mm Gross weight 3744 g Material Carbon steel (S45) Surface finish Phosphated..

€196.70 €209.96 Ex Tax: €159.92

BGS Technic Bench Vice Jaw Protector Set | Aluminium | 100 mm | 8 pcs.

with magnets for firm grip on vicefor gentle clamping2 longitudinal profile jaws for clamping e.g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and boltsmade of aluminumsize: 100 x 25 mm Gross weight 728 g..

€44.28 €38.97 Ex Tax: €36.00

BGS Technic Bench Vice Jaw Protector Set | Aluminium | 125 mm | 8 pcs.

with magnets for firm grip on vicefor gentle clampingmade of aluminumsize: 125 x 25 mmscope of delivery:2 longitudinal profile jaws for clamping e. g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and bolts1 tetron wallet Gross weight 868 g..

€45.97 €50.92 Ex Tax: €37.38

BGS Technic Bench Vice Jaw Protector Set | Aluminium | 150 mm | 8 pcs.

with magnets for firm grip on vicefor gentle clampingmade of aluminumsize: 150 x 25 mmscope of delivery:2 longitudinal profile jaws for clamping e. g. threaded rods, bolts, etc.2 jaws with longitudinal and transverse profile2 jaws with plastic cover for clamping fragile workpieces2 jaws with rubber plate for clamping very sensitive workpieces, such as aluminium threaded rods and bolts1 tetron wallet Gross weight 1020 g..

€52.12 €58.31 Ex Tax: €42.38

Special Offers

Everyday Welding Supplies, Ireland's No1!

Shopping Cart

Menu