Special Offers

BGS Technic Ball Joint Ejector Set | 23 - 28 - 34 mm | 3 pcs.

for ejecting the ball joint out of axle legs, drop arms, stabilisersejectors are universally usable, fit e. g. Mercedes-Benz, VAG and Opelespecially for working in narrow spaceasuitable only for working on closed joints or joints with centre holesizes: 23x55, 28x55, 34x63 mm Gross weight 3699 g..

€143.57 €154.59 Ex Tax: €116.72

BGS Technic Ball Joint Ejector Set | 23 - 28 - 34 mm | 3 pcs.

for easy and quick removal of tie rods and carrier jointsnarrow profile, suitable for most vehiclesthree pull-out feet sizes for use on most passenger cars, and light industrial vehiclesscope of delivery:puller foot, opening 23 mm, puller width 55 mmpuller foot, opening 28 mm, puller width 55 mmpuller foot, opening 34 mm, puller width 63 mm Gross weight 3324 g Material Carbon Steel..

€79.92 €90.80 Ex Tax: €64.98

BGS Technic Ball Joint Ejector | opening 23 mm

for shifting/pushing the ball joint out of axle legs, drop arms, stabiliserespecially for working in narrow spacesuitable only for working on closed joints or joints with centre hole with fine thread spindle23 mm width, 55 mm height, for most models especially for MB W210 Gross weight 887 g..

€52.89 €55.36 Ex Tax: €43.00

BGS Technic Ball Joint Ejector | opening 28 mm

for shifting/pushing the ball joint out of axle legs, drop arms, stabilisersespecially for working in narrow spacesuitable only for working on closed joints or joints with centre holewith fine thread spindlewidth: 28 mm, usable height: 55 mmespecially for Audi A4, A6, A8, VW Passat etc., Opel Movano, MB W203 Gross weight 882 g..

€55.35 €55.51 Ex Tax: €45.00

BGS Technic Ball Joint Ejector | opening 34 mm

for shifting/pushing the ball joint out of axle legs, drop arms, stabilisersespecially for working in narrow spacesuitable only for working on closed joints or joints with centre holewidth: 34 mm, usable height: 55 mmespecially for VW LT as of 96, Mercedes Sprinter as of 95, lower suspension joints on VW T4 Gross weight 906 g..

€62.73 €61.86 Ex Tax: €51.00

BGS Technic Ball Joint Fork Separator Set | for Air Hammer | 5 pcs.

for separating ball jointsincludes 5 fork separators: fork opening: 20 - 24 - 30 - 35 - 42 mmsuitable for air air hammer kit e. g. BGS 3515high loosening power due to vibrationshaft diameter 10 mm Gross weight 2376 g Length 180 mm..

€183.02 €199.47 Ex Tax: €148.80

BGS Technic Ball Joint Puller for Impact Wrench | Ø 23 mm

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesopening on the support fork: 23 mmopening on the puller housing: 56 mmmax. pressure range: 59 mmdrive 19 mm Gross weight 958 g..

€123.00 €134.65 Ex Tax: €100.00

BGS Technic Ball Joint Puller for Impact Wrench | Ø 30 mm

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesmax. pressure range: 59 mm Drive profile External hexagon Gross weight 1016 g Hook foot opening 30 mm Hook foot thickness at the top 6 mm Hook length 55 mm Hex drive size 19 mm Spindle length 107 mm..

€111.19 €134.35 Ex Tax: €90.40

BGS Technic Ball Joint Puller for Impact Wrench | Ø 32 mm

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesopening on the support fork: 32 mmopening on the puller housing: 70 mmmax. pressure range: 92 mmdrive 26 mm Gross weight 2726 g..

€184.01 €194.75 Ex Tax: €149.60

BGS Technic Ball Joint Puller for Impact Wrench | Ø 39 mm

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesopening on the support fork: 39 mmopening on the puller housing: 80 mmmax. pressure range: 94 mmdrive 26 mm Gross weight 2452 g Hook foot opening 39 mm Hook foot thickness at the top 8 mm Hooked footh 50 mm Hook length 80 mm Hex drive si..

€193.85 €210.26 Ex Tax: €157.60

BGS Technic Ball Joint Puller for Impact Wrench | Ø 62 mm

suitable for cars, light trucks and SUVsolid execution for long product life timehardened pressure spindle and centering tipsuitable for impact wrenchesopening on the support fork: 62 mmopening on the puller housing: 100 mmmax. pressure range: 118 mm20 mm drive Gross weight 4620 g..

€212.54 €209.67 Ex Tax: €172.80

BGS Technic Ball Joint Puller | for Mercedes-Benz

for removal and installation of lower ball joints on the wishbonesuitable for Mercedes Benz models W124, W129, W201consisting of pressure frame, disassembly and assembly pressure piece and reducer ringallows a much easier renewing of ball jointsspindle with hexagon drive Gross weight 3090 g..

€292.57 €383.16 Ex Tax: €237.86

BGS Technic Ball Joint Separator Set | hydraulic | 12 t

for separating ball joints from axle partscan be used with mechanic and hydraulic spindlemade of forget SCM 440 steel, separating forks in 30, 34 and 40 mmmax. clamping width: (hydraulic): 95 mmmax. clamping width: (mechanic): 60 mmscope of deliveryspindle (hydraulic), 12 tspindle (mechanic)thrust Piecejaw 30 mm, forged steeljaw 34 mm, forged steeljaw 40 mm, forged steellower separatorspindle adapter Gross weight 8670 g..

€214.95 €285.70 Ex Tax: €174.76

BGS Technic Ball Joint Separator | 19 mm

suitable for many vehiclesforged Gross weight 954 g Fork opening 19 mm Max. clamping width 50 mm..

€41.70 €47.08 Ex Tax: €33.90

BGS Technic Ball Joint Separator | 20 mm

universally applicablefor all vehicle types for removing bearings for separating the ball plug when removing the ball joints Gross weight 722 g Fork opening 20 mm Max. clamping width 50 mm..

€38.62 €42.95 Ex Tax: €31.40

BGS Technic Ball Joint Separator | 20-22 mm

forgedclamping range in 2 positions adjustable: up to 30 and 55 mmfor extracting the ball joints on tie rods and stabilizers Gross weight 1210 g Fork opening 20 - 22 mm Surface finish Satin chrome plated..

€67.90 €65.25 Ex Tax: €55.20

BGS Technic Ball Joint Separator | 21 mm

universally applicableadjustable in 2 stepscan be used in passenger cars and vansheavy versionfor use with 17 mm hexagon socket Gross weight 1660 g Fork opening 21 mm Max. clamping width 80 mm Min. clamping width 50 mm..

€86.99 €98.18 Ex Tax: €70.72

BGS Technic Ball Joint Separator | 22 mm

pulling width: 22 mmpulling height: 47 mmoverall width: 70 mmspindle M16 x 1.5 / hexagon 17 mm / length: 78 mm Gross weight 540 g..

€42.80 €45.17 Ex Tax: €34.80

BGS Technic Ball Joint Separator | 29 mm

pulling width: 29 mmpulling height: 64 mmoverall width: 85 mmSpindle M18 x 1.5 / hexagon 19 mm Width 85 mm Gross weight 894 g..

€77.49 €65.25 Ex Tax: €63.00

BGS Technic Ball Joint Separator | 30 mm

universally applicableheavy duty finish with milled jawsspindle with ball tipfor removal of ball joints on cars, SUV and vanssuitable for operation with impact wrenchesfor use with 22 mm hexagon socket Width 43 mm Gross weight 2838 g Fork opening 30 mm Height 150 mm Length 190 mm Material Chrome Vanadium Steel Max. clamping width 52 mm..

€226.32 €239.20 Ex Tax: €184.00

BGS Technic Ball Joint Separator | extra large | for utitlity vehicles

for trucksforged typeuniversally applicable Gross weight 1186 g Hook foot opening 20 mm Hook foot thickness at the top 10,5 mm Hooked footh 29 mm Hook length 54 mm Length 270 mm Hex drive size 16 mm Clamping depth 10 - 40 mm Spindle length 75 mm..

€72.57 €67.91 Ex Tax: €59.00

BGS Technic Ball Joint Separator | hydraulic | 8 t

gives you a higher separating pressure, especially under narrow space conditions Gross weight 1975 g Fork width 23 mm Max. clamping width 56 mm..

€176.14 €180.72 Ex Tax: €143.20

BGS Technic Ball Joint Set | 7 pcs.

allows disassembly of ball joints in various sizessuitable for cars, light trucks and SUVs5 interchangeable forks 20 - 22 - 24 - 27 and 30 mmmaximum pressure range: 125 mmheavy duty Gross weight 6160 g..

€358.82 €418.89 Ex Tax: €291.72

BGS Technic Ball Joint Spreader Tool Set | 7 pcs.

for spreading the seats of shock absorbers and steering partswith 2 exchangeable spreading inserts (5 mm and 8 mm depth) and guide pins 8x10 mm (2x) and 10x12 mm (2x) for the shock absorber seat in the wheel bearing housing when changing the damper, for wishbone ball joint seat when disassembling the suspension strut etc.slipping off is avoided by strong guiding bolts that are stuck in the screw holesa spindle with 13 mm external hexagon pushes the spreader in the opening, no need to use a hamme..

€51.51 €90.06 Ex Tax: €41.88

BGS Technic Ball Joint Tool Set | with C-Frame

to replace ball joints, universal joints, brake anchor boltssuitable for SUVs, vans and other vehicles with large partsscope of delivery:step washer plate with large borestep washer plate with small boreC-frame with spindlesleeve, inner diameter: 44.4 mm, outer diameter: 50.8 mm, length: 45 mmsleeve, inner diameter: 56.6 mm, outer diameter: 63.4 mm, length: 45 mmsleeve, inner diameter: 69 mm, outer diameter: 76.1 mm, length: 56 mm Gross weight 7816 g..

€150.55 €154.88 Ex Tax: €122.40

Special Offers

Everyday Welding Supplies, Ireland's No1!

Shopping Cart

Menu