€51.64

The Knipex 74 05 Series High Leverage Diagonal Cutters come with a forged-on axle for heavy-duty work. Manufactured from chrome vanadium, heavy-duty steel, forged, multi stage oil-hardened. The precision cutting edges have been induction hardened (approx. 64 HRC). They provide high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. 20% less effort required compared to conventional diagonal cutters of the same length. Fitted with ..

€51.64

Made from oil-hardened vanadium electric steelVDE tested up to 10,000V and safe for work up to 1,000VConform to DIN EN/IEC 60900High loadable, elastic precision pointsLong half-round jaws, knurled gripping surfaces..

€52.21

1 x Knipex ErgoStrip® Universal Stripping Tool - Left HandedThe Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined are..

€61.37

The Knipex 73 05 Series X-Cut® Compact Diagonal Cutter requires 40% less force required compared with standard diagonal cutters of the same length. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. Its box-joint design provides the highest stability whilst retaining low weight. Cuts finest strands as well as multi-core cables and piano wires. With a large opening width for thicker cables. Fitted with multi-component, soft grip handles which are lightweight and compac..

€61.60

The Knipex DP50 Plastic Pipe Cutter will cut and chamfer all common domestic plastic drain pipes up to Ø 50mm, in a single operation. Its reversible high-quality ball-bearing steel blade can be easily replaced without tools. The DP50 provides a clean cut with no readjusting or deburring required, reducing potential blockages or damages of the seals. The blade is spring loaded, no inconvenient readjusting while cutting, and its durable housing is made of glass fibre reinforced plastic. Supplied..

€63.61

The Knipex Series 97 VDE Crimping Pliers are made from special tool steel, forged, and oil-hardened for crimping wire ferrules according to DIN 46228 parts 1 + 4.  Also for crimping in marked half-round dies for reliable connections between the sleeve, and the conductor. The Series 97 are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. There is also an integrated, insulated tether attachment point for a tool tether..

€64.21

Knipex StepCut Cable Shears for cutting multi-core stranded copper and aluminium cables.  They can also cut solid copper and aluminium cables up to 5 x 4mm². Not suitable for steel wire and hard drawn copper conductors. Made from forged, oil-hardened special tool steel with a chrome plated finish. The cutting edges are additionally induction-hardened, approx. 56 HRC. Cuts without crushing. Noticeably less effort: the gradations cut wires one after the other; cutting is up to 40% easier than wit..

€66.72

The Knipex VDE Screwdrivers are manufactured from chrome vanadium molybdenum steel, and has ergonomically optimised dual component handle for reduced fatigue and optimum transmission of force. The handle design also prevents rolling. Thw VDE Screwdrivers are tested up to 10,000V and safe for work up to 1,000V, and conform to DIN EN/IEC 60900. This 6 piece set contains: 2 x Phillips Screwdrivers: PH1 x 187mm, PH2 x 212mm. 4 x Slotted Screwdrivers: 3.0 x 202mm, 4.0 x 202mm, 5.5 x 232mm, 6.5 x..

€73.79

Knipex Mitre Shears for crush-free cutting of plastic, rubber and soft timber sections. Also for cutting ribbon cable up to 56mm wide. Its exchangeable cutting base with fence angle allows for 45°-cuts and markings for 60°-, 75°-, and 90°-cuts. The tool body is made of tool steel, rolled, oil-hardened with a chrome plated finish. Its handles are fitted plastic grips for added comfort. There is also an opening spring and locking lever...

€78.48

These Knipex VDE Multifunctional Installation Pliers have an opening spring integrated in to the joint. The activated locking lever keeps the cutting edges closed while other functions remain active.The intelligent latching mechanism enables you to 'grip' without opening the pliers. The cutting edge remains closed and protected.Supplied in a box.These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1..

€80.43

Knipex Compression Tool for crimping F, BNC and RCA connectors. Its robust design incorporates a rotatable head for different cable sizes, as well as a rotatable insert for various types of connector. The adjusting screw allows for various connector lengths. Suitable for RG 59 / 6 / 11 cable. Applicable among others for compression connectors Kathrein EMK 12; Cablecon F-56 CX3 5.1; Astro FKS 06...

€86.50

The Knipex TubiX® XL Pipe Cutter is suitable for both the electrical trade, as it cuts rigid steel conduits, and for stripping steel wire armoured cables. Specification: Cuts Pipes: Ø 6-35mm (1/4-1.3/8in).Max. Wall Thickness: 2mm.Knipex TubiX® XL Pipe Cutter with a spring-loaded QuickLock mechanism, holds the tool on the pipe once locked in place. Its cutting wheel is made of high-grade ball-bearing steel. High-quality needle-bearings enable the cutting wheel and four guide rollers to cut with..

€88.74

Knipex VDE StepCut® XL Cable Shears have a large cutting capacity and provide noticeably easier cutting than compact cable shears. The cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC. With dual cutting areas: the stepped cutting edge holds small and larger cables close to the joint during the cut; the front cutting edge cuts very large cables step by step. They offer easy one or two-handed operation with minimum handle opening for large cable diameters. The adjus..

€89.33

This Knipex Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Contains:  1 x 44 11 J1 Internal Circlip Pliers for bore holes Ø 12-25mm. 1 x 44 11 J2 Internal Circlip Pliers for bore holes Ø 19-60mm. 1 x 46 11 A1 External Circlip Pliers for shafts Ø 10-25mm. 1 x 46 11 A2 External Circlip Pliers for shafts Ø 19-60mm...

€90.56

Knipex Stripping Knife with four blade positions: folded, straight, angled and ratcheting. The ratchet function provides easy cutting, even for a variety of cable sheaths. Cuts very hard or tough plastic sheaths up to 7mm (wall thickness). A guide shoe protects the conductor insulation under the cable sheath. Fitted with an ergonomically designed, comfortable handle. The sickle-shaped, replaceable hook blade can be folded for safe transport. There is also a three-stage blade lock for safe handl..

€102.55

The Knipex Forged Wire Stripper is manufactured from high-grade special tool steel; forged, multi stage oil-hardened. Cuts: cable, wires, NM-B, BX and MC. Strips solid and stranded wires 10 to 20 AWG and cuts 6-32 and 8-32 screws without threading. Shear cutting blades offer 50% higher cutting capacity than competition and 25% cutting power reduction. It's easy to locate stripping holes by using one of the locating ridges. Fitted with ergonomic multi-component grips for added grip and comfort. ..

€105.61

This Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contents: 1 x 86 04 100 Pliers Wrench XS with one-handed fine adjustment, 10 positions, simply push for the easy adjustment to different work piece sizes. It has an enormous gripping capacity, the parallel jaw opening grips continuously up to 21mm width across flats. Smooth jaws allow for the gentle assembly of sensitive fittings, and parts with delicate surface finishes. The Wrench ..

€123.13

The Knipex TubiX® XL Pipe Cutter is suitable for plumbing, heating and air conditioning: easily cuts gas and water pipes made of copper, brass and stainless steel. The Cutter is also handy for the electrical trade: it cuts rigid steel conduits and is useful for stripping steel wire armoured cables. Specification: Cuts Pipes: Ø 6-76mm (1/4-3in).Max. Wall Thickness: 2mm.Knipex TubiX® XL Pipe Cutter with a spring-loaded QuickLock mechanism, holds the tool on the pipe once locked in place. Its cu..

€129.12

The Knipex PreciStrip16 Automatic Wire Stripper strips very fine, flexible wire as well as solid conductor. Does not strip THHN wire. Semi-circular grooved jaws hold the wire firmly in place as the parabolic blade removes the outer insulation. A fine adjustment dial enables accurate setting of the blade to special material requirements. The adjustable length stop is perfect for repetitive applications. Constructed from fibreglass reinforced plastic. Fitted with a dual-component handle that is c..

€153.20

1 x Knipex Bolt Cutters Multi-Component Grip 460mm (18in).These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handl..

€177.39

1 x Knipex Bolt Cutters Multi-Component Grip 610mm (24in).These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handl..

€199.56

The Knipex Insulated Universal Tweezers Set contains 5 stainless steel tweezers with VDE insulated handles for voltages up to 1000V. Suitable for a wide range of applications in the electronics industry. They have very good corrosion resistance to many corrosive materials.  Supplied in a 5 compartment tool roll made of hard-wearing polyester fabric. Contains: 1 x 92 47 01 Insulated 30°Angled Tweezers 5.1/2in.1 x 92 27 61 Insulated Pointed Tip Tweezers 5.1/4in.1 x 92 37 64 Insulated 30°Angled T..

€204.21

Knipex Self-Adjusting Crimping Pliers for crimping end sleeves (ferrules) in accordance with DIN 46228 Parts 1 + 4. Also suitable for all twin end sleeves (ferrules) up to 2 x 6mm² or 2 x AWG 8. Adjusts automatically to the desired size of end sleeve. An integral lock (with release mechanism) provides consistent crimping pressure. Whilst the ratchet mechanism (unlockable) allows for repetitive, high crimping quality. Manufactured from high-grade chrome vanadium electric steel, oil-hardened. Fit..

€204.69

Knipex Crimping Pliers for insulated and non-insulated end sleeves (ferrules) with a capacity of 35-50mm². Provides solder-free electrical connections. The lever transmission reduces the hand force up to 30% compared with regular crimping pliers. An integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure. The precision dies and ratchet mechanism (unlockable) allow for consistently high crimping quality. Made from Chrome high-grade vanadium electric steel; ..

€223.23

These Knipex 71 72 Series Bolt Cutters have heavy-duty, oil-hardened chrome vanadium steel jaws. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. An eccentric bolt provides precise adjustment (12 positions). High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. Ergonomically angled handles to minimise effort, fitted with sturdy non-slip, two-co..

€237.51

The Knipex Cobra® Water Pump Pliers are made from chrome vanadium electric steel, which has been forged and multi-stage oil-hardened for excellent durability. The gripping surfaces have special hardened teeth, with hardness approx. 61 HRC to ensure high wear resistance and stable gripping. A press-button action allows fast and firm adjustment directly on the workpiece. The pliers allow fine adjustment, for optimum adaptation to different sizes of workpiece and are self-locking on pipes and nuts..

€266.76

Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in a tool roll, made of hard-wearing polyester fabric with practical, adjustable quick release fastener. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore Holes Ø 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore Holes Ø 19-6..

€294.48

Knipex 95 36 Series VDE Cable Cutter for cutting copper and aluminium single conductors as well as multiple stranded cables. Not suitable for steel wire, wire ropes and fine-stranded (highly flexible) conductors. Precision-ground, hardened blades allow for a clean and smooth cut, without crushing and deformation. Its multi-component grips are VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A pinch guard prevents operators' fingers being pinched. Two-..

€442.11

The Knipex Pliers Wrench with a grey atramentized finish and dipped PVC handles. Smooth jaws for damage free installation of plated fittings, ideal when working directly on chrome. With scaling for presetting the width apart from the workpiece. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power. Replaces the need for sets of metric and imperial sp..

€642.43

The Knipex Robust45 Move Tool Case is made from impact-resistant polypropylene. Designed for the toughest conditions: dust-tight, waterproof and temperature-resistant, - 30°C to +80° C. This fit-to-fly case also features an air pressure compensation valve.The case comes with a total of 147 inserting options and a document compartment. The tool boards are made from dirt-repelling, twin-wall PP sheet with tool pockets and tool straps. Fitted with an ergonomic dual-component handle and padlock eyel..