€527.68

The DEWALT DCMPW1600 XR Pressure Washer is powered by 2 x 18V XR Li-ion batteries (NOT SUPPLIED). Its powerful 36V brushless motor allows the washer to deliver three operating modes, Low (70 Bar), High (80 Bar) and a Boost Mode (110 Bar). These modes increase the intensity of the flow of water from the source. In Boost mode, the pressure washer will allow a maximum of 8mins at 110Bar before reverting to the previously selected mode. Its durable body is fitted with large 20cm rubber wheels, idea..

€530.44

The DEWALT DCMCS574N XR FlexVolt Chainsaw comes as a Bare Unit, NO battery or charger supplied.The DEWALT DCMCS574 XR FlexVolt Chainsaw has an energy efficient brushless motor for longer run time. Being battery powered, it requires less maintenance than a petrol chainsaw, and has an auto-oiling system that keeps the chain lubricated. It also has a tooled chain tensioning system built to professional specifications, this helps to ensure that the chain remains reliably tensioned during use. The c..

€531.22

The DEWALT DCG409NT XR FlexVolt Advantage Grinder is supplied in a TSTAK™ Kitbox as a Bare Unit - No Battery or Charger.The DEWALT DCG409 XR FlexVolt Advantage Grinder uses intelligent electronics to sense what battery is in the tool and increase power and torque when using FlexVolt batteries. Providing up to 42% more power when used with XR FlexVolt batteries compared to standard 18V packs. The brushless motor provides increased run time and durability. An electronic soft start allows for a mo..

€533.27

The DEWALT DCM848P2 XR Brushless Polisher is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Side Handle1 x Hex Key1 x DCB115 Charger1 x Kit BagThe DEWALT DCM848 XR Cordless Polisher has a brushless motor for increased performance and run time. It has a variable speed trigger and dial for better control during car, headlight, windshield and glass polishing applications. The rubber gear case overmould reduces surface imperfections and improves gripping surface. It can also be held via the front..

€537.37

The DEWALT DCS577N XR FlexVolt High Torque Circular Saw comes as a bare unit, NO battery or charger supplied.The DEWALT DCS577 XR FlexVolt High Torque Circular Saw is part of the XR FlexVolt platform offering unrivalled runtime and performance. Heavy-duty construction applications can be completed without the need for mains power. Its high torque brushless motor delivers up to 5,800rpm of power, perfect for first fix applications. The diamond bore drive system transmits the generated high torqu..

€538.74

The DEWALT DCM565P1 XR Brushless Chainsaw is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x Charger 1 x DT20665 Chainsaw Chain and Bar 30cm.The DEWALT DCM565 XR Brushless Chainsaw is fitted with a brushless motor for improved power and run time. It has a lightweight, compact design. Fitted with a variable speed trigger for single-handed activation. The secondary auxiliary handle provides increased balance and control. Fitted with an automatic oiling system for reduced maintenance and a chain br..

€538.74

The DEWALT DCMBA572X1 XR FlexVolt Axial Blower is supplied with: 1 x 18/54V 9.0/3.0Ah Li-ion Battery1 x Fast Charger.The DEWALT DCMBA572 XR FlexVolt Axial Blower has a powerful, brushless motor that enables you to quickly clear debris. A variable speed trigger and speed lock provide increased control of the blower output. Its curved tube design creates rotational control and reduces fatigue. Supplied with inflator/deflator attachments for increased versatility. Specification: Air Volume: 600..

€539.51

The DEWALT DCF891P2T XR Brushless Impact Wrench is supplied with the following: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK™ KitboxThe DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench has a brushless motor for efficient performance and run time. With a 4-mode switch for accurate application control. The ergonomic design features a compact head length, making it ideal for use in confined areas. Specification: Bit Holder: 1/2in Hog Ring AnvilNo Load Speed: 0-2,000/min.Impact Rate: 0-3..

€539.51

The DEWALT DCF892P2T XR Brushless High Torque 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK™ KitboxThe DEWALT DCF892 XR Impact Wrench has an efficient brushless motor and 1/2in square drive plus detent pin allowing for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool ope..

€541.47

Complete the toughest jobs utilizing the power of the DEWALT 18V XR 1/2 in. High Torque Impact Wrench. Delivering 1356Nm of max fastening torque and 1898Nm of max breakaway torque, making it ideal for large sized pipe flanges, grooved couplings, wheel lugs, concrete anchor bolt setting and many other heavy-duty impact wrench applications. The PRECISION WRENCH mode is included to help prevent overtightening in forward, and run-off in reverse, for additional user control. Utilise the updated 4-mod..

€543.43

The DEWALT DCS438E2T XR Brushless Cut Off Tool is designed to cut through a variety of materials such as metal, tile, stone, plastic and drywall/fibre cement. With both forward and reverse capability, you can conveniently change the direction of the cut depending on the application. The included dust shroud with adjustable shoe and AirLock connection allows for convenient attachment to DEWALT extractors, whilst the integrated LED lets you work in dark spaces. POWERSTACK™ batteries deliver 50% m..

€544.36

The DEWALT DCS355P1 XR Brushless Oscillating Multi-Tool is supplied with: 1 x 5AH XR Li-ion Battery1 x 43mm Fast Cut Wood Blade1 x 43mm Wood with Nails Blade1 x Rigid Scraper Blade1 x Semi Circle Blade1 x Carbide Grout Removal Blade1 x Wood Detail Blade1 x Sanding Pad25 x Sheets Assorted Sanding Paper1 x Dust Extraction Adaptor1 x Depth Control Straight Cutting Guide1 x Universal Blade Adaptor1 x Multi-Voltage XR Charger1 x TSTAK™ KitboxThe DEWALT DCS355 XR Brushless Oscillating Multi-Tool deli..

€545.41

The DEWALT DCS378 XR Brushless Bandsaw is ideal for Electricians and Plumbers onsite cutting unistrut, conduit, threaded rod and much more. The 86mm cut capacity and variable speed dial and trigger allow for versatilty and control in applications. The tool free blade change and tracking adjusment deliver minimal interuptions to productivity. There is also a LED work-light for clear visibility and a retractable hanging hook for easy jobsite storage. Comes as a Bare Unit, No battery or charger su..

€547.89

The DEWALT DCM572X1 FlexVolt XR Blower is supplied with: 1 x 54V 3.0Ah XR Li-ion Battery1 x 8 Amp Li-Ion Charger1 x Concentrator Attachment DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.The DE..

€557.22

The DEWALT DCF870E2T Hyrdralic Impact Driver features an active valve system. The valve spring compensates for viscosity changes in the oil filled mechanism for improved performance and longevity. The tactile 3 - mode select feature allows the user to select easily different modes and speed controls.It has an ultra compact design, only 100mm from front to back. This makes it extremely ergonomic and allows improved access into confined spaces. A 9 LED ring light gives optimum brightness to delive..

€557.22

The DEWALT DCK2050E2T XR Brushless POWERSTACK™ Twin Kit contains the following: 1 x 18V DCD805E2T XR Brushless G3 Combi with an ultra-compact, lightweight design for use in confined spaces. An enhanced pivoting LED positioned on the foot offers greater visibility in dark and confined spaces. POWERSTACK™ batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Chuck: 13mmNo Load Speed: 0-650/2,000/min.Impact Rate: 34,000/bpmMax. Torque: 90NmCapacity: ..

€559.20

The DEWALT DCE825NG18 Spot & Cross Green Laser is compatible with 12V and 18V XR Slide Type Li-ion Batteries that provide extra-long run time and the convenience of rechargeable power tool batteries. A green beam laser diode provides full brightness for visibility and extended working range. It has a variable blink sequence for manual mode and a full-time pulse mode allows use with a detector. Fitted with a locking pendulum that helps to prevent damage to internal components. Supplied with: 1 ..

€559.46

The DEWALT 100 Metre DW03101 Laser Distance Measure calculates area and volume with automatic calculations that make job estimates quick and easy. It has an additional triangular area function. The integrated inclinometer can be used as a digital level to calculate continuous height and indirect horizontal distances. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isn’t accessible for linear measurement. The laser distance measure has a large 3-..

€560.81

The DEWALT DCK2532P2 XR Brushless Twin Pack contains the following: 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Masonry: 24mm, Metal: 13mm, Wood: 26mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped..

€570.15

The DEWALT DCS350 XR Threaded Rod Cutter has been designed as a dedicated tool for cutting threaded rod. Cuts rods with a shearing force, minimising the risk of burring on a cut. There is no moving blade, no sparks and no metal chips. Accessories can be changed by using the on-board hexagon key and there is also an LED for visibilty in dark areas. Supplied with a Metric Cutting Die M6-M12. Bare Unit, No Battery or Charger Supplied. Specification Cutters: M6, M8, M10 & M12.Weight: 4.1kg...

€571.01

1 x DEWALT DWE625KT 1/2in Plunge Router 110V Version.The DEWALT DWE625KT 1/2in Plunge Router has a one-touch Plunge Lock for increased precision. 3-stage depth stop adjustment enables recesses of various depths to be machined in one operation without time-consuming setting up. There is also a two-column precision guide with large phosphor bronze bushes for plunging accuracy. The design incorporates a high-quality die-cast aluminium housing and large comfortable handles. The on/off switch and pl..

€574.16

The DEWALT DCM200 XR Brushless Band File has been engineered for tough commercial applications, rotating up to 1,700 m/min. This power is controlled with a variable speed trigger and speed setting dial. A 173° pivoting arm enables the user to take full advantage of the portability and versatility and to access hard to reach spaces. With fully tool-free belt change and adjustments. There is also a powerful and directional LED work light. Supplied with: 1 x Side Handle, 1 x Standard 13mm Contact ..

€574.16

The DEWALT DCMCS575N XR FlexVolt Chainsaw comes as a Bare Unit. No battery or charger supplied.The DEWALT DCMCS575 XR FlexVolt Chainsaw has an energy efficient brushless motor for longer run time, and delivers performance on a par with 50cc petrol machines. Being battery powered, the chainsaw requires less maintenance than a petrol chainsaw, and has an auto-oiling system keeping the chain lubricated. The DCMCS575 XR has a tooled chain tensioning system built to professional specifications, help..

€575.64

The DEWALT DCLE34031N 3 x 360° Multi Line Laser comes in a carry case with a target card and a bracket. NO battery or charger supplied.DEWALT DCLE34031 Multi Line Laser with 3 x 360° laser lines to aid in full room layout. Its green beam diode ensures better beam visibility on the job site, even in brighter conditions. Over moulded housing protects the tool from harsh job site conditions. Fitted with a pendulum lock that helps prevent damage to internal components during transportation. It come..

€588.92

The DEWALT DCM5713X1 FlexVolt XR String Trimmer is supplied with: 1 x 18/54V FlexVolt 9.0/3.0Ah Li-ion Battery1 x Charger1 x 7.5m x 2.0mm Line..

€588.92

The DEWALT DCS365N Cordless XPS 184mm Mitre Saw is supplied as a Bare Unit, NO battery or charger supplied.The DEWALT DCS365 Cordless XPS Mitre Saw is fitted with a double insulated 65mm fan cooled motor with replaceable brushes for maximum power in hard wood. The mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 60° right and 0 and 50° left. It has a large dual sliding fence mechanism that gives maximum support in large material cuts at any an..

€590.70

The DEWALT DCMBL777X1 FlexVolt XR Axial Blower is supplied with: 1 x DCB547 XR FlexVolt Slide Battery 18/54V 9.0/3.0Ah Li-ion.1 x 18-54V DCB118 XR FlexVolt Multi-Voltage Fast Charger.The DEWALT DCMBL777 FlexVolt XR Axial Blower delivers powerful performance for quick and effortless cleanups. Its variable speed feature allows users to adjust the airflow according to the task at hand, with blowing speeds of up to 200 km/h. The efficient brushless motor not only enhances power but also extends the..

€592.66

The DEWALT DCD470 XR FlexVolt Right Angle/Diamond Core Drill delivers high-speed drilling performance, making it ideal for drilling within concrete block, brickwork or wood. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The two variable speed function allows you to match the appropriate speed and torque depending on application. The Perform and Protect™ E-Clutch detects reactionary torque caused by a bi..

€593.65

The DEWALT DCM563P1 Cordless Hedge Trimmer is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x Multi-Voltage ChargerThe DEWALT DCM563 Hedge Trimmer has a compact and lightweight design for less user fatigue whilst trimming. With 55cm dual-action, laser-cut blades that have a 19mm cutting gap. Made from hardened steel for longer life and lasting sharpness. The wraparound auxiliary handle provides a comfortable grip in multiple orientations. With Xenoy TM housing for excellent durability and impact..

€604.48

The DEWALT DCK318PD XR Brushless Kit, contains the following: 1 x 12V DCD706 XR Brushless Sub-Compact Combi Drill has an extremely compact design, only 168mm long, allowing you to get into small, tight spaces. The Combi Drill has a 15 position adjustable torque control for consistent screwdriving, into a wide variety of materials. Chuck: 10mm Keyless.No Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpm.Max. Torque: 57.5Nm, 15 Settings.Capacity: Masonry/Steel 10mm, Wood 20mm.Weight: 1.2kg...