€41.72

Gross weight 2114 g..

€43.69

with spindle nut Gross weight 394 g Length 305 mm Wrench size 17 mm Packaging suitable for wall hanging No..

€44.28

spindle:spindle length: 235 mm (without hexagon)thread: M20 x 2.022 mm hexagon drivesleeve nutlength 70 mm30 mm hexagon drive Gross weight 876 g..

€47.04

for proper and quick installation of rubber bushings (silent blocks) on front axle bracketssuitable for Audi A2, VW Polo IV 9N (2002 - 2005), Skoda Fabia I, Seat Ibiza 6L (2002 - 2006) and Cordoba 2002to be used as OEM 3062, 3253/8 Gross weight 1182 g Material Steel (S45C) To be used as OEM1 3062 | 3253/8 Audi To be used as OEM2 3062 | 3253/8 Volkswagen To be used as OEM3 3062 | 3253/8 Skoda ..

€50.18

made from aluminiumscope of delivery:3 drift pins: Ø 11 - 16 - 21 mm13 pressure pieces:10 mm internal diameter x 12 mm external diameter12 mm internal diameter x 14 mm external diameter14 mm internal diameter x 16 mm external diameter15 mm internal diameter x 17 mm external diameter16 mm internal diameter x 18 mm external diameter18 mm internal diameter x 20 mm external diameter19 mm internal diameter x 21 mm external diameter20 mm internal diameter x 22 mm external diameter22 mm internal diamet..

€61.99

for removing and installing the rear upper and lower bushes on trailing arm suspensionssuitable for following models:Opel (Vauxhall) Vectra 1.6, 1.8, 2.0 (1995-) and 2.5 (1996-)can be used directly on car, without removing the trailing armnut with thrust bearing Gross weight 1614 g..

€63.96

for flush fitting and centering bearing rings and tapered roller bearingsincl. one pin and pressure piecea with the following external diameters: 40 - 44 - 50 - 59 - 63 - 65 - 72 - 76 - 81 mmreception 14 mm Gross weight 1740 g..

€66.72

used for mounting silentblocks on Fiat rear axlessuitable for following modells:Fiat Stilo (2001 - 2007)Fiat Bravo (as of 2007)Lancia Delta (as of 2008)scope of delivery:pressure piece with recess and 3 pinspressure piece Ø 79 x 68 mmspindle M12 x 1.75 with bearing nut, length: 255 mm19 mm hexagon drive socket Gross weight 1746 g..

€77.74

for removing / installation of the rear trailing arm bushsuitable for Ford Fiesta / Ka (from 1996)can be used directly on vehicle, without removing the trailing armscope of delivery:spindlespindle nutpushing cupreception cupinsertion cupspindle nut with bearing Gross weight 2866 g..

€87.58

for the removal / installation of the rear bush on the front lower wishbonecan be used without removing the wishbonesuitable for the following models: Seat Cordoba III (2003), Skoda Fabia (2000), VW Polo IV (2002)spindle nut with 24 mm hexagon drive Gross weight 3510 g To be used as OEM1 473 | 3301 | T10030 | T30035 Seat To be used as OEM2 473 | 3301 | T10030 | T30035 Skoda To be used as OEM3 473 | 3301 | T10030 | T30..

€90.92

for easy and safe removal and replacement of silent blocks on front axle wishboneno removal of the console required, minimizing the workloadcontains spindle, spindle extension, shoulder nut spindle adaptor M10 x 1.25 made of S45C carbon steelspacer, pressure part, centering mandrel made from aluminium alloy Gross weight 3564 g..

€103.12

for removal, installation and alignment of rear axle bushes on Renault Laguna IIhigh-strength ball bearing fitted spindle Gross weight 2756 g..

€103.32

for easy and safe removal and replacement of silent blocks on the vehicleno removal necessary, minimises the workloadcontains spindle, spindle extension, shoulder nut spindle adaptor M10x1.25 made of S45C carbon steelspacer, pressure piece, centering ring made from aluminium alloy Gross weight 3226 g..

€111.98

for removing the inner bearing ring on wheel hubspressure piece for support on the wheel hub stumppre-tension bracket ensures a secure hold on the bearing ringsuitable for VW and Audi models Gross weight 1752 g..

€113.14

forged and hardened carbon steelfor assembly and disassembly of wheel nuts and with built in suspension strutscope of delivery:9 pressure pieces with external diameters of 55.5 - 59 - 62 - 65 - 66 - 71.5 - 73 - 78 - 84 mmpressure sleeves with counter plate (non-locking), inner diameter 75.5 - 82.9 mmpressure sleeve (open on both sides), inner diameter 69.9 mm3 wheel hub puller screws M12 x 1.53 wheel hub puller screws M14 x 1.5ball bearing spindle, hexagon 32, Ø 22 x 280 mm ..

€115.25

for differential suspension bushes at rear axlescope of delivery:spindle M14 x 2 (long), M12 x 1.75 (short), length: 300 mm10 mm drivenut 22 mm drivebell, inner Ø: 60, 70 mm, outer Ø: 80 mm, length: 70 mmspindle pressure washer, outer Ø: 67 mm, thickness: 25 mmthrust washer, inner Ø: 27 mm, outer Ø: 70 mm, thickness: 16 mmspindle pressure washer, outer Ø: 48 mm, thickness: 16 mmaxial deep groove ball bearing, outer Ø: 42 mmprofile disc, inner Ø: 50 mm, outer Ø: 80 mm Gross w..

€117.98

universal use on wheel bearingsallows disassembly and assembly of the wheel hub and the wheel bearings directly on the vehiclegentle installation by exerting pressure on the outer bearing ringsuitable for axle tubes and axles with bearing adjacent to a bundscope of delivery:pressure plates with diameters of: 50 - 55 - 59 - 63.3 - 66.6 - 70.3 - 71.5 - 73.1 - 73.4 - 74.8 - 77.5 - 81.5 - 83.4 mmsleeves with following diameters: 76 - 86 - 91 - 102 mm3 extractor bolts M12 x 1.51 extractor bolt M14 x ..

€117.98

for removing / installing the rear wheel bearing and rear axle flange on Mercedes-Benz types W124, 129 201, 202 Gross weight 3210 g..

€120.29

for renewing the rear control arm bushingsuitable for all Mercedes-Benz W170 (SLK) and W202 (C-class) models Gross weight 5296 g..

€122.98

suitable for the assembly of bearing shells, sealing rings and rubber bandsparticularly helpful when used with hydraulic pressesincludes pressure washers with Ø 18 - 65 mm (1 mm steps) and Ø 74 mm180 mm x Ø 12 mm metal handle, for use with hammer Gross weight 8012 g Material Carbon steel..

€137.66

facilitates assembly and disassembly of wheel hub bearing unitsuitable for VW T5 and Touareg with 16" rimsscope of delivery:high-strength ball bearing fitted spindlepressure plate with 8 holes5 pressure bolts1 pair of divided dismantling shells1 dismantling plate1 pair of divided mounting shells1 mounting plate Gross weight 9013 g..

€137.74

grinder for wheel hub rim holebristles made from nylon fiber with silicon carbide and diamond abrasive grainvariation of speed (rpm) influences hardness and aggressivity of the abrasive brushscope of delivery:1 wheel hub rim hole grinder1 adapter for electric drill Gross weight 200 g..

€139.33

for removal and installing of the rear axle carrier rubber bushingsallows renewing of the bushes without removing of the carriersuitable for BMW X5 E53 Gross weight 6676 g..

€139.81

for disassembly and assembly of the two front differential rubber bushings in the rear axle carriersuitable for bushings with OE number 33 316 792 873 and comparable bushings of other manufacturersfor the following vehicle models:750i (F01) 4.4L V8, 750Li (F02) 4.4L V8, 535i GT (F07) 3.0L, 550i GT (F07) 4.4L V8550i GT xDrive (F07) 4.4L V8, 750i xDrive (F01) 4.4L V8, 750Li xDrive (F02) 4.4L V8760Li (F02) 6.0L V12, 528i (F10) 3.0L, 535i (F10) 3.0L, 535i GT xDrive (F07) 3.0L535i xDrive (F10) 3.0L, ..

€144.06

for disassembly and assembly of the rear trailing arm bushesremoval and installation can be done directly on the carsuitable for following models:Ford Focus MKI (as of 1998 - 2007), MKII (as of 2007 - 2012), Kuga (as of 2008 - 2012), C-Max (as of 2003 - 2007)Mazda BK (as of. 2005 - 2009), CR (as of 2005 - 2010)Volvo V50 (as of 2004 - 2012), S40 (as of 2003 - 2012) Gross weight 5018 g..

€145.63

for disassembly and assembly of the rear differential rubber bushing in the rear axle carriersuitable for the following vehicle models:BMW 5, 6, 7 (F01, F02, F04, F06, F07, F10-F13, F18)suitable for rubber bushing with original spare part number OE 33 316 792 872to be used like OEM 330 020scope of delivery:1 disassembly sleeve1 disassembly plate2 mounting plates1 spindle1 spindle nut Gross weight 4044 g To be used as OEM1 330020 BMW..

€150.36

spare grinding wheel suitable for BGS 97463 pcs.inner-Ø 80 mmouter-Ø 150 mm Gross weight 312 g..

€153.19

for non-damage mounting of bearings and sealing ringssuitable for most bearingsscope of delivery:33 nylon and 3 metal mounting sleevespressure piece sizes: 10 - 26 mm / 10 - 30 mm / 10 - 35 mm / 12 - 28 mm / 12 - 32 mm / 12 - 37 mm / 15 - 32 mm / 15 - 35 mm / 15 - 42 mm / 17 - 35 mm / 17 - 40 mm / 17 - 47 mm / 20 - 42 mm / 20 - 47 mm / 20 - 52 mm / 25 - 47 mm / 25 - 52 mm / 25 - 62 mm / 30 - 55 mm / 30 - 62 mm / 30 - 72 mm / 35 - 62 mm / 35 - 72 mm / 35 - 82 mm / 40 - 68 mm / 40 - 80 mm / 40 - 9..

€154.13

facilitates assembly and disassembly of wheel hub-bearing unitsuitable for the following Opel models:Ford Galaxy, S-MaxLand Rover Freelander 2Volvo S80, V70, XC60, XC70scope of delivery:high-strength ball bearing fitted spindlepressure plate with 8 holes4 pressure bolts, 8 mm4 pressure bolts, 12 mm1 pair of divided dismantling shells1 dismantling plate1 pair of divided mounting shells1 mounting plate Gross weight 10082 g..

€156.65

suitable for BMW 3-series (E36, E46, E46 Compact)for removing original bushes and removing & installing new style slotted busheshardened Gross weight 3456 g..