€26.81

Gross weight 128 g To be used as OEM1 3078 Audi To be used as OEM2 3078 Seat To be used as OEM3 3078 Skoda To be used as OEM4 3078 Volkswagen..

€29.40

also as replacement for BGS 8153, 8155to be used as OEM T10123 Gross weight 188 g To be used as OEM1 T10123 Audi To be used as OEM2 T10123 Seat To be used as OEM3 T10123 Skoda To be used as OEM4 T10123 Volkswagen..

€34.32

for locking the flywheel during loosening / tightening of the crankshaft belt, pulley and flywheelconsists of fastening bolts and locking clawto be used as OEM 3067 Gross weight 200 g To be used as OEM1 3067 Audi To be used as OEM2 3067 Seat To be used as OEM3 3067 Skoda To be used as OEM4 3067 Volkswagen..

€34.44

for locking the drive sprocket of high the pressure pumpis required when adjusting the valve timingsuitable for VAG 3.6l 6-cylinder 4-valve engines, built inVW Passat (357) (3C2) (3C5) starting from 2006VW Touareg (7L6) (7LA) starting from 2006Audi Q7 (4LB) starting from 2007engine codes: BLV, BHL, BHKto be used as OEM T10332 Gross weight 130 g To be used as OEM1 T10332 Audi To be used as OEM2 T10332 Volkswagen To be used..

€45.26

are used instead of the front panel mounting boltsallows the panel to be slid away from the engine without disconnecting all fluid pipes etc.required for e. g. works on the camshaft drivesuitable for Volkswagen T5 (as of 2004)includes 4 bolts M8 x 1.25, Ø 13 mm, length 200 mmto be used as OEM T10228 Gross weight 930 g To be used as OEM1 T10228 Volkswagen..

€45.51

for adjusting the timing during replacement of the timing chain, renewing of the cylinder head gasket, etc.suitable for the following models:VAG 1.2 TSI/TFSI with engine codes CBZA, CBZB, CBZCAudi models A1 and A3VW New Beetle, Caddy, Golf, Jetta, Polo, TouranSkoda Fabia, Fabia Combi, Wildwasser, Oktavia,Roomster, YetiSeat Altea, Ibiza, Leon, Toledoscope of delivery:crankshaft locking tool, to be used as OEM T10340camshaft locking tool, to be used as OEM T10414guide pin, to be used as OEM-T10341..

€46.74

for locking the flywheelto be inserted into the bore of the transmission housingfits on VW, Skoda, Seat with 1.9l diesel enginese. g. for motor recognition 1Z, AFN, AHU, ALE, AVG Gross weight 166 g..

€49.08

is needed for changing of the tooth belt on Audi and VW with the following engines: AUDI A4 2.4 2.8 1997 - 2002, A6 2.4 1997 - 2002, A6 2.8 1997 - 2002, A8 2.8 1997 - 2002, S4 2.7 Turbo 1997 - 2001 or Volkswagen with ACK, ALG, APR, AQD engines and Passat 2.4 1996 - 2002, Passat 2.8 30v 1996 - 2001avoids distortion of the camshaft during tooth belt assemblyallows easy and precise assembly of the tooth beltsuitable crankshaft locking tool available under BGS 8155-6 Gross weigh..

€49.08

is needed for changing of the tooth belt on Audi and VW with the following engines: V8 3.3L to 4.2L 5-valve engines in Audi A6, A8 with e. g. engine codes AKB, AUX, AYS, AQJ, ARS, ART, AWN, BBD, BCY, BFM 1998 - 2003 and VW Touareg and Phaetonavoids distortion of the camshaft during tooth belt assemblyallows easy and precise assembly of the tooth beltto be used as OEM T40005 Gross weight 1614 g To be used as OEM1 T40005 Audi To be used as O..

€54.61

for aligning the camshaftssuitable for V6 R32 3,2L FSI W8 and 6.0L W122 alignment rulersto be used as OEM T10068 & T10068A Gross weight 902 g To be used as OEM1 T10068 | T10068A Audi To be used as OEM4 T10068 | T10068A Volkswagen..

€54.86

used for tensioning the timing chainsuitable for Audi A6 from 2005 4.2 l direct injection 8-cyl., 4 valveto be used as OEM T40079 Gross weight 224 g To be used as OEM1 T40079 Audi..

€60.27

Gross weight 1000 g..

€62.98

for removing the high pressure pump pulley on 1.6 / 2.0l and 6-cyl. TDI common rail enginescan be used as OEM T40064 Gross weight 508 g To be used as OEM1 T40064 Volkswagen..

€69.86

suitable for VW Phaeton 2003, Touareg as of 2003, Transporter as of 2004 with 5- and 10-cylinder diesel enginesto be used as OEM T10193 or T10194for adjusting the camshaft when checking and repairing the engineno twisting of camshafts, allows precise adjustment Gross weight 640 g To be used as OEM1 T10193 | T10194 Audi To be used as OEM2 T10193 | T10194 Seat To be used as OEM3 T10193 | T10194 Skoda To be..

€70.60

set for working and locking the tooth belt tensioner rollsis needed when changing the tooth belt and during general engine repair jobsfor the most common VW, Audi, Seat, Skoda fuel and Diesel enginesspanners can be used as a counterholderno displacing of tooth belt tension when tightening the nut3 tensioner pulley wrenches in different lengths and offset shapes to be used as OEM T10020, V159, 33873 locking pins for tooth belt spanners:1.6 mm used as OEM T400112.5 mm used as OEM T030064 mm used a..

€72.57

suitable for the following VAG models with 1.2 L 3-cylinder engines:Volkswagen:Polo 1.2 L, 6V, 3-cylinder, engine codes AWY, BMD, BBMPolo 1.2 L, 12V, 3-cylinder, engine codes AZQ, BME, BZG, CGPA, CGPB,Skoda:Fabia 1.2 L, 6V, 3-cylinder, engine codes AWY, BMDFabia 1.2 L, 12V, 3-cylinder, engine codes AZQ, BME, BZG, CEVA, CGPA, CGPBRapid 1.2 L, 12V, 3-cylinder engine code CGPCRoomster 1.2 L, 12V, 3-cylinder, engine codes BME, BZG, CGPAPraktik Rapid 1.2 L, 12V, 3-cylinder, engine codes BZG, CGPASeat..

€73.80

for removing the high pressure fuel pumpto be used OEM T10489 suitable for VAG 1.4 L, 1.6 L, 2.0 L TDi engines, built following vehicle models:Volkswagen Golf (2013-)Audi A3 (2013-1)Skoda Rapid (2012-)Skoda Octavia (2013-)Skoda Fabia (2014-)Skoda Superb (2015-)Skoda Kodiaq (2016-)Seat Alhambra (2011-)Seat Ibiza (2008-)Seat Leon (2013-)Seat Ateca (2013-) Gross weight 586 g To be used as OEM1 T10489 Audi To be used as OEM2 T10489 Seat ..

€75.77

for checking and setting the camshaft timingsuitable for Audi V6, V8 and V10-engines with chainscope of delivery:camshaft locking tool to be used as OEM T40070crankshaft locking pin to be used as OEM T40069chain tensioner locking pin to be used as OEM T40071 Gross weight 1126 g To be used as OEM1 T40058 | T40070 | T40069 | T40071 Audi To be used as OEM2 T40058 | T40070 | T40069 | T40071 Seat To be used as OEM3 T40058 ..

€77.49

suitable for engine timing tool set BGS 8924 Width 305 mm Gross weight 1030 g Height 85 mm Length 390 mm Material Plastic Packaging suitable for wall hanging No..

€77.74

for adjusting the camshaftsto be used as OEM T40047ensures correct setting of the hall sensor wheel, an incorrect setting may cause bad idle and lazy response leadsuitable for cars with 4.2 liter V8 engines: AUDI A6 (2005 - 2006), A8 (2004 - 2006), Quattro (2003 - 2005), S4 (2004 - 2009), VW Phaeton (2004 - 2006) with engine codes: BNK - BFM - BGK - BAS - BHF - BGH Gross weight 1070 g To be used as OEM1 T40047 Audi To be used as OEM2 T..

€77.74

suitable for the following models:VW Lupo, Polo, New Beetle, Golf, Bora CaddySeat Ibiza, Cordobaengine codes: ARC, AVY Gross weight 2322 g Length 770 mm To be used as OEM1 T10028 Seat To be used as OEM2 T10028 Skoda To be used as OEM3 T10028 Volkswagen..

€79.70

for adjusting the pump-nozzle unitssuitable for 3- and 4-cylinder engines and for pump-nozzle units with old and new solenoid valve nut Gross weight 1298 g..

€80.69

for safe turning of the crankshaft on Audi V6 and V8 gasoline enginescombines the applications of two tools in one setsuitable for the following vehicle models:Audi A6, A7, A8, RS4, RS5, RS6, RS7, S6, S7, S8 (2010-)with following engines:4.0L engine codes LXB, CPAA, CHVA, CHNA4.2L engine codes CEUA, CEUC, CGTA, CRDB, CTFA, CTGA, CTGE, CWUB, CWUC, DDTA, CFSAscope of delivery:1 crankshaft rotating tool, to be used like OEM T402571 crankshaft rotating tool, to be used like OEM T40272 ..

€84.13

suitable for VW 1.4 / 1.6 / 2.0 l engines (engine codes ADX, AEA, AEE, AEH, AEX, AFH, AFK, AGP,AGR, AHW, AJM, AKL, ALN, AMF, ANA, ANY, APE, APF,ARM, ATJ, AUA, AWH)for counterholding the belt pulley of 4-valve engines with pin diameter 11.5 mmalso for counterholding the belt pulley of 2-valve enginessuitable for the following models:VW: Beetle, Bora, Caddy, Golf, Lupo, Polo, Sharan, Touran, TransporterAudi: A2 / A3 / A4 / A6, TTSkoda: Fabia, Octavia, Superb Gross weight 2..

€86.99

for fixing the camshaft in the setting positionis required when changing the timing beltto be used as OEM T10110 Gross weight 394 g To be used as OEM1 T10110 Audi To be used as OEM2 T10110 Seat To be used as OEM3 T10110 Skoda To be used as OEM4 T10110 Volkswagen..

€87.08

for securing the camshaft during inspection and adjusting the valve control timingsuitable for VW LT 2.8D (1996-2006)suitable for following engine codes:AGK, ATA, AUH, BCQto be used as OEM 3445 Gross weight 940 g To be used as OEM1 3445 Volkswagen..

€89.79

for adjusting / locking the crankshaft when working on camshaft drive or replacing cylinder head gasketsuitable for:TDI Common Rail engine EA288for following vehicles:1.4 TDI Audi A11.4 TDI Seat Ibiza, Toledo IV1.4 TDI Skoda Fabia III, Rapid (2012)1.4 TDI VW Polo V1.6 TDI Audi A1, A3 8V, A4 B9, Q21.6 TDI Seat Leon III, Toledo IV, Ateca1.6 TDI Skoda, Octavia III, Rapid (2012), Superb III, Karoq1.6 TDI VW Beetle, Golf VII, Jetta VI, Tiguan, Touran II, T-Roc, Passat B8, CC, Scirocco III2.0 TDI Audi..

€96.33

suitable for 2.0 L FSI and TFSI engines, e. g. Golf, Touran, Audi A3, engine codes: AWA, BMB, AXWIncludes:alignment pin, to be used as OEM T10060Alocking pin, to be used as OEM T10115locking pin, to be used as OEM T40011chain tensioner, to be used as OEM 3366camshaft locking tool, to be used as OEM T10252tensioning screw, to be used as OEM T10092pin-type face wrench, to be used as OEM T10020 Gross weight 2228 g To be used as OEM1 T10020 | T10252 | T1009..

€98.30

fixawide application range because of adjustable camshaft locking tool, to be used as OEM 3391 or OEM 3243crankshaft locking bolt to be used as OEM 3242is needed for changing the tooth belt on Audi and VW with following engines:AUDI A4 2.4 2.8 1997 - 2002AUDI A6 2.4 1997 - 2002, A6 2.8 1997 - 2002AUDI A8 2.8 1997 - 2002, S4 2.7 Turbo 1997 - 2001Volkswagen with ACK, ALG, APR, AQD enginesVW Passat 2.4 1996 - 2002, Passat 2.8 30v 1996 - 20012 valves V6 engines e.g. Audi 80, 90, A4, A6 1994 - 1997 A..

€102.14

to check and the adjust the camshaft timingrequired when replacing timing chainssuitable for VAG FSI and TFSI 1.4L and 1.6L enginessuitable for the following models:Audi A3 (03-10)Seat Ibiza, Leon, AlteaSkoda Octavia (04-09), Fabia (07-09), Superb (09-10), Roomster (06-09)VW Golf (03-09), Golf Plus (05-09), Jetta (06-09), Passat (05-09), Polo (02-08), Scirocco (09-10), Tiguan (07-09), Touran (03-09), Eos (06-09)engine code AXU, BLG, BAG, BMY, BKG, BMK, BLF, CAVA, BLN, CAVB, BLP, CAVC, CAVE, CAVF..