Cebora Power Plasma Cutter 2025/M

POWER PLASMA 2025/M was reated to meet the need of working with an easy to handle, easy to use power source with minimal system requirements (2,3 KVA at the maximum power) yet able to ensure excellent quality cutting on all metals.

POWER PLASMA 2025/M weights just 9,4 kg including the torch, and requires single-phase power supply; it works with compressed air provided at a pressure of 3.5 bar, with an air flow of just 55 l/min (and may thus be powered by a 25-l compressor).

• Pilot arc “on air” operating mode, which makes it possible to work even on painted or coated metals.
• Equipped with a 4 m new Cebora CP41C plasma cutting torch, with “on air” ignition without high frequency.
• High electromagnetic compatibility, per IEC 60974-10, allowing the power source to be used in the vicinity of electronic equipment (such as computers, PLC, etc.).
• Explosion-proof protection of the air reducer unit.

The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%). The power source can also be powered by motor-driven generators of adequate power (min. 4KVA).

Technical Specification

• Voltage: 230v 50/60Hz
• Thickness cut on Steel 6mm (Recommended) 8mm (Max) 10mm (Severance)
• Fuse Rating 10A
• Torch Length 4m
• Weight 9.4kg
• 2 years warranty